Thermal management is a crucial step in the design of power electronic applications, especially railroad traction and automotive systems. Mass/size parameters, robustness and reliability of the power electronic system greatly depend on the cooling system type and performance. This paper presents an approximate parameter estimation of the thermal management system required as well as different commercially available cooling solutions. Advantages and drawbacks of different designs ranging from simple passive heatsinks to complex evaporative systems are discussed.
If the inline PDF is not rendering correctly, you can download the PDF file here.
A. D. Rajapakse A. M. Gole and P. L. Wilson "Approximate loss formulae for estimation of IGBT switching losses through EMTP-type simulations" presented at the 6th Int. Conf. Power System Transients Montreal QC Canada Jun. 19-23 2005.
H. Rüedi and D. Tollik "Development of Modular High-Power IGBT Stacks" Power Conversion Conference PCIM 2001 Nuremberg Germany June 2001 pp.1-6.
B.-C. Charboneau "Double-sided liquid cooling for power semiconductor devices using embedded power technology" M.S. thesis Blacksburg Virginia: Virginia Polytechnic institute and State University 2005 pp. 1-2…17-23.
G. Feix; Dieckerhoff S.; Allmeling J.; Schonberger J. "Simple methods to calculate IGBT and diode conduction and switching losses" Power Electronics and Applications EPE '09 13th European Conference 8-10 Sept. 2009 pp.1-8.
"Heatsink Characteristics" International Rectifier Application Note AN-1057 [Online]. Available: http://www.irf.com/technical-info/appnotes/an-1057.pdf
Ahmed M.M.R.; Putrus G.A.; Ran L.; "Predicting IGBT junction temperature under transient condition" Industrial Electronics 2002. ISIE 2002. Proceedings of the 2002 IEEE International Symposium pp. 874-877 vol.3 2002
A. Bhalla "Thermal resistance characterization of Power MOSFETs" Alpha & Omega Semiconductor Jan. 2003 [Online]. Available at http://www.aosmd.com/pdfs/appNotes/character_mosfet.pdf
A. Kolpakov "Cooling of High-Power Systems" Power Electronics Magazine №3 June 2010 ISSN: 2079-9322. [in russian].
Lytron® Total thermal solutions™ homepage. [Online]. Available: http://www.lytron.com/
M. Iyengar Garimella S. V.; "Thermal Optimization and Design for Manufacturability of Liquid-Air Hybrid Cooling Systems " Electronics Cooling Vol. 14(3) pp. 14-21 August 2008.
Jeffers N. Punch J. and Walsh E. "An Experimental Characterisation of Miniature-Scale Cold Plates for Electronics Cooling Applications" Proceedings ASME-JSME Thermal Engineering and Summer Heat Transfer Conference HT2007-321537 Vancouver BC Canada July 8-12 2007.
DAU Ges.m.b.H & CO.KG homepage. [Online]. Available: http://www.dau-at.com
G. Upadhya "Cooligy™ Active Micro-Structure™ Cooling Offers Key to Advanced Processor Performance and Quieter Systems" Cooligy a Division of Emerson Network Power. [Online]. Available: http://www.cooligy.com/pdf/Cooligy_MicroStructure_White_Paper.pdf
J. Schulz-Harder "Review on highly integrated solutions for power electronic devices" Proceedings of the conference on integrated power electronics systems CIPS'2008 Nuremberg Germany.
R. Remsburg "Nonlinear Fin Patterns Keep Cold Plates Cooler" Amulaire Thermal Technology Feb 1 2007. [Online]. Available: http://powerelectronics.com/thermal_management/liquid_cooling/702PET21.pdf
L. Sobotka and R. Herrmann "Intelligent Power Modules Drive Public Transport" Power Electronics Europe Issue 7 Oct. 2009.
D. Hirschi "Understanding Differences Between Thermal Interface Materials: Improve your ability to specify the optimum TIM" Dow Corning Corporation 2008. [Online]. Available: http://www.dowcorning.com/content/publishedlit/11-1708-01.pdf
Chia-Pin Chiu; Biju Chandran; Mello K.; Kelley K. "An accelerated reliability test method to predict thermal grease pump-out in flip-chip applications" Electronic Components and Technology Conference 2001. Proceedings. 51st pp.91-97 2001
Moores K.A.; Joshi Y.K.; Schiroky G.; "Numerical and experimental thermal characterization of a liquid cooled AlSiC power electronics base plate with integral pin fins" Thermal and Thermomechanical Phenomena in Electronic Systems. ITHERM 2000. The Seventh Intersociety Conference vol.2 pp.385-390 vol. 2 2000
J. Schulz-Harder; "Efficient cooling of power electronics" Power Electronics Systems and Applications. PESA 2009. 3rd International Conference pp.1-4 20-22 May 2009
Kaufmann S.; Lang T.; Chokhawala R.; "Innovative press pack modules for high power IGBTs" Power Semiconductor Devices and ICs 2001. ISPSD '01. Proceedings of the 13th International Symposium pp.59-62 2001