The Adhesive Response of Regolith to Low-Energy Disturbances in Microgravity

Small, airless bodies are covered by a layer of regolith composed of particles ranging from μm-size dust to cm-size pebbles that evolve under conditions very different than those on Earth. Flight-based microgravity experiments investigating low-velocity collisions of cm-size projectiles into regolith have revealed that certain impact events result in a mass transfer from the target regolith onto the surface of the projectile. The key parameters that produce these events need to be characterized to understand the mechanical behavior of granular media, which is composed of the surfaces of small bodies. We carried out flight and ground-based research campaigns designed to investigate these mass transfer events. The goals of our experimental campaigns were (1) to identify projectile energy thresholds that influence mass transfer outcomes in low-energy collision events between cm-size projectiles and μm-size regolith, (2) to determine whether these mass transfer events required a microgravity environment to be observed, and (3) to determine whether the rebound portion of these collision events could be replicated in a laboratory drop tower environment. We found that (1) mass transfer events occurred for projectile rebound accelerations <7.8 m/s² and we were unable to identify a corresponding impact velocity threshold, (2) mass transfer events require a microgravity environment, and (3) ourdrop tower experiments were able to produce mass transfer events. However, drop tower experiments do not exactly reproduce the free-particle impacts and rebound of the long-duration microgravity experiments and yielded systematically lower amounts of the overall mass transferred.