A graph of the changes in an engine’s operating speed can be used to assess the quality of the combustion in its cylinders. In this paper, the authors carried out tests on a Buckau-Wolf R8VD-136 ship engine, which was directly driving the propeller. This engine is owned by the Laboratory of Marine Engine Rooms at the Maritime University of Szczecin. For standard rotational speeds ranging from 200 to 280 rpm, with increments of 20 rpm, the authors measured the changes in the instantaneous speed for the engine’s normal operating conditions (reference graphs) as well as with one of the cylinders being out of operation. A no-combustion situation was successively introduced into each cylinder for each preset rotational speed. The obtained graphs of the instantaneous speed were then used to determine certain quantitative indicators, which the authors believe can provide information about the technical condition of the engine. The analysis concerned the averaged graphs of the speed under the conditions set for five consecutive engine operating cycles. The indicators that were calculated included the maximum difference in the speed over the engine’s full operating cycle, the uniformity of the engine speed and the differential speed area factor, the latter a term that has been proposed by the authors. The values of the individual indicators that were obtained from the reference graphs and the graphs with no combustion in one of the cylinders were compared. All indicators are sensitive to cylinder misfire. Conclusions were then drawn on the usefulness of these indicators in assessing the condition of an engine.
If the inline PDF is not rendering correctly, you can download the PDF file here.
Bejger, A., Chybowski, L. and Gawdzińska, K. (2018) ‘Utilising elastic waves of acoustic emission to assess the condition of spray nozzles in a marine diesel engine’, Journal of Marine Engineering and Technology. doi: 10.1080/20464177.2018.1492361.
Bejger, A. and Drzewieniecki, J. B. (2019) ‘The Use of Acoustic Emission to Diagnosis of Fuel Injection Pumps of Marine Diesel Engines’, Energies, 12(24), p. 4661. doi: 10.3390/en12244661.
Bejger, A. and Drzewieniecki, J. B. (2020) ‘A New Method of Identifying the Limit Condition of Injection Pump Wear in Self-Ignition Engines’, Energies, 13(7), p. 1601. doi: 10.3390/en13071601.
Bejger, A. and Piasecki, T. (2020) ‘The Use of Acoustic Emission Elastic Waves for Diagnosing High Pressure Mud Pumps Used on Drilling Rigs’, Energies, 13(5), p. 1138. doi: 10.3390/en13051138.
Biočanin, S. and Biočanin, M. (2017) ‘Measurement crankshaft angular speed of an OM403 engine’, Serbian Journal of Electrical Engineering, 14(2), pp. 257-275. doi: 10.2298/SJEE1702257B.
Bonisławski, M. et al. (2019) ‘A Novel Telemetry System for Real Time, Ship Main Propulsion Power Measurement’, Sensors, 19(21), p. 4771. doi: 10.3390/s19214771.
Borkowski, T. Kowalak, P. Myśków, J. (2012) ‘Vessel main propulsion engine performance evaluation’, Journal of KONES, 19(2), pp. 53-60.
Bueno, A. V., Velásquez, J. A. and Milanez, L. F. (2009) ‘A new engine indicating measurement procedure for combustion heat release analysis’, Applied Thermal Engineering, 29(8-9), pp. 1657-1675. doi: 10.1016/j.applthermaleng.2008.07.023.
Caputo, D. C. et al. (2018) ‘Processing of internal combustion engine test data using the indicated cycle provided model’, Transportation Research Procedia, 33, pp. 20–27. doi: 10.1016/j.trpro.2018.10.071.
Chybowski, L. (2018) ‘Use of Triz SU-Field Models in the Process of Improving the Injector of an Internal Combustion Engine’, Multidisciplinary Aspects of Production Engineering, 1(1), pp. 257-268. doi: 10.2478/mape-2018-0033.
Chybowski, L. (2019) Diagnozowanie silników okrętowych z zapłonem samoczynnym w oparciu o analizę procesów wtrysku i spalania paliwa. Szczecin: Maritime University of Szczecin Press.
Chybowski, L. et al. (2020) ‘Evaluation of Model-Based Control of Reaction Forces at the Supports of Large-Size Crankshafts’, Sensors, 20(9), p. 2654. doi: 10.3390/s20092654.
Chybowski, L., Gawdzińska, K. and Laskowski, R. (2019) ‘Assessing the Unreliability of Systems during the Early Operation Period of a Ship - A Case Study’, Journal of Marine Science and Engineering, 7(7), pp. 213:1-12. doi: 10.3390/jmse7070213.
Chybowski, L., Gawdzińska, K. and Souchkov, V. (2018) ‘Applying the Anticipatory Failure Determination at a Very Early Stage of a System’S Development: Overview and Case Study’, Multidisciplinary Aspects of Production Engineering, 1(1), pp. 205–215. doi: 10.2478/mape-2018-0027.
Chybowski, L. and Kazienko, D. (2019) ‘The Development of an Explosion Protection System in the Starting Air Manifold of a High Power Engine’, System Safety: Human - Technical Facility - Environment, 1(1), pp. 26-34. doi: 10.2478/czoto-2019-0004.
Dereszewski, M. (2016) ‘Monitoring of torsional vibration of a crankshaft by instantaneous angular speed observations’, Journal of KONES Powertrain and Transport, 23(1), pp. 99-106.
Desbazeille, M. et al. (2010) ‘Model-based diagnosis of large diesel engines based on angular speed variations of the crankshaft’, Mechanical Systems and Signal Processing, 24(5), pp. 1529–1541. doi: 10.1016/j.ymssp.2009.12.004.
