Test Cover Image of:  Journal of Electrical Engineering
Impact Factor

Journal of Electrical Engineering

The Journal of Slovak University of Technology

The joint publication of the Slovak University of Technology, Faculty of Electrical Engineering and Information Technology, and of the Slovak Academy of Sciences, Institute of Electrical Engineering, is a wide-scope journal published bimonthly and comprising.

  • Automation and Control
  • Computer Engineering
  • Electronics and Microelectronics
  • Electro-physics and Electromagnetism
  • Material Science
  • Measurement and Metrology
  • Power Engineering and Energy Conversion
  • Signal Processing and Telecommunications

Why subscribe and read

The Journal of Electrical Engineering aims to publish scientific articles from all branches of electrical engineering, and automation control and from computer science and engineering as long as these are related to electrical topics. The language of the journal is English.

Why submit

Besides the full PAPERS and short COMMUNICATIONS, the Journal will consider for publication in section REVIEWS — LETTERS — REPORTS also review articles, tutorials, literature reviews and correspondence concerning items published in previous issues. The Journal is indexed in Thomson-Reuter SCIE, SCOPUS (Elsevier) and INSPEC (IET)

Similarity Check Plagiarism Screening System

The editorial board is participating in a growing community of Similarity Check System's users in order to ensure that the content published is original and trustworthy. Similarity Check is a medium that allows for comprehensive manuscripts screening, aimed to eliminate plagiarism and provide a high standard and quality peer-review process.

Detailed description of the Similarity Check System can be found at:

Journal Metrics

5-year Impact Factor
Cite Score
Impact Factor
SCImago Journal Rank
Source Normalized Impact per Paper

Abstracting & Indexing

Journal of Electrical Engineering is covered by the following services:

  • Astrophysics Data System (ADS)
  • Baidu Scholar
  • CNKI Scholar (China National Knowledge Infrastructure)
  • CNPIEC - cnpLINKer
  • Dimensions
  • EBSCO (relevant databases)
  • EBSCO Discovery Service
  • Engineering Village
  • Genamics JournalSeek
  • Google Scholar
  • Inspec
  • Japan Science and Technology Agency (JST)
  • J-Gate
  • Journal Citation Reports/Science Edition
  • JournalGuide
  • JournalTOCs
  • KESLI-NDSL (Korean National Discovery for Science Leaders)
  • MyScienceWork
  • Naver Academic
  • Naviga (Softweco)
  • Primo Central (ExLibris)
  • ProQuest (relevant databases)
  • Publons
  • QOAM (Quality Open Access Market)
  • ReadCube
  • Reaxys
  • SCImago (SJR)
  • Semantic Scholar
  • Sherpa/RoMEO
  • Summon (ProQuest)
  • TDNet
  • TEMA Technik und Management
  • Ulrich's Periodicals Directory/ulrichsweb
  • WanFang Data
  • Web of Science - Science Citation Index Expanded
  • WorldCat (OCLC)

Supplementary Materials


The Journal of Electrical Engineering, joint publication of the Faculty of Electrical Engineering and Information Technology of the Slovak Technical University, and of the Institute of Electrical Engineering of the Slovak Academy of Sciences, is a wide-scope journal comprising:

  • Power Engineering and Energy Conversion
  • Electronics and Microelectronics
  • Electro-physics and Electromagnetism
  • Signal Processing and Telecommunications
  • Automation and Control
  • Measurement and Metrology
  • Computer Engineering

The Journal of Electrical Engineering aims to publish scientific articles full PAPERS and short COMMUNICA­TIONS from all branches of electrical engineering, and from automation control and computer science and en­gineering as long as these are relating to electrical top­ics. The Journal will consider for publication in section REVIEWS — LETTERS — REPORTS also review arti­cles, tutorials, literature reviews, correspondence concern­ing views and information published in previous issues, and topical information on forthcoming scientific events such as meeting and conferences. The language of the jour­nal is English.

The title of article should be brief and the full au­thors name and surname should be indicated together with the affiliation and address. Respective addresses of co-authors must be clearly cross-referenced. The body of the manuscript should be preceded by an abstract limited to about 8 lines, followed by up to 6 keywords. The con­tributions should be reasonably subdivided into sections and, if necessary, to subsections. For scientific PAPERS the following scheme is recommended.

1. INTRODUCTION — the topic of the article should be defined clearly and short review of published relevant solutions and comparison with the authors’ results should be given.

2. THEORETICAL PART — the author presents his considerations and ideas, mathematical formulae and their derivation. All information taken from other authors or critical comments on other works should be accompanied by exact references.

