Ni–Al Protective Coating of Steel Electrodes in Dc Electrolysis for Hydrogen Production / Ni–Al Pārklājuma Ietekme Uz Tērauda Elektrodiem Līdzstrāvas Elektrolīzē Ūdeņraža Ražošanai

P. Aizpurietis 1 , M. Vanags 1 , J. Kleperis 1 , and G. Bajars 1
  • 1 Institute of Solid State Physics, University of Latvia, 8 Kengaraga Str., LV-1063, Riga, LATVIA

Hydrogen can be a good alternative to fossil fuels under the conditions of world's crisis as an effective energy carrier derived from renewable resources. Among all the known methods of hydrogen production, water electrolysis gives the ecologically purest hydrogen, so it is of importance to maximize the efficiency of this process. The authors consider the influence of plasma sprayed Ni-Al protective coating of 316L steel anode-cathode electrodes in DC electrolysis. In a long-term (24 h) process the anode corrodes strongly, losing Cr and Ni ions which are transferred to the electrolyte, while only minor corrosion of the cathode occurs. At the same time, the composition of anode and cathode electrodes protected by Ni-Al coating changes only slightly during a prolonged electrolysis. As the voltammetry and Tafel plots evidence, the Ni-Al coating protects both the anode and cathode from the corrosion and reduces the potential of hydrogen evolution. The results obtained show that such a coating works best in the case of steel electrodes.

If the inline PDF is not rendering correctly, you can download the PDF file here.

  • 1. Hoffmann, P. (2012). Tomorrow's Energy: Hydrogen, Fuel Cells, and the Prospectsfor a Cleaner Planet. MIT Press, p. 367.

  • 2. Engelhardt, V. (2010). The Electrolysis of Water: Processes and Applications. Nabu Press, p. 162

  • 3. Brown, A.P., Krumpelt, M., Loutfy, R.O., & Yao, N.P. (1982). The effect of surface roughness on the hydrogen evolution reaction kinetics with mild steel and nickel cathodes. Electrochimica Acta, 27, 557-560

  • 4. Behzadian, B., Piron, D.L., Fan, C., & Lessard, J. (1991). Electrocatalytic effect on hydrogen evolution from copper materials plated from a chloride-containing bath. Int. J. Hydrogen Energy, 16, 791-796

  • 5. Dolgikh, O.V., Kravtsova, Yu.G., & Sotskaya, N.V. (2010). The effect of composition of electrodeposited Ni-P alloys on the hydrogen evolution rate. Russian J. Electrochem. 46, 918-924

  • 6. Schiller, G., & Borck, V. (1992). Vacuum plasma sprayed electrodes for advanced alkaline water electrolysis. Int. J. Hydrogen Energy, 17, 261-273

  • 7. Starosta, R. (2009). Properties of thermal spraying Ni-Al alloy coatings. Adv. Mat. Sci.9, 30-40

  • 8. Vanags, M., Kleperis, J., Bajars, G., & Lusis, A. (2007). Water electrolysis using electrodes with modified surface/volume. J Phys.: Conf., Ser. 93012025 doi: 10.1088/1742-6596/93/1/012025.

  • 9. Renovation of metal spare parts with plasma jet coatings. Terpa-Serviss Ltd. http://www.terpa.lv/index.htm

  • 10. Nikiforov, A., Christensen, E., Petrushina, I., Jensen, J.O., & Bjerrum, N.J. (2012). Advanced Construction Materials for High Temperature Steam PEM Electrolysers. In:“Electrolysis”, Ch. 4 (ed-s: J. Kleperis, V. Linkov). IntechOpen, 61-86, http://dx.doi.org/10.5772/51928

  • 11. A Review of Techniques for Electrochemical Analysis. Application Note E-4, Princeton Applied Research. Available from: http://www.princentonaappliedresearch.com/Literature/index.aspx

  • 12. Krishtalik, L.I. (1986). Charge Transfer Reactions in Electrochemical and ChemicalProcesses (1st ed-n). New York: Consultants Bureau, (Ed. U.S.A), 26-67.

OPEN ACCESS

Journal + Issues

Search