Dunaj, P., Dolata, M. and Berczyński, S. (2019) ‘Model Order Reduction Adapted to Steel Beams Filled with a Composite Material’, in Information Systems Architecture and Technology: Proceedings of 39th International Conference on Information Systems Architecture and Technology – ISAT 2018. Springer, Cham, pp. 3-13. doi: 10.1007/978-3-319-99996-8_1.
Dunaj, P., Marchelek, K. and Chodźko, M. (2019) ‘Application of the finite element method in the milling process stability diagnosis’, Journal of Theoretical and Applied Mechanics, 57(2), pp. 353–367. doi: 10.15632/jtam-pl/104589.
Kazienko, D. (2019) ‘The analysis of class survey methods and their impact on the reliability of marine power plants’, 55 Scientific Journals of the Maritime University of Szczecin, no. 55 / 2018, 55(2018-09–27), pp. 34-43. doi: 10.17402/299.
Kazienko, D. and Chybowski, L. (2020) ‘Instantaneous Rotational Speed Algorithm for Locating Malfunctions in Marine Diesel EnginesLocating Malfunctions in Marine Diesel Engines’, Energies, 13(6), pp. 1396:1-32. doi: 110.3390/en13061396.
Kluj, S. (2000) Diagnostyka urządzeń okrętowych.
Korczewski, Z. (2015) ‘Exhaust gas temperature measurements in diagnostics of turbocharged marine internal combustion engines. Part I. Standard measurements’, Polish Maritime Research, 1(85), pp. 47-54. doi: 10.1515/pomr-2015-0007.
Krystosik-Gromadzińska, A. (2019) ‘Affordable hybrid thermography for merchant vessel engine room fire safety’, Scientific Journals of the Maritime University of Szczecin, Zeszyty Naukowe Akademii Morskiej w Szczecinie, 57(129), pp. 21-26. doi: 10.17402/322.
Li, Z. et al. (2012) ‘Intelligent fault diagnosis method for marine diesel engines using instantaneous angular speed’, Journal of Mechanical Science and Technology, 26(8), pp. 2413–2423. doi: 10.1007/s12206-012-0621-2.
Margaronis, I. E. (1992) ‘The torsional vibrations of marine Diesel engines under fault operation of its cylinders’, Forschung im Ingenieurwesen, 58(1-2), pp. 13-25. doi: 10.1007/BF02561188.
Nozdrzykowski, K. (2005) ‘Comparative assessment of crankshaft strain measurement methods’, in Proc. of 5th International Conference Measurement 2005. Smolenice, Slovakia, pp. 425-428.
Nozdrzykowski, K. (2016) ‘Force analysis and simulation - experimental research on the measurement of cylindrical surface’, Zeszyty Naukowe Akademii Morskiej w Szczecinie, Scientific Journals of the Maritime University of Szczecin, 48(120), pp. 37-42.
Nozdrzykowski, K. and Bejger, A. (2013) ‘Aspects of using correlation calculus in comparative measurements of geometric deviations and shape profiles of main crankshaft bearing journals’, Zeszyty Naukowe Akademii Morskiej w Szczecinie, Scientific Journals of the Maritime University of Szczecin2, 35(107), pp. 114-117.
Nozdrzykowski, K., Chybowski, L. and Dorobczyński, L. (2020) ‘Model-Based Estimation of the Reaction Forces in an Elastic System Supporting Large-Size Crankshafts During Measurements of their Geometric Quantities’, Measurement, 155, p. 107543. doi: j.measurement.2020.107543.
Piasecki, T. et al. (2017) ‘Preparation of the Cargo System for LNG Discharge from a Membrane Steam Turbine LNG Vessel at an Offshore LNG Terminal’, Rynek Energii, 2(129), pp. 95-99.
Quan, W., Wei, J., Zhao, YW., Sun, LH., Bianl, X. (2011) ‘Development of an Automatic Optical Measurement System for Engine Crankshaft.’, in International Conference on Computational Science and Applications, pp. 68-75.
Taglialatela, F. et al. (2013) ‘Determination of combustion parameters using engine crankshaft speed’, Mechanical Systems and Signal Processing, 38(2), pp. 628-633. doi: 10.1016/j.ymssp.2012.12.009.
Ulewicz, R. et al. (2019) ‘The investigation of the fatigue failure of passenger carriage draw-hook’, Engineering Failure Analysis, 104, pp. 609-616. doi: 10.1016/j.engfailanal.2019.06.036.
Ulewicz, R. and Mazur, M. (2013) ‘Fatigue Testing Structural Steel as a Factor of Safety of Technical Facilities Maintenance’, Production Engineering Archives, 1/1, pp. 32–34. doi: 10.30657/pea.2013.01.10.
VEB SKL (1960) Buckau-Wolf R8VD-136 Engine Passport. No. 28878. Magdeburg.
Wang, T. et al. (2019) ‘Instantaneous Rotational Speed Measurement Using Image Correlation and Periodicity Determination Algorithms’, IEEE Transactions on Instrumentation and Measurement, pp. 1-1. doi: 10.1109/TIM.2019.2932154.
Yang, J. et al. (2001) ‘Fault Detection in a Diesel Engine by Analysing the Instantaneous Angular Speed’, Mechanical Systems and Signal Processing, 15(3), pp. 549–564. doi: 10.1006/mssp.2000.1344.