3. EXPERIMENTAL PART — includes the data on the measuring method and instruments as well as exper­imental results. In purely theoretical works this part is omitted.

4. DISCUSSION — presents a critical analysis, inter­pretation and evaluation of the obtained results.

5. CONCLUSION — the results should be summarized briefly and author’s scientific contribution should be indi­cated.

6. REFERENCES — must be fully and accurately doc­umented and conform with standard accepted in other journals. References should be quoted in the text in square brackets and listed at the end of the paper in that order they have appeared in the text.

7. AUTHOR(S) BIOGRAPHY — 10 to 15 lines about the author(s). The recommended content is: (titles, in parentheses) the year and place of birth, type of education and scientific degrees attained (field and year), former and present affiliations and professional (research) interests and activities.

The aim of publishing short scientific COMMUNICA­TIONS is to ensure the priority, through publishing, even though this might be at a cost of completeness in treating and discussing the topic. The short communication need not to have all sections recommended for original scien­tific articles PAPERS. At the end, again author’s original contribution should be stated explicitly.

No hard copies of the manuscript are required, however it is welcomed if manuscripts 80 types on the line and 35 lines a page in a single-column format are submitted. This corresponds to Times 11pt font, and approximately one such a page (plane text, without figures) would fit to one Journal page.

Figures and illustrations are required to be PC pro­cessed. It is appreciated if they are also embedded into the text for the reviewers’ convenience, otherwise the figure captions should be given in the text near the positions where the figures are to appear. Besides this text-file, figures and illustrations should be delivered also sepa­rately (all in one) fig-file. Please send the matters exclusively by E-mail.

Concerning the graphs, we prefer vector formats (cdr, emf, wmf, cgm, eps) bitmap formats as: pcx, bmp, tif, jpg, or any other should be avoided except in case of submitting photographs or alike pictures. Please, real­ize that sending a bitmap picture as an *.eps file would not do! Further, consider that the figures can be of one-column width usually less than 8 cm, or exception­ally, of two-column width not exceeding 16 cm. For the lettering, use the Times New Roman font.

Typed tables are not regarded as figures. They have to be numbered separately (Tab.1, Tab.2, etc) with all necessary text or comments placed above them.

After the evaluation by two independent peer reviewers and eventual changes made in submitted papers, please, return the final version, via E-mail, including the figures (in above listed formats) as an MS-Word file (not a *.pdf) or preferably prepared by LaTEX or TEX editor since the latter is used for the Journal composition.

Every author will receive free issue of the Journal and author(s) will be provided with10 reprints per the article.



Editor in Chief:
Juraj Breza, FEI STU Bratislava, Slovakia

Executive Editor:
Mojmír Kollár, FEI STU Bratislava, Slovakia

Ladislav Hudec, FIIT STU Bratislava, Slovakia
František Janíček, FEI STU Bratislava, Slovakia
Jiří Lettl, FEL ČVUT Praha, Czech Republic
Amit Chaudhry, University of Pajnab, India
Márius Pavlovič, FEI STU Bratislava, Slovakia
Frank Schwierz, TU Ilmenau, Germany
Vojtech Veselý, FEI STU Bratislava, Slovakia
Hans-Jürgen Zepernick, Blekinge IT, Sweden

Advisory Editorial Board
Peter Ballo, FEI STU Bratislava, Slovakia
Igor Bello, City University of Hong Kong
Zdeněk Bradáč, VUT Brno, Czech Republic
Amit Chaudhry, University of Pajnab, India
Klára Čápová, ŽU Žilina, Slovakia
Daniel Donoval, FEI STU Bratislava, Slovakia
Evangelos Hristoforou, TU Athens, Greece
Hiroshi Iwai, Tokyo IT, Japan
Eduard Kaluš, Schrack Technik Ltd., Bratislava
Patrik Križanský, Schrack Technik Ltd., Bratislava
Štefan Kubíček, IMEC Leuven, Belgium
Daniel Mayer, FEL ZČU Plzeň, Czech Republic
Luděk Žalud, VUT Brno, Czech Republic
Anthony J. Moses, Cardiff University, UK
Jozef Novák, EÚ SAV Bratislava, Slovakia
Viktor Smieško, FEI STU, Bratislava, Slovakia
Milan Tyšler, ÚM SAV Bratislava, Slovakia
Gerhard Wachutka, TU München, Germany
Miroslav Zeman, Delft UT, The Netherlands

Juraj Breza

Mojmír Kollár

De Gruyter Poland
Bogumiła Zuga 32A Str.
01-811 Warsaw, Poland
T: +48 22 701 50 15