Assessment of Production Processes on the Base of the Second Toyota Management Principle – Case Study

  • 1 Czestochowa University of Technology, , Poland

Abstract

The article presents a case study of the practical use of BOST surveys to identify the most important areas in the production process. It was made the identification of areas from the second Toyota’s management principle point of view. This principle is based on the conviction that appropriate process leads to appropriate results. If the process is designed properly, then good results will come automatically. The research object is company producing the mineral water and carbonated drinks. Some production workers of the company with the help of BOST questionnaire survey showed, which factors are the most important. In frames of the work it was made short characteristics of the research object - producer of mineral water, the presentation of research methodology and content second Toyota’s management principle. Based on the survey results of carried out on the population of production workers, a series of importance areas for improvement was formulated. The aim of the analysis is to present which factors are the most important by building the significance sequences of obtained results. In the article were presented results of analysis with using some statistical tools. The results obtained for the type of small and medium-sized enterprises overlap with the results of tests verified in other enterprises.

Falls das inline PDF nicht korrekt dargestellt ist, können Sie das PDF hier herunterladen.

  • Amasaka, K., 2012. Science TQM, New Quality Management Principle, The Quality Management Strategy of Toyota Introduction, Bentham Sc., U Arab Emirates.

  • Borkowski, S., 2012. BOST Method as the Instrument of Assessment Process Functioning according to Toyota Principles, University of Maribor, Maribor.

  • Borkowski, S., 2016. Scientific Potential of Toyotarity and BOST Method, Polish Quality Institute, Warsaw.

  • Borkowski, S., Jagusiak-Kocik, M., Ingaldi, M., 2014. Evaluation of the Manufacturing of Components for Combine Harvesters Using Bost Method, 23nd International Conference on Metallurgy and Materials METAL, Brno.

  • Borkowski, S., Ulewicz, R., 2009. Instruments of Production Processes Improvement, PTM, Warsaw.

  • Fouad, R.H., Mukattash, A., 2010. Statistical Process Control Tools: A Practical guide for Jordanian Industrial Organizations, Jordan Journal of Mechanical and Industrial Engineering, Volume 4, Number 6, 693-700.

  • Gao, S., Low, S.P., 2015. Toyota way style human resource management in large Chinese construction firms. A qualitative study, International Journal of Construction Management 15(1), 17–32.

  • Ignaszak, Z., Sika, R., 2012. Specificity of SPC Procedures Application in Foundry in Aspect of Data Acquisition and Data Exploration, Archives of Foundry Engineering, Vol. 12, Issue 4, 65-70. DOI: 10.2478/v10266-012-0108-8

  • Knop, K., 2018. Statistical Control of the Production Process of Rolled Products, Production Engineering Archives, 20(2018), 26-31. DOI: 10.30657/pea.2018.20.06

  • Knop, K., Mielczarek, K., 2018. Assessment of Production Processes Functioning in the Case of Air Bag Production, MATEC Web Conf. 183, 04009. DOI: 10.1051/matecconf/201818304009

  • Liker, J.K., Franz, J., 2011. The Toyota Way to continuous improvement, McGraw Hill.

  • Liker, J.K., Hoseus, M., 2008. Toyota Culture: The Heart and Soul of the Toyota Way. McGraw-Hill, New York.

  • Mielczarek, K., 2015. Factors Describing the Concept of Plastics Company Development, Production Engineering Archives, 8/3(2015), 32-35. DOI: DOI: 10.30657/pea.2015.08.08

  • Selejdak, J., 2015. Use of the Toyota Management Principles for Evaluation of the Company’s Mission, Production Engineering Archives, 1/1(2013), 13-15. DOI: 10.30657/pea.2013.01.04

  • Uçurum, M., Çolak, M., Çınar, M., Dışpınar, D., 2016. Implementation of Statistical Process Control (SPC) Techniques as Quality Control in Cast Iron Part Production, Journal of Engineering Precious Research and Application, Vol. 1, Issue 3, 14-24.

  • Wheeler, D., 2000. Understanding Variation: The Key to Managing Chaos, 2 Revised Edition, SPC Press.

OPEN ACCESS

Zeitschrift + Hefte

Suche