Inductive sensors for blade tip-timing in gas turbines

Open access

Abstract

The paper reviews features and applications of the upgraded inductive sensor for BTT, which is able to operate in contact with exhaust gases of temperature even as high as 1200 K. The new design includes metal-ceramic housing ensuring proper heat transfer, magnetic circuit containing set of permanent magnets with various magnetic field values and Curie temperatures, completely redesigned windings and current/voltage converter used instead of an electromotive force amplifier. Its principle of operation is based on electro-dynamical interaction and therefore it may be referred as a passive eddy-current sensor. The sensor technique has been demonstrated on four stages of a surplus military turbofan including the high pressure turbine as part of the engine health monitoring system. We present signal samples and review methods used for online processing of time-of-arrival signals when only a limited number of sensors is available.

If the inline PDF is not rendering correctly, you can download the PDF file here.

  • [1] http://www.piwg.org/sensor/sensor_btdeflection.html

  • [2] A European Lab Gap Matrix. European Virtual Institute for Gas Turbine Instrumentation

  • [3] J. S. Wilson. “Sensor Technology Handbook” Newnes ISBN-13: 978-0750677295 (2004).

  • [4] E. Rokicki R. Przysowa J. Spychała R. Szczepanik M. Perz. “Electronic system of current inductive sensor especially for measurement of flow blades vibrations of rotor machines” Polish patent PAT.209634 (2007).

  • [5] R. Szczepanik R. Przysowa J. Spychała E. Rokicki K Kaźmierczak. P. Majewski “Application of Blade-tip Sensors to Blade-Vibration Monitoring in Gas Turbines” in: Thermal Power Plants. ISBN 978-953-307-952-3. InTech - Open Access Publisher. Rijeka. Croatia (2011)

  • [6] E. Rokicki J. Spychala R. Szczepanik P. Majewski. “Measuring vibrations of a turbo-machine rotor blade with the help of an induction sensor in high temperature”. US 8125215 B2 (2009).

  • [7] R. Przysowa J. Spychała Health Monitoring of Turbomachinery Based on Blade Tip-Timing and Tip-Clearance RTO-MP-AVT-157-14 2008

  • [8] K. Chana Engine Experience of Non-optical Tip Timing Sensors in: Tip timing and tip clearance problems in turbomachinery Lecture Series von Karman Institute for Fluid Dynamics VKI-LS-2007.

  • [9] R. Przysowa Analysis of synchronous blade vibration with the use of linear sine fitting Journal of KONBiN 2(30) pp. 5-20 De Gruyter Open (2014).

  • [10] R. Tomassini JF Brouckaert G. Rossi Contactless magnetoresistive sensor for tip timing and tip clearance measurement systems STO-MP-AVT-229-14 (2015).

  • [11] M. Witos R. Szczepanik “Turbine Engine Health/Maintenance Status Monitoring with Use of Phase-Discrete Method of Blade Vibration Monitoring” RTO-MP-AVT-121-02 (2005).

  • [12] R. Przysowa J. Spychała “Health Monitoring of Turbomachinery Based on Blade Tip-Timing and Tip-Clearance”. RTO-MP-AVT-157-P14. Montreal (2008).

  • [13] RJ Morris JW Littles B. Hall WD Owen S. Tulpule R. Szczepanik R. Przysowa “Crack Detection and Prognosis Using Non-Contact Time of Arrival Sensors for Fan and Compressor Airfoils In Gas Turbine Engines” AeroMat (2009).

  • [14] K. Chana D. Cardwell L. Gray B. Hall “Disk Crack Detection And Prognosis Using Non-Contact Time Of Arrival Sensors”. GT2011-45158.

  • [15] R. Przysowa E. Rokicki P. Majewski Optimized magnetic sensors to measure speed and position in adverse environments. IET & ISA 60th International Instrumentation Symposium (2014). DOI: 10.1049/cp.2014.0552

  • [16] R. Przysowa E. Rokicki P. Majewski Health monitoring of industrial fan blades. 6th EVI-GTI International Gas Turbine Instrumentation Conference Baden CH; 11/(2013).

  • [17] M. Witoś High sensitive methods for health monitoring of compressor blades and fatigue detection. TheScientificWorldJournal 2012 2013: 218460-218460

  • [18] P. Russhard Derived Once per Rev Signal generation for Blade Tip Timing Systems. IET & ISA 60th International Instrumentation Symposium paper 5.1 (2014).

  • [19] T. Nicholas. High cycle fatigue: a mechanics of materials perspective. Elsevier (2006).

  • [20] M. Zielinski G. Ziller Noncontact Blade Vibration Measurement System for Aero Engine Application. 17th International Symposium on Airbreathing Engines Munich ISABE-2005-1220.

  • [21] B. Hayes (chair) ANSI/ISA-107.1-2013 Industry Standard File Format for Revolution-Based Tip Timing Data www.isa.org

  • [22] O. Jousselin P. Russhard A method for establishing the uncertainty levels for aero-engine blade tip amplitudes extracted from blade tip timing data 10th International Conference on Vibrations in Rotating Machinery - IMECHE London (2012).

  • [23] P. Russhard BTT Data Zeroing Techniques MFPT and ISA’s 59th International Instrumentation Symposium (2013).

Search
Journal information
Impact Factor


CiteScore 2018: 0.33

SCImago Journal Rank (SJR) 2018: 0.21
Source Normalized Impact per Paper (SNIP) 2018: 0.434

Cited By
Metrics
All Time Past Year Past 30 Days
Abstract Views 0 0 0
Full Text Views 401 259 8
PDF Downloads 314 245 9