Difficulties in the Machining Super Duplex Stainless Steels

Open access


Super duplex stainless steels are used in increasingly more areas. The machinability of duplex stainless steels is generally poor. We performed dry turning tests on G X2CrNiMoCuN 26-6-3-3 casted superduplex steel, using two different PVD coated cutting inserts. One of them was coated with TiAlN and other with TiAlSiN. Strong burr and built-up edge formation were observed during our machining experiments; these damaged the edges of the tools. The shortened tests did not show significant difference betwen the effect of the coatings.

If the inline PDF is not rendering correctly, you can download the PDF file here.

  • [1] Bödök K.: Az ötvözetlen gyengén és erősen ötvözött szerkezeti acélok korrózióállósága különös tekintettel azok hegeszthetőségére. Corweld Budapest 1997. 225–252.

  • [2] Nippon Steel & Sumikin Stainless Steel Corporation https://nssc.nssmc.com/en/campaigns/duplex/orientation/nssc2120.php

  • [3] Gunn R. (Ed.).: Duplex stainless steels: microstructure properties and applications. Woodhead Publishing. 1997. 6–7.

  • [4] Samdvik Coromant Tudástár https://www.sandvik.coromant.com/hu-hu/knowledge/materials/pages/workpiece-materials.aspx

  • [5] de Paiva J. M. Torres R. D. Amorim F. L. Covelli D. Tauhiduzzaman M. Veldhuis S. Fox-Rabinovich G. Frictional and wear performance of hard coatings during machining of superduplex stainless steel. The International Journal of Advanced Manufacturing Technology 92/1–4. (2017) 423–432. https://doi.org/10.1007/s00170-017-0141-4

  • [6] The Outokumpu Handbook of Stainless Steel 2018.75 https://otk-sitecore-prod-v2-cdn.azureedge.net/-/media/from-sharepoint/documents/product/outokumpu-stainless-steel-handbook.pdf?revision

Journal information
All Time Past Year Past 30 Days
Abstract Views 0 0 0
Full Text Views 77 77 7
PDF Downloads 70 70 11