Modelling of Vane and Rotor Blade Rows in Simulations of Gas Turbine Performance

Open access


A method of modelling of nozzle and rotor blade rows of gas turbine dedicated to simulations of gas turbine performance is proposed. The method is applicable especially in early design stage when many of geometric parameters are yet subject to change. The method is based on analytical formulas derived from considerations of flow theory and from cascade experiments. It involves determination of parameters of gas flow on the mean radius of blade rows. The blade row gas exit angle, determined in turbine design point is a basis for determination of details of blade contour behind the throat position. Throat area is then fixed based on required maximum mass flow in critical conditions. Blade leading edge radius is determined based on flow inlet angle to the blade row in the design point. The accuracy of analytical formulas applied for definition of blade contour details for assumed gas exit angle was verified by comparing the results of analytical formulas with CFD simulations for an airfoil cascade. Losses of enthalpy due to non-isentropic gas flow are evaluated using the analytical model of Craig and Cox, based on cascade experiments. Effects of blade cooling flows on losses of total pressure of the gas are determined based on analytical formulas applicable to film cooling with cooling streams blowing from discrete point along blade surface, including leading and trailing edges. The losses of total pressure due to film cooling of blades are incorporated into the Craig and Cox model as additional factor modifying gas flow velocities.

If the inline PDF is not rendering correctly, you can download the PDF file here.

  • [1] Mattingly J. D. Elements of Gas Turbine Propulsion (AIAA Education Series) AIAA (American Institute of Aeronautics & Astronautics) 2005.

  • [2] Bugała P. Deviation Angle Models In Off-Design High-Pressure Turbines Journal of KONES Powertrain and Transport Vol. 25 No. 2 pp 69-74 2018 ISSN: 1231-4005 e-ISSN: 2354-0133 DOI: 10.5604/01.3001.0012.2778 2018.

  • [3] Craig H. R. M. Cox H. J. A. Performance Estimation of Axial Flow Turbines Proceedings of the Institution of Mechanical Engineers Vol. 185 32/71 1970/71.

  • [4] Aronov B. M. Zhukovskii M. I. Zhuravlev B. A. Profilirovanie lopatok aviatsionnih gazovih turbin Moskva Mashinostroienie 1975.

  • [5] Dżygadło Z. Łyżwiński M. Otyś J. Szczeciński S. Zespoły wirnikowe silników turbinowych Warszawa Wydawnictwo Komunikacji i Łączności 1982.

  • [6] Hylton L. Mihelc M. S.. Turner E. R. Nealy D. A. York R. E. Analytical and Experimental Evaluation of the Heat Transfer Distribution Over the Surfaces of Turbine Vanes Detroit Diesel Allison Division of General Motors Company Final Report prepared for NASA Lewis Research Center Contract NAS 3-22761 May 1983.

  • [7] Mattingly J. D. Heiser W. H. Pratt D. T. Aircraft Engine Design Second Edition AIAA Education Series 2002.

  • [8] Hartsel J. E. Prediction of Effects of Mass Transfer Cooling on the Blade Row Efficiency of Turbine Airfoils AIAA Paper 72-11 Jan. 1972.

  • [9] Lytle J. K. The Numerical Propulsion System Simulation: A Multidisciplinary Design System For Aerospace Vehicles. NASA/TM—1999-209914 Glenn Research Center Ohio 1999.

Journal information
All Time Past Year Past 30 Days
Abstract Views 0 0 0
Full Text Views 12 12 1
PDF Downloads 11 11 2