Analysis of the Influence of the Heat-Absorbing Surface of an Air-Cooled Solar Collector on its Thermal and Mechanical Properties

Open access


This paper presents the analysis of existing forms of heat absorbing surfaces of air solar collectors, which gained the greatest popularity in the world. The obtained data allowed to conclude that there is a need for the development of solar collectors with air as a coolant with an improved form of heat absorber, which will reduce the operational and capital costs of solar systems and allow the efficient use of such structures in a moderate climate without additional mechanisms for the transfer of coolant. The use of computer simulation helped to compare the thermal characteristics of air-borne solar collectors of a different design. The substantiation of the expediency of installing as a heat absorber of flow turbulators in the form of a screw has been fulfilled, as well as the height of the air channel of the solar collector has been determined, in which the maximum heating of the transfer medium is observed. In addition, the loss of pressure in the air channel of the solar collector with flow turbulators was determined and the comparison of the obtained data with the values of pressure losses in the air collector of the matrix type and the air collector with V-shaped ribs was made.

If the inline PDF is not rendering correctly, you can download the PDF file here.

  • Aoues K. Noureddine M. Zellouf M. Benchabane A. 2011 Thermal performance improvement of solar air flat plate collector: A theoretical analysis and an experimental study in Biskra Algeria. Int. J. Ambient Energy 32(2) 95-102.

  • Bochenek D. Niemiec P. Korzekwa J. Durtka B. Stoklosa Z. 2018 Microstructure and Properties of the Ferroelectric-Ferromagnetic PLZT-Ferrite Composites. Symmetry-Basel 10 (3) art.59.

  • Butuzov V. 2013 Air solar collectors. Plumbing heating air conditioning 7 1-5 (Russian).

  • Domagala M. Momein H. Domagala-Fabis J. Filo G. Kwiatkowski D. 2018a Simulation of Cavitation Erosion in a Hydraulic Valve. Mater. Res. Proc. 5 1-6.

  • Domagala M. Momeni H. Domagala-Fabis J. Filo G. Krawczyk M. 2018b Simulation of Particle Erosion in a Hydraulic Valve. Mater. Res. Proc. 5 17-24. Dudek A. 2009 Surface properties in titanium with hydroxyapatite coating. Opt. Appl. 39 825-831.

  • Dudek A. 2011 Investigations of Microstructure and Properties in Bioceramic Coatings Used in Medicine. Arch. Metall. Mater. 56 135-140.

  • Dwornicka R. Radek N. Krawczyk M. Osocha P. Pobedza J. 2017 The Laser Textured Surfaces of the Silicon Carbide Analyzed with the Bootstrapped Tribology Model. Metal 2017: 26th Int. Conf. Metallurgy and Materials Tanger 1252-1257.

  • Fajst V. 2008 The basic provisions of designing of passive houses / trans. from German with additions; (Ed.) Elokhova A. Association of Construction Universities 144. ISBN: 978-5-93093-619-3 (Russian).

  • Gadek-Moszczak A. Matusiewicz P. 2017. Polish Stereology – a Historical Review. Image Anal. Stereol. 36 207-221.

  • Kim M.Ch. 2001 The Oncet of Natural Convection and Heat Transfer Correlation in Horizontal Fluid Layer Heated Uniformly from Below. KSME International Journal 15(10) 1451–1460.

  • Maszke A. Dwornicka R. Ulewicz R. 2018 Problems in the implementation of the lean concept at a steel works – Case study. MATEC Web Conf. 183 art. 01014. Mendaza J. M. 2014 Solar Collectors for Air Heating Profitability Analysis. University of Gavle 77

  • Misak J. Vozniak O. Datsko O. Shapoval S. 2014. Solar power engineering: theory and practice: monograph. Lviv: Lviv Polytechnic Publishing House 340. ISBN: 978-617-607-597-4 (Ukrainian)

  • Patent No. 1346913 USSR. Solar thermal collector. Dobrundashvili Z. №39 1987..

  • Patent No. 68773 UA. Thermosyphon solar collector Zhelyh V. Lesyk Ch. №7 2012.

  • Pietraszek J. Dwornicka R. Krawczyk M. Kołomycki M. 2017a. The non-parametric approach to the quantification of the uncertainty in the design of experiments modelling. UNCECOMP 2017 NTU of Athens 598-604.

  • Pietraszek J. Gadek-Moszczak A. Torunski T. 2014. Modeling of errors counting system for PCB soldered in the wave soldering technology. Adv. Mater. Res.-Switz. 874 139-143.

  • Pietraszek J. Szczotok A. Kolomycki M. Radek N. Kozien E. 2017b. Non-parametric assessment of the uncertainty in the analysis of the airfoil blade traces. Metal 2017: 26th Int. Conf. Metallurgy and Materials Ostrava Tanger 1412-1418.

  • Radek N. Szczotok A. Gadek-Moszczak A. Dwornicka R. Broncek J. Pietraszek J. 2018. The impact of laser processing parameters on the properties of electro-spark deposited coatings. Arch. Metall. Mater. 63 809-816.

  • Razak A. Majid Z. Azmi W. Azmi W. Ruslan M. Choobchian Sh. Najafi G. Sopian K. 2016 Review on matrix thermal absorber designs for solar air collector. Renewable and Sustainable Energy Reviews 64 682-693.

  • Scendo M. Trela J. Radek N. 2014. Influence of laser power on the corrosive resistance of WC-Cu coating. Surf. Coat. Tech. 259 401-407.

  • Skrzypczak-Pietraszek E. Piska K. Pietraszek J. 2018. Enhanced production of the pharmaceutically important polyphenolic compounds in Vitex agnus castus L. shoot cultures by precursor feeding strategy. Eng. Life Sci. 18 287-297.

  • Tiziani A. Molinari A. Kazior J. Straffelini G. 1990. Effect of vacuum sintering on the mechanical-properties of copper-alloyed stainless-steel. Powder Metall. Int. 22 17-19.

  • Usachev A. 2015 Analysis of the dynamics of the world industry of solar energy. Analysis of the dynamics of the world industry of solar energy. Internet Journal Naukovodenie 7(4) 1-10 (Russian).

  • Weiss W. Mauthner F. Solar heat worldwide. Marcets and contribution to the Energy Supply 2010. Edition 2012 / AEE – Institute for Sustainable Tachnologies Gleisdorf Austria: 62.

  • Zhelykh V. Kozak Ch. Furdas Y. Spodyniuk N. Dzeryn O. 2014 Energy saving technologies in production complexes for agricultural purpose. Journal of Lviv Politechnic National University. Theory and practice of building 781 230–233.

  • Zhelykh V. Shapoval S. Venhryn I. 2017 The potential of radiant energy and its use for low-temperature solar collectors. Journal of Lviv Politechnic National University. Theory and practice of building 17 80-83.

  • Zhelykh V. Kozak Ch. Savchenko O. 2016 Using of Thermosiphon Solar Collector in an air Heating System of Passive House. Pollack Periodica 11(2) 125-133.

  • Zorawski W. Chatys R. Radek N. Borowiecka-Jamrozek J. 2008. Plasma-sprayed composite coatings with reduced friction coefficient. Surf. Coat. Tech. 202 4578-4582.

Journal information
All Time Past Year Past 30 Days
Abstract Views 0 0 0
Full Text Views 104 104 8
PDF Downloads 62 62 5