Determination of the Optimum Percentage of High Strength Bars in RC Beams with Combined Reinforcement Using Fem

  • 1 Czestochowa University of Technology, , Poland
  • 2 Lviv Polytechnic National University, , Ukraine

Abstract

In this work on the basis of the developed and tested mathematical model, the numerical experiment is conducted in order to study in more detail the specifics of performance of concrete beams` with combined reinforcement. For this purpose nine series of reinforced concrete beams with different combination of steel bars (A400C, At800, A1000) and ribbon reinforcement (C275) were modeled. In the developed series two classes of concrete were used: C50/60, C35/45. The functions derived on the basis of mathematical modeling allow us to determine the recommended percentage of high-strength reinforcement of common reinforced concrete structures with single reinforcement. Therefore, the possibility is obtained to reduce the total structures` reinforcement percentage, increasing their deformability by the specified value without affecting the bearing capacity.

If the inline PDF is not rendering correctly, you can download the PDF file here.

  • Abu-Tair, A., Rigden, S., Burley, E., 1996. Testing the Bond Between Repair Materials and Concrete Substrate, ACI Materials Journal, 93(6), 553-558.

  • Blikharskyy, Z., Selejdak, J., Blikharskyy, Y., Khmil, R., 2019. Corrosion of Reinforce Bars in RC Constructions, System Safety: Human - Technical Facility – Environment, 1, 277-283. DOI: 10.2478/czoto-2019-0036.

  • Blikharskyy, Z., Vashkevych, R., Vegera, P., Blikharskyy, Y., 2020. Crack Resistance of RC Beams on the Shear, Lecture Notes in Civil Engineering, 47. DOI: 10.1007/978-3-030-27011-7_3.

  • Blikharskyy, Y., Khmil, R., Blikharskyy, Z., 2018. Research of RC Columns Strengthened by Carbon FRP Under Loading, Matec Web of Conferences, 174, 1-8. DOI: 10.1051/matecconf/201817404017.

  • Bobalo, T., Blikharskyy, Y., Kopiika, N., Volynets, M., 2020. Serviceability of RC Beams Reinforced with High Strength Rebar’s and Steel Plate, Lecture Notes in Civil Engineering, 47. DOI: 10.1007/978-3-030-27011-7_4.

  • Bobalo, T., Blikharskyy, Y., Vashkevich, R., Volynets, M., 2018. Bearing capacity of RC beams reinforced with high strength rebars and steel plate, Matec Web of Conferences, 230, 02003, DOI: 10.1051/matecconf/201823002003.

  • Brózda, K., Selejdak, J., Koteš, P., 2017. The Analysis of Beam Reinforced with FRP Bars in Bending, Procedia Engineering, 192, 64-68. DOI: 10.1016/j.proeng.2017.06.011.

  • Khmil, R., Tytarenko R., Blikharskyy, Y., Vegera, P., 2018. Development of the procedure for the estimation of reliability of reinforced concrete beams, strengthened by building up the stretched reinforcing bars under load, Eastern-European Journal of Enterprise Technologies, 5/7 (95). DOI: 10.15587/1729-4061.2018.142750.

  • Kos, Ž., Gotal Dmitrović, L., Klimenko, E., 2017. Developing a Model of a Strain (Deformation) of a Damaged Reinforced Concrete Pillar in Relation to a Linear Load Capacity, Technical Journal, 11(4), 150-154, (https://hrcak.srce.hr/190990).

  • Krainskyi, P., Blikharskyy, Y., Khmil, R., Vegera, P., 2020. Crack Resistance of RC Columns Strengthened by Jacketing, Lecture Notes in Civil Engineering, 47. DOI: 10.1007/978-3-030-27011-7_25.

  • Krainskyi, P., Blikharskyy, Y., Khmil, R., Blikharskyy, Z., 2018. Experimental Study of the Srengthening Effect of Reinforced Concrete Columns Jacketed Under Service Load Level, Matec Web of Conferences, 183, 1-5. DOI: 10.1051/matecconf/201818302008.

  • Lipiński, T., 2017. Corrosion of S235JR Steel in NaCl Environment at 3 Degrees C. 26th International Conference on Metallurgy and Materials, Ostrava, Tanger, 660-665.

  • Lobodanov, M., Vegera, P., Blikharskyy, Z., 2020. Planning Experiment for Researching Reinforced Concrete Beams with Damages, Lecture Notes in Civil Engineering, 47. DOI: 10.1007/978-3-030-27011-7_31.

  • Selejdak, J., Blikharskyy, Y., Khmil, R., Blikharskyy, Z. 2020. Calculation of Reinforced Concrete Columns Strengthened by CFRP, Lecture Notes in Civil Engineering, 47. DOI: 10.1007/978-3-030-27011-7_51.

  • Selejdak, J., Khmil R., Blikharskyy, Z., 2018. The Influence of Simultaneous Action of the Aggressive Environment and Loading on Strength of RC Beams, Matec Web of Conference, 183, 1-6. DOI: 10.1051/matecconf/201818302002.

  • Sobol, K., Blikharskyy, Z., Petrovska, N., Terly`a, V., 2014. Analysis of Structure Formation Peculiarities during Hydration of Oil-Well Cement with Zeolitic Tuff and Metakaolin Additives, Chemistry & Chemical Technology, 8(4), 461-465. DOI: 10.23939/chcht08.04.461.

  • Tayeh, B. Bakar, B.H., Megat, J., Megat, A., Voo, Y., 2013. Evaluation of Bond Strength between Normal Concrete Substrate and Ultra High Performance Fiber Concrete as a Repair Material, Procedia Engineering, 54, 554–563.

  • Vegera, P., Vashkevych, R., Blikharskyy, Z., 2018. Fracture Toughness of RC Beams With Different Shear Span, Matec Web of Conferences, 174, 1-8, DOI: 10.1051/matecconf/201817402021.

  • Yang, M., Zhou, J., Zhang, H., Liao, L., Zhao, R., 2018. Magnetic Memory Detection of Rebar Corrosion in Concrete, Journal of Building Materials, 21, 345-350. DOI: 10.3969/j.issn.1007-9629.2018.02.028.

OPEN ACCESS

Journal + Issues

Search