Analysis of Weldings’ Incompatibility in Constructions

Open access

Abstract

The paper presents an analysis of the causes and consequences of nonconformity that has been made in the welding of structural elements. The most frequent incompatibilities in this process were identified and RPN determined for them. The implementation of corrective and preventive actions in the identified critical areas was suggested based on the conducted analysis. After the implementation of corrective actions the re-calculation of the value of the RPN has been made. The paper presents the importance of visual inspection in the process of supervising finished products from the construction welding process. Elements of selected processes carried out in welded structures over two months were analyzed.

If the inline PDF is not rendering correctly, you can download the PDF file here.

  • Bozdag E. Asan U. Soyer A. et al. (2015). Risk prioritization in Failure Mode and Effects Analysis using interval type-2 fuzzy sets. EXPERT SYSTEMS WITH APPLICATIONS Volume: 42(8) pp. 4000-4015.

  • Brodny J. Stecuła K. and Tutak M. ( 2016). Application of the TPM strategy to analyze the effectiveness of using a set of mining machines. SGEM 2016 Conference Proceedings Book1 Vol. 2 pp. 65-72.

  • Czuchryj J. and Stachurski M. (2005). Badania nieniszczące w spawalnictwie. Gliwice: Instytut Spawalnictwa.

  • Dudek A. and Lisiecka B. (2016). The Effect Of Alloying Method On The Microstructure And Properties Of The Pm Stainless Steel. In: Metal 2016: 25th Anniversary International Conference On Metallurgy And Materials pp. 1045-1050.

  • Ferenc K. and Ferenc J. (2009). Konstrukcje spawane. Połączenia. Warszawa: Wydawnictwa Naukowo-Techniczne.

  • Kardas E. (2015). The analysis of non-conformances of metal impeller using selected quality instruments. In: METAL 2015: 24th International Conference on Metallurgy And Materials pp. 1970-1975.

  • Lipiński T. and Wach A. (2014). Influence Of Outside Furnace Treatment On Purity Medium Carbon Steel. In: Metal 2014: 23rd International Conference On Metallurgy And Materials pp. 738-743

  • Nowakowska-Grunt J. and Mazur M. (2016). Effectiveness Of Logistics Processes Of Smes In The Metal Industry. In: Metal 2016: 25th Anniversary International Conference On Metallurgy And Materials pp. 1956-1961

  • Pacana A. and Ulewicz R. (2017). Research of determinants motiving to implement the environmental management system. Polish Journal of Management Studies. Volume: 16(1) pp. 165-174 .

  • Pałubicki S. and Kukiełka K. (2017). Zarządzanie jakością w wybranym procesie produkcyjnym z zastosowaniem metody FMEA. AUTOBUSY 7-8/2017 pp. 256-261

  • PN-EN 13018 Standard. Badania nieniszczące. Badania wizualne. Zasady ogólne. Warszawa 2004.

  • PN-EN ISO 6520-1:2009 Standard. Spawanie i procesy pokrewne. Klasyfikacja geometrycznych niezgodności spawalniczych w metalach. Część 1: Spawanie. Polski Komitet Normalizacyjny Warszawa 2009.

  • Ptak W. and Tabor A. (2008). Methods for assessing the quality of metal products. Welding production engineering. (in Polish). Krakow: Krakow University of Technology Publishing House.

  • Szataniak P. Novy F. and Ulewicz R. (2014) HSLA Steels - Comparison Of Cutting Techniques. In: Metal 2014: 23rd International Conference On Metallurgy And Materials pp. 778-783

  • Tubis A. (2018). Process Assessment of Risks in the Production Company with the Use of Linguistic Variables and the FMEA Analysis. Advances in Intelligent Systems and Computing. Volume: 637 pp. 368-379.

  • Ulewicz R. (2016). Quality management system operation in the woodworking industry [in:] Conference: International Conference on the Path Forward for Wood Products: A Global Perspective Location: Baton Rouge LA path forward for wood products: a global perspective proceedings of scientific papers 2016 pp. 51-56.

  • Wolniak R. and Skotnicka B. (2010). Metody i narzędzia zarządzania jakością: teoria i praktyka. Gliwice: Wydawnictwo Politechniki Śląskiej 2010.

  • Zasadzien M. and Zarnovsky J. (2018). Improvement of selected logistics processes using quality engineering tools. MANAGEMENT SYSTEMS IN PRODUCTION ENGINEERING Volume 26(1) pp. 55-59.

Search
Journal information
Metrics
All Time Past Year Past 30 Days
Abstract Views 0 0 0
Full Text Views 87 57 1
PDF Downloads 84 62 4