Estimation of OSL trap parameters by optical “cleaning” — a critical study

The so-called thermal “cleaning” applied in thermoluminescence analysis allows distinguishing TL signal originating from different traps of comparable thermal depths. Here, the detailed study on the suitability of a similar approach — which can be called optical “cleaning” — for the analysis of OSL process has been carried out by means of computer modelling. The optical “cleaning” is realized by short optical stimulation applied directly after irradiation. It turns out that this approach does not help to separate signals related to various traps having similar optical cross-section (OCS) values. For some sets of trap parameters, sufficiently good reconstruction of the trap optical cross-sections can be achieved by the analysis of the conventional OSL curve obtained directly after sample irradiation, while the OSL curve analysis after “cleaning” does not provide any additional data. For other cases the analysis of both curves with and without “cleaning” leads to optical cross-section values different from those assumed in the model, but just in such situations the optical “cleaning” can be helpful. The differences between the OSL components of the conventional curve and the one obtained after “cleaning” can be used as indicators of an incompatibility of the trap parameters obtained from the OSL analysis with their actual values.