Study of the sealing performance of tubing adapters in gas-tight deep-sea water sampler

Open access

Abstract

Tubing adapter is a key connection device in Gas-Tight Deep-Sea Water Sampler (GTWS). The sealing performance of the tubing adapter directly affects the GTWS’s overall gas tightness. Tubing adapters with good sealing performance can ensure the transmission of seawater samples without gas leakage and can be repeatedly used. However, the sealing performance of tubing adapters made of different materials was not studied sufficiently. With the research discussed in this paper, the materials match schemes of the tubing adapters were proposed. With non-linear finite element contact analysis and sea trials in the South China Sea, it is expected that the recommended materials match schemes not only meet the requirements of tubing adapters' sealing performance but also provide the feasible options for the following research on tubing adapters in GTWS

If the inline PDF is not rendering correctly, you can download the PDF file here.

  • Abid M. and Ullah B. 2007. Three-dimensional nonlinear finite-element analysis of gasketed flange joint under combined internal pressure and variable temperatures. Journal of Engineering Mechanics 133(2) pp.222-229.

  • Byun W. Kim M.K. Park K.J. Kim S J. Chung M. Cho J.Y. and Park S.H. 2011. Buckling analysis and optimal structural design of supercavitating vehicles using finite element technology. International Journal of Naval Architecture and Ocean Engineering 3(4) pp.274-285.

  • Gu Y.Q. 2000. Principles for selecting seal face mean sealing pressure of mechanical seals. Petro Chemical Equipment 29(2) pp.21-24.

  • Huang H.C. 2010. The design and sea trials of deep-sea gas-tight water sampling system. Ph.D. Zhejiang University.

  • Houghton J.T. Ding Y. Griggs D.J. Noguer M. van der Linden P.J. Dai X. Maskell K. and Johnson C.A. 2001. Climate Change 2001: The Scientific Basis. Intergovernmental panel on climate change (IPCC) third assessment report. UK: Cambridge University Press.

  • Huang H.C. Ye Y.Y. Yang C.J. Leng J.X. and Chen Y. 2011. Study of the sealing characteristic of polytetrafluoroethylene- coated O-ring applied in gas-tight deep-sea water sampler. Advanced Materials Research 295-297 pp.3-10.

  • Huang H.C. Ye Y.Y. Leng J.X. Yuan Z.L. and Chen Y. 2012. Study on the pressure self-adaptive water-tight junction box in underwater vehicle. International Journal of Naval Architecture and Ocean Engineering 4(3) pp.302-312.

  • Kelley D.S. Baross J.A. and Delaney J.R. 2002. Volcanoes fluids and life at mid-ocean ridge spreading centers. Annual Review of Earth Planetary Sciences 30 pp.385-491.

  • Kelley D.S. Lilley M.D. Lupton J.E. and Olson E.J. 1998. Enriched H2 CH4 and 3He concentrations in hydrothermal plumes associated with the 1996 Gorda Ridge eruptive event. Deep-Sea Research II 45(12) pp.2665-2682.

  • Krishna M.M. Shunmugam M.S. and Siva P.N. 2007. A study on the sealing performance of bolted flange joints with gaskets using finite element analysis. International Journal of Pressure Vessels and Piping 84(6) pp.349-357.

  • Li L.P. 2003. The Model SJC6-15 CTD cap-clipped water sampler. China Ocean Technology 22(4) pp.37-39.

  • Lilley M.D. Feeley R.A. and Trefry J.H. 1995. Chemical and biological transformations in hydrothermal plumes. In: Humphris S.E. Zierenberg R.A. Mullineaux L.S. Thompson R.E. (eds.) Seafloor Hydrothermal Systems: Physical Chemical Biological and Geological Interactions. Washington DC: American Geophysical Union (AGU) pp.369-391.

  • Milkov A.V. Claypoo G.E. Lee Y.J. Torres M.E. Borowski W.S. Tomaru H. Sassen R. and Long P.E. 2004. Ethane enrichment and propane depletion in subsurface gases indicate gas hydrate occurrence in marine sediments at southern hydrate ridge offshore oregon. Organic Geochemistry 35(9) pp.1067-1080.

  • Mathan G. and Prasad N.S. 2008. A study on the Sealing performance of flange Joints with gaskets under external bending using finite-element analysis. Journal of Process Mechanical Engineering 222(1) pp.21-29.

  • Nakayama N. Watanabe S. and Tsunogai S. 2002. Nitrogen oxygen and argon dissolved in the northern north Pacific in early summer. Journal of Oceanography 58(6) pp.775-785.

  • Radford-Konery J. Charlou J.L. Donval J.P. Aballéa M. Fouquet Y. and Ondréas H.1998. Distribution of dissolved sulfide methane and manganese near the seafloor at the Lucky Strike (37°17′N) and Menez Gwen (37°50′N) hydrothermal vent sites on the mid-Atlantic Ridge. Deep-Sea Research I 45(2-3) pp.367-386.

  • Sauter E.J. Schlüter M. Wegner J. and Labahn E. 2005. A routine device for high resolution bottom water sampling. Journal of Sea Research 54(3) pp.204-210.

  • Song H.C. Kim T.J. and Jang C.J. 2010. Structural design optimization of racing motor boat based on nonlinear finite element analysis. International Journal of Naval Architecture and Ocean Engineering 2(4) pp.217-222.

  • Subramanian N.R. Koo K.K. and Tye C.Y. 2013. Non- linear deflection analysis of pin-on-package testing using FEA. IEEE 15th Electronics Packaging Technology Conference (EPTC 2013) pp.410-414.

  • Taylor C.D. Doherty K.W. Molyneaux S.J. Morrison III A.T. Billings J.D. Engstrom I.B. Pfitsch D.W. and Honjo S. 2006. Autonomous microbial sampler (AMS) a device for the uncontaminated collection of multiple microbial samples from submarine hydrothermal vents and other aquatic environment. Deep-Sea Research I. 53(5) pp.894-916.

  • Tolosa I. Garciandia F. Zubiri F. Zapirain F. and Esnaola A. 2010. Study of mechanical properties of AISI 316 stainless steel processed by “selective laser melting” following different manufacturing strategies. International Journal of Advanced Manufacturing Technology 51(5-8) pp.639-647.

  • Upchurch 2012. P-350x. [online] Availiable at: [Accessed 28 November 2012].

  • Wen B.C. 2010. Machine design handbook. 5rd Ed. Beijing: China Machine Press.

  • Yu C.L and Lee J.S. 2012.Ultimate strength of simply supported plate with opening under uniaxial compression. International Journal of Naval Architecture and Ocean Engineering 4(4) pp.423-436.

  • Zhang L.Z. Li M. and Hu H. 2012. Study on mechanical properties of PEEK composites. Advanced Materials Research 467-478 pp.519-525.

Search
Journal information
Impact Factor


IMPACT FACTOR 2017: 0.930
5-year IMPACT FACTOR: 0.997

CiteScore 2018: 2.03

SCImago Journal Rank (SJR) 2018: 0.826
Source Normalized Impact per Paper (SNIP) 2018: 1.741

Metrics
All Time Past Year Past 30 Days
Abstract Views 0 0 0
Full Text Views 210 122 1
PDF Downloads 60 45 0