Inductor Machines with Longitudinally-Transversal Comb-Wise Tooth Zone

A. Serebryakov 1 , N. Levin 2 , E. Kamolins 1  and M. Mileiko 1
  • 1 Riga Technical University, Faculty of Power and Electrical Engineering, 12/1 Azenes Str., Riga, LV-1048, Latvia
  • 2 Institute of Physical Energetics, 11 Krivu Str., LV-1006, Riga, Latvia

Abstract

The method considered in the present paper concerns the operational efficiency of the inductor electric machine, which can be improved by placing on the stator and rotor teeth the combs combined from differently shaped teeth and slots. The use on the inductor electric machine stator and rotor teeth of combs as a combination of differently shaped hills (teeth) and valleys (slots) allows raising the specific power of the machine. This effect is determined by the chosen type of a comb element as well as by technological possibilities of the manufacturer. The proposed method could be used moderately in the inductor machines with longitudinally-transversal combing.

If the inline PDF is not rendering correctly, you can download the PDF file here.

  • 1. Levin, N. N., & Serebryakov, A.D. (1976). Electric machines and drives. In Proceedings of RVVKKU (Vol. 3). Riga (in Russian).

  • 2. Santalov, A. M., & Serebryakov, A.D. (1976). On the optimal geometry of the tooth zone of inductor machines. In Proceedings of RKIIGA (Vol. 113, pp. 12–23). Riga (in Russian).

  • 3. Serebryakov, A. D. (1982). Optimal tooth zone of the inductor motor. Contactless electric machines (Vol. 21, pp. 157–162). Riga: Zinatne (in Russian).

  • 4. Alper, N. J. (1962). Calculation of magnetic fields in the air gap of the inductor machine with constant flow. In Bulletin of Electronic Industry, Vol. 3. Moscow (in Russian).

  • 5. Bul, B. K. (1964). Foundations of Theory and Calculation of the Magnetic Fields. Moscow: Energy (in Russian).

  • 6. Koc, B. E. (1964). Determination of air gap permeances in comb-wise magnetic systems. Elecrotechnics, 9. Moscow (in Russian).

OPEN ACCESS

Journal + Issues

Search