Process Security as the Aspect of Total Productive Maintenance

  • 1 Cracow University of Technology, , Kraków, Poland
  • 2 University of Warmia and Mazury in Olsztyn, , Poland


The paper presents the importance of process security as one of the parts of Total Production Maintenance. Knowledge about the standards and factors used in monitoring production processes has been systematized. The good manufacturing practices in production continuity management are presented in the article.

Falls das inline PDF nicht korrekt dargestellt ist, können Sie das PDF hier herunterladen.

  • Anttila, J., Jussila, K., 2018. Organizational Learning in Developing the Integrated Quality Management. Production Enginering Archives, 18, 3–13, DOI: 10.30657/pea.2018.18.01

  • Brzeziński, S., Klimecka-Tatar, D., 2016. Effect of the changes in the forming metal parameters on the value streams flow and the overall equipment effectiveness coefficient, 25th Anniversary International Conference on Metallurgy and Materials, Tanger Ltd., Ostrava, 1750-1755.

  • Cierniak-Emerych, A., Kiełbus, A. and Mazur, M., 2017. Aspects of work, process and product safety, Printing House the Managers of Quality and Production Association, Częstochowa, Poland. ISBN: 978-83-63978-73-0, 7-8.

  • Domagala, M., 2013. Simulation of cavitation in jet pumps, Technical Transactions 110 (5), 51-58.

  • Domagala, M., Momeni, H., Domagala-Fabis, J., Filo, G., Krawczyk, M., 2018a. Simulation of Particle Erosion in a Hydraulic Valve, Mater. Res. Proc., 5, 17-24.

  • Domagala, M., Momeni, H., Domagala-Fabis, J., Filo, G., Kwiatkowski, D., 2018b. Simulation of Cavitation Erosion in a Hydraulic Valve, Mater. Res. Proc., 5, 1-6.

  • Fabis-Domagala, J., 2013. Application of FMEA matrix for prediction of potential failures in hydraulic cylinder, Technical Transactions, 110 (5), 97-104.

  • Fabis-Domagala, Domagala, M., 2017. Matrix FMEA analysis with cause-effect diagram for selected fluid power component, Technical Transactions, 114 (10), 141-146.

  • Filo, G., 2013. Computer monitoring and control system of a local LNG supply station, Technical Transactions, 110 (5), 105-112.

  • Filo, G., 2015. Asynchronous buffer read method in development of DAQ application for supporting research of hydraulic systems, Technical Transactions, 112 (7), 77-82.

  • Gawlik, J. and Kiełbus, A., 2008. Metody i narzędzia w analizie jakości wyrobów, Wyd. Politechniki Krakowskiej, Kraków, 9-78.

  • IEC 61511-1:2016+A1:2017(E), Functional safety - Safety instrumented systems for the process industry sector - Part 1: Framework, definitions, system, hardware and application programming requirements.

  • ISO 13849-1:2006, Safety of machinery - Safety-related parts of control systems - Part 1: General principles for design.

  • Korzekwa, J., Bara, M., Pietraszek J. and Pawlus, P., 2016. Tribological behaviour of Al2O3/inorganic fullerene-like WS2 composite layer sliding against plastic, International Journal of Surface Science and Engineering, 10(6), 570-584.

  • Liker, K.J. and Meier, D., 2005. The Toyota Way Fieldbook: A Practical Guide for Implementing Toyota's 4Ps. McGraw-Hill, ISBN 978-0-07-144893-2.

  • Łazicki, A., Samsel, D. and Krużycka L., 2014. Systemy zarządzania przedsiębiorstwem – techniki Lean Management i Kaizen, Wydawnictwo Wiedza i Praktyka, Warszawa, Poland.

  • Maszke, A., 2019. TPM Safety Impact – Case Study. System Safety: Human - Technical Facility - Environment 1, DOI: 10.2478/czoto-2019-0081

  • Mielczarek, K., Krynke, M., 2018. Plastic production machinery – the evaluation of effectiveness. Production Engineering Archives, 18, 42-45, DOI: 10.30657/pea.2018.18.07

  • Misiurek B., 2017. MTBF, MTTR i MTTF – jak i po co stosować te wskaźniki? Służby Utrzymania Ruchu, 1/2017, Forum Media Polska, Poznań, Poland.

  • Osocha, P., 2018. Calculation of residual life for P91 material based on creep rate and time to rupture, Mater. Res. Proc., 5, 177-182.

  • Pietraszek, J., Szczotok, A., Kolomycki, M., Radek, N. and Kozien, E., 2017. Non-parametric assessment of the uncertainty in the analysis of the airfoil blade traces, Proc., METAL 2017: 26th Int. Conf. Metallurgy and Materials, May 24th-26th 2017, Brno, 1412-1418.

  • Skrzypczak-Pietraszek, E., 2016. High production of flavonoids and phenolic acids for pharmaceutical purposes in Vitex agnus castus L. shoot culture, New Biotechnol. 33, 155-161.

  • Skrzypczak-Pietraszek, E., Kwiecien, I., Goldyn, A., Pietraszek, J., 2017. HPLC-DAD analysis of arbutin produced from hydroquinone in a biotransformation process in Origanum majorana L. shoot culture, Phytochem. Lett., 20, 443-448.

  • Skrzypczak-Pietraszek, E., Piska, K., Pietraszek, J., 2018. Enhanced production of the pharmaceutically important polyphenolic compounds in Vitex agnus castus L. shoot cultures by precursor feeding strategy, Eng. Life Sci., 18, 287-297.

  • Ulewicz, R., Selejdak, J., Borkowski, S., Jagusiak-Kocik, M., 2013. Process management in the cast iron foundry, Metal 2013 Proc. 22nd Int. Conf. Metallurgy and Materials, Ostrava, Tanger, 1926-1931.

  • Ulewicz, R., Szataniak, P., Novy, F., 2014. Fatigue properties of wear resistant marten-sitic steel, Metal 2014 Proc. 23rd Int. Conf. Metallurgy and Materials, Ostrava, Tanger, 784-789.

  • Wilmott P. and McCarthy D., 2000. TPM. A Route to World-Class Performance. Butter-worth-Heinemann, Oxford, UK, 264.

  • Wlodarczyk, R., Dudek, A., Nitkiewicz, Z., 2011. Corrosion analysis of sintered material used for low-temperature fuel cell plates, Arch. Metall. Mater., 56, 181-186.


Zeitschrift + Hefte