Results of simulation of main rotor blade loads and deformations, which can be generated during boundary states of helicopter flight, are presented. Concerned cases of flight envelope include hover at maximum height, level flight at high velocity, pull-up manoeuvres applying cyclic pitch and mixed collective and cyclic control. The simulation calculations were executed for data of light helicopter with three-bladed articulated rotor. For analysis, the real blades are treated as elastic axes with distributed masses of blade segments. The model of deformable blade allows for out-of-plane bending, in plane bending, and torsion. For assumed flight state of helicopter, the equations of rotor blades motion are solved applying Runge-Kutta method. According to Galerkin method, for each concerned azimuthal position of blade the parameters of its motions are assumed as a combination of considered bending and torsion eigen modes of the blade. The loads of rotor blades generated during flight depend due to velocity of flight, helicopter mass, position of rotor axis in air and deflections of swashplate that correspond to collective and cyclic pitch angle applied to rotor blades. The results of simulations presenting rotor loads and blade deformations are shown in form of time-runs and as plots of rotor-disk distributions. The simulations of helicopter flight states may be useful for prediction the conditions of flight-tests without exceeding safety boundaries or may help to define limitations for manoeuvre and control of helicopter.
If the inline PDF is not rendering correctly, you can download the PDF file here.
 Bain J. Sim B. W. Sankar L. Brentner K. Aeromechanics and Aeroacoustics Predictions of the Boeing-SMART Rotor Using Coupled-CFD/CSD Analysis AHS 66th Annual Forum Phonix Arizona 2010.
 Bousman W. G. Putting the Aero Back Into Aeroelasticity NASA/TM-2000-209589 Ames Research Center Moffett Field California 2000.
 Bousman W. G. Kufeld R. M. UH-60A Airloads Catalog NASA/TM-2005-212827 2005.
 Bousman W. G. Rotorcraft Airloads Measurements-Extraordinary Costs Extraordinary Benefits NASA/TP-2014-218374 Ames Research Center Moffett Field California 2014.
 Gula P. Gorecki T. Design Experiments and Development of a Polish Unmanned Helicopter ILX-27 39st European Rotorcraft Forum Moscow 2013.
 Johnson W. Milestones in Rotorcraft Aeromechanics NASA/TP-2011-215971 Ames Research Center Moffett Field California 2011.
 Johnson W. A History of Rotorcraft Comprehensive Analyses AHS 69th Annual Forum Phonix Arizona 2013.
 Stalewski W. Aerodynamic designing and optimalization of Rotorcrafts (in Polish: Projektowanie i optymalizacja aerodynamiczna wiropłatów) Biblioteka naukowa nr 52 Wydawnictwo Naukowe Instytutu Lotnictwa Warszawa 2017.
 Wang L. Diskin B. Biedron R. T. Neilsen E. J. Sonneville V. Bauchau O. A. High-Fidelity Multidisciplinary Design Optimization Methodology with Application to Rotor Blades Aeromechanics Design for Transformative Vertical Flight San Francisco California 2018
 Yeo H. Romander E. A. Norman T. R. Investigatioin of Rotor Performance and Loads of a UH-60A Individual Blade Control System Journal of the American Helicopter Society Vol. 56 2011.