The article presents the problem of quality management in the process of material selection for structural elements of a car dump truck. The study took into account the classical management pyramid and there was used the optimization method (generalized objective function). The center that manages the process of production / assembly of the dump truck should be the level of organization that has the highest degree of processing of required information and making strategic decisions in this respect. The design process of structural elements is carried out primarily in terms of the ability to provide adequate physical and mechanical properties in the process. There is a very strong tendency to reduce the own weight of the semi-trailers by increasing the weight of the load. This is an important criterion from the point of view of the economics of operation of technical facilities of this type. The article presents the results of the application of a generalized objective function in the field of material selection for construction elements of a dump truck. The analysis includes structural elements made of S355 steel and Hardox 400 and 450 fine-grain steel.
If the inline PDF is not rendering correctly, you can download the PDF file here.
Bober, P. (2017). Measurement of Objective Function for BLDC Motor Optimization. Acta Electrotechnica et Informatica, 17(4), pp.43-49. [online] Available at: http://dx.doi.org/10.15546/aeei-2017-0033. [Accessed 11 Feb. 2018].
Ingaldi, M. and Dziuba, S.T. (2016). Supervisor's Assessment as an Element Effecting Technological Process in Chosen Metallurgical Company. In: 25th Anniversary International Conference on Metallurgy and Materials, Ostrava, Tanger, pp. 1822-1828
Leal, U.A.S., Silva, G.N. and Lodwick, W.A. (2015). Multi-objective optimization in optimal control problem with interval-valued objective function. [online] Available at: http://dx.doi.org/10.5540/03.2015.003.01.0130. [Accessed 11 Feb. 2018].
Pacana, A., Liberko, I. and Balwander, A.(2012). Improvement of work quality on the basis of the 5S rules. In: Conference on Management 2012 - Research in Management and Business in the Light of Practical Needs. pp. 280-282
Salek, R and Klimecka-Tatar, D. (2016). Management and controlling of stocks in the supply chain of metallurgical industry. In: 25th Anniversary International Conference on Metallurgy and Materials. pp. 1993-2000
Skotnicka-Zasadzien, B., Wolniak, R. and Zasadzien, M. (2017). Use of quality engineering tools and methods for the analysis of production processes - case study. Proceedings of the Second International Conference On Economic and Business Management (FEBM 2017). [online] Available at: http://dx.doi.org/10.2991/febm-17.2017.31.[Accessed 11 Feb. 2018].
Mazur, M. and Mikova, K. (2016). Impact resistance of high strength steels. Materials Today-Proceedings (3)4. pp. 1060-1063. Available at: http://dx.doi.org/10.1016/j.matpr.2016.03.048 [Accessed 11 Feb. 2018].
Schaeffler, DJ. (2017). The Importance of Lubrication in Sheet Metal Selection for Automotive Body Construction The Drive to Lightweight Materials. Tribology & Lubrication Technology (73)11. pp.48-50.
Ulewicz, R. and Mazur, M. (2013). Fatigue testing structural steel as a factor of safety of technical facilities maintenance. Production Engineering Archives, 1/1, pp.32-34. [online] Available at: http://dx.doi.org/10.30657/pea.2013.01.10. [Accessed 11 Apr. 2018].
Ulewicz, R., Selejdak, J., Borkowski, S. and Jagusiak-Kocik, M. (2013). Process management in the cast iron foundry. In: 22ND International Conference on Metallurgy and Materials. pp. 1926-1931
Zhuravskaya, M. et al. (2016). TOYOTA-oriented technologies as ecological management tools for transport enterprises. Polish Journal of Management Studies, 13(2), pp.192-203. [online] Available at: http://dx.doi.org/10.17512/pjms.2016.13.2.19. [Accessed 11 Feb. 2018].
Ulewicz, R. et. al. (2014). Fatigue properties of wear resistant martensitic steel. In: 23RD International Conference on Metallurgy and Materials, pp. 784-789.