In recent years, the implementations of Micropiles have been increased extensively in large project constructions due to the unique advantages of this method comparing to concrete piles. The results of numerical analysis and centrifuge tests show that the efficiency and importance of micropiles can be considered as an effective solution. This research is designed to compare the newly designed system of microbulb with micropile applying a numerical modeling with finite element software Plaxis 3D foundation v1.6. We also used the FHWA code for a comparative study between micropiles and microbulbs. Then the effective factors were analyzed in order to decide which method is better between these two methods of micropile and microbulb. The results showed that the new microbulb system is an appropriate solution for improvement of mechanical properties of the soil, increase of bearing capacity and settlement decrease.
If the inline PDF is not rendering correctly, you can download the PDF file here.
Tom Armour P.E.Paul Groneck P.E. James Keelev.P.E and Sunil Sharma p.E. PhD. (June 2000).” Micropile Design and construction Guidelines Implementation Manual Priority Technologies Program (PTP) Project” Sponsored by FHWA Office of Technology Applications FHWA Federal Lands Highway Division Offices FHWA.
Lizzi F. (1985) ‘Pali radice’ (root piles and ‘reticulated pali radice’) Underpining Glasgow [Lanark]: Surrey University Press 84-151.
Stuedlein A.W. and Gibson M.D. and Horvitz G.E. (2008) “Tension and compression micropile load tests in gravelly sand” 6th International Conference on case histories in Geotechnical engineering VA Arlington No1.12.
Han J. and Ye S.L. (2006) “A field study on the behavior of micropiles in sand under compression or tension” Canadian Geotechnical Journal 43 pp. 19–29.
Reza Ziaie Moayed.and seyed Abolhasan Naeini(2012)”Improvement of Loose Sandy Soil Deposit Using MicroPile” KSCE Journal Of Civil Engineering Springer 334-340.
Muhunthan B. Shu S. and Marek A. R. (2005). “Sand state and performance analysis of micropiles” PhD Thesis Washington State University p. 158.
Sivakumar G. L. Murthy B. and Nataraj M. S. (2004). “Bearing capacity improvement using micropiles: A case study”. Proceedings Geosupport Conference pp. 692-699.
Armin W. Stuedlein Matt D. Gibson Garry E. Horvitz (2008) Hart Crowser Inc. Seattle Washington (USA) 98109.” Tension and compression micropile load test in gravelly sand”. 6th international conference on case histories in geotechnical engineering in Arlington VA August 11-16 2008.
Juran I. Bruce D.A. Dimillio A. and Benslimane A. (1999). “Micropiles: the state of practice. Part II: design of single micropiles and groups and networks of micropiles”. Ground Improvement 3 89-110.
V.M Karpe N. Dias P.Y Sarang (2011). “Micropiles an Innivative Ground Improvement Tools”. International Journal of Earth Sciences and Engineering. pp 11-14.
Kordahi R. (2003) “Underpinning strategies for Buildings with Deep Foundation” M.E. dissertation American University of Beirut.
Yamane T. Nakata Y. and Otani Y. (2000). “Efficiency of micropile for seismic retrofit of foundation system” 12th World Conference on Earthquake Engineering Auckland New Zealand pp. 1-8.
Chango Choi Sam-Deok Cho(2009).” FIELD VERIFICATION STUDY FOR MICROPILE LOAD CAPACITY”. Proceeding of Offshore and port technical group workshop Korea Geotechnical Society Seoul Korea.
Choi C. Goo J-M. Lee J-H and Cho S-D. (2009) “Development of New Micropiling Method Enhancing Frictional Resistance with Geotextile Pack” Proceeding of ISM 9th Workshop on Micropiles London May2009.
Young-Eun Jang Jin-tae Han (2014)” Development on the Micropile for Applying to Artificial Ground above Railroad Site “ Advanced Science and Technology Letters Vol.55 (Architecture and Civil Engineering 2014) pp.43-46.
ASTM D422 (2008). Standard specification for “Particle-Size Analysis of Soils” American Society for Testing and Materials.
ASTM D3080 (2008). Standard specification for “Direct Shear Test for Soils” American Society for Testing and Materials.
ASTM D3080 (2008). Standard specification for “Laboratory Compaction Characteristic of Soil” American Society for Testing and Materials.
ASTM D4253 (2008). Standard specification for “Maximum Index Density and Unit Weight of Soils Using a Vibratory Table1” American Society for Testing and Materials.
ASTM D4254 (2008). Standard specification for “Minimum Index Density and Unit Weight of Soils and Calculation of Relative Density1” American Society for Testing and Materials.
Zienkiewicz O.C. Taylor R.L (1991). “The Finite Element Method” (4thedition) Volume 2، Solid and Fluid Mechanic Dynamic and Non Linearity.Mc Graw Hill u.k.
Van Langen H. (1991) “Numerical analysis of soil-structure interaction”. Dissertation. Delft University of Technology.
R.B.J. Brinkgreve & W. Broere (2005)” PLAXIS 3D FOUNDATION – version1.6”. Delft University of Technology & PLAXIS bv The Netherlands.
Abbas Babaei (2011)” Numerical investigation of axial bearing capacity of piles embedded in sloping ground”. International Journal of the Physical Sciences Vol. 6(33) pp. 7589 – 7603.
Neves M Mestat P Frank R Degny E (2001). “Research on the behavior of bored piles - I. in situ and laboratory experiments” CESAR-LCPC 231: 39-54.
El-Mossallamy Y (2001). “Load-settlement Behavior of Large Diameter Bored Piles in Over-Consolidated Clay”. Proceeding of The 7th International Symposium on Numerical Models in Geotechnical Engineering Graz Austria. pp. 443-450.
Ismael NF (2001). “Axial Load Test Bored Piles and Pile Groups in Cemented Sands”. J. Geotech. Geonviron. Eng. 127(9): 766-773.
A. Alnuaim & M.H.El.Naggar (2015). “Performance of micropiled raft in clay subjected to vertical concentrated load: Centrifuge modeling”. Canadian Geotechnical Journal. November 2015 DOI: 10.1139/cgj-2014-0448.
Pere C. Prat (2016). “Numerical investigation into the failure of a micropile retaining wall”. Dept. of Civil and Environmental Engineering UPC-BarcelonaTECH Spain Computers and Geotechnics.