Vibration Reduction System Using Magnetic Suspension Technology

Open access

Abstract

The article presents considerations concerning the construction of vibration reduction system using magnetic suspension technology. Presents the results of simulation, numerical and experimental the bearingless electric motor, for which successfully used this type of solution. Positive results of research and testing have become the basis for the development of the concept of building this type of active vibration reduction system , at the same time acting as a support for a technical object, which is a jet engine. Bearing failures are manifested by loss or distortion of their mass, which leads to a total destruction of the roller bearing, and thus reflected in the security. The article presents the concept of building active magnetic suspension to eliminate the bearing system of classical rolling bearing and replace it with magnetic bearing.

[1] Chiba A., Fukao T., Ichikawa O., Oshima M., Takemoto M., Dorrel D.: Magnetic Bearings and Bearingless Drives, Elsevier's Science Technology Rights Department in Oxford, UK, 2005;

[2] Żokowski M.: Projektowanie i badanie samołożyskującego się wirnika silnika elektrycznego, Rozprawa doktorska napisana pod kierunkiem prof. dr. hab. inż. Z Gosiewskiego, Warszawa, 2011;

[3] Opracowanie zespołu Zakładu Silników Lotniczych ITWL zrealizowane pod kierownictwem dr. inż. J. Spychały: Demonstrator systemu diagnozowania systemu zespołu wirnikowego silnika odrzutowego, Warszawa, 2011.

Journal of KONBiN

The Journal of Air Force Institute of Technology

Journal Information


CiteScore 2017: 0.21

SCImago Journal Rank (SJR) 2017: 0.163
Source Normalized Impact per Paper (SNIP) 2017: 0.320

Metrics

All Time Past Year Past 30 Days
Abstract Views 0 0 0
Full Text Views 72 72 13
PDF Downloads 24 24 6