Numerical Simulation of Fluid Flow inside the Flow Control Valve

Open access

Abstract

Hydraulic valves are widely used in many branches and they are still developed and improved. Due to the problem with verification of flow phenomena which appears during valves operation numerical simulations methods are tools which allows to improved valves design. This paper presents numerical simulation of fluid flow inside flow control valve.

If the inline PDF is not rendering correctly, you can download the PDF file here.

  • Bara M. Kmita T. Korzekwa J. 2016. Microstructure and properties of composite coatings obtained on aluminium alloys. Arch. Metall. Mater. 61 1107-1112. DOI: 10.1515/amm-2016-0238

  • Beune A. Kuerten J.G.M. van Heumen M.P.C. 2012. CFD analysis with fluid–structure interaction of opening high-pressure safety valves Computers & Fluids 64 108-116. DOI: 10.1016/j.compfluid.2012.05.010

  • Domagala M. 2008. CFD analysis of pilot operated relief valve Technical Transactions. Mechanics 3-M 23-29

  • Domagala M. 2015. Modelling of direct acting relief valve using CFD-FSI simulation Technical Transactions. Mechanics 2-M 43-48

  • Domagala M. Momeni H. Domagala-Fabis J. Filo G. Krawczyk M. 2018a. Simulation of Cavitation Erosion in a Hydraulic Valve. Materials Research Proceedings 5 1-6. DOI: 10.21741/9781945291814-1

  • Domagala M. Momeni H. Domagala-Fabis J. Filo G. Kwiatkowski D. 2018b. Simulation of Particle Erosion in a Hydraulic Valve. Materials Research Proceedings 5 17-24. DOI: 10.21741/9781945291814-4

  • Ferdek U.; Kozien M. S. 2013. Simulation of Application of FGM Piezoelectric Actuators for Active Reduction of Beam Vibrations. Acta Physica Polonica A 123 1044-1047. DOI: 10.12693/APhysPolA.123.1044

  • Gadek-Moszczak A. Radek N. Wronski S. Tarasiuk J. 2014. Application the 3D image analysis techniques for assessment the quality of material surface layer before and after laser treatment. Adv. Mat. Res. Switz. 874 133-138. DOI: 10.4028/www.scientific.net/AMR.874.133

  • Gawlik J. Kielbus A. Karpisz D. 2015. Application of an integrated database system for processing difficult material. Solid State Phenomena 223 35-45. DOI: 10.4028/www.scientific.net/SSP.223.35

  • Karpisz D. Kielbus A. 2018. Selected problems of designing modern industrial databases. MATEC Web Conf. 183 art. 01017. DOI: 10.1051/matecconf/201818301017

  • Kielbus A. Karpisz D. 2019. Risk management as a process security tool. System Safety: Human-Technical Facility-Environment 1 234-239. DOI: 10.2478/czoto-2019-0030

  • Kozien E. Kozien M.S. 2017. Interval analysis as a method of measurement of uncertainity in the check-list method applied to identification of stage phase of companies. 26th Int. Scientific Conf. Economic and Social Development. Zagreb Varazdin 210-215.

  • Krawczyk J. Sobczyk A. 2018. Tests of New Methods of Manufacturing Elements for Water Hydraulics. Materials Research Proceedings 5 200-205. DOI: 10.21741/9781945291814-35

  • Lipinski T. Wach A. 2014. Influence of outside furnace treatment on purity medium carbon steel. Metal 2014: 23rd Int. Conf. Metallurgy And Materials Ostrava Tanger 738-743.

  • Lisowski E. Filo G. Rajda J. 2015. Pressure compensation using flow forces in a multi-section proportional directional control valve Energy Conv. Manag. 103 1052-1064. DOI: 10.1016/j.enconman.2015.07.038

  • Lisowski E. Filo G. Rajda J. 2018. Analysis of flow forces in the initial phase of throttle gap opening in a proportional control valve Flow Meas. Instrum. 59 157-167. DOI: 10.1016/j.flowmeasinst.2017.12.011

  • Lisowski E. Filo G. Rajda J. 2016. CFD analysis of the characteristics of a proportional flow control valve with an innovative opening shape Energy Conv. Manag. 123 15-28. DOI: 10.1016/j.enconman.2016.06.025

  • Opydo M. Kobylecki R. Dudek A. Bis Z. 2016. The effect of biomass co-combustion in a CFB boiler on solids accumulation on surfaces of P91 steel tube samples. Biomass & Bioenergy 85 61-68. DOI: 10.1016/j.biombioe.2015.12.011

  • Pietraszek J. Kolomycki M. Szczotok A. Dwornicka R. 2016. The fuzzy approach to assessment of ANOVA results. ICCCI 2016: Conf. on Comp. Collective Intell. Springer 260-268. DOI: 10.1007/978-3-319-45243-2_24

  • Pobedza J. Sobczyk A. 2013. Modern Coating Used in High Pressure Water Hydraulic Components. Key Engineering Materials 542 143-155. DOI: 10.4028/www.scientific.net/KEM.542.143

  • Radek N. Szczotok A. Gadek-Moszczak A. Dwornicka R. Broncek J. Pietraszek J. 2018. The impact of laser processing parameters on the properties of electro-spark deposited coatings. Arch. Metall. Mater. 63 809-816. DOI: 10.24425/122407

  • Skrzypczak-Pietraszek E. Reiss K. Zmudzki P. Pietraszek J. 2018. Enhanced accumulation of harpagide and 8-O-acetyl-harpagide in Melittis melissophyllum L. agitated shoot cultures analyzed by UPLC-MS/MS. PLoS ONE 2018 13 art. e0202556. DOI: 10.1371/journal.pone.0202556

  • Szczotok A. Radek N. Dwornicka R. 2018. Effect of the induction hardening on microstructures of the selected steels. METAL 2018: 27th Int. Conf. Metallurgy and Materials. Ostrava Tanger 1264-1269.

Search
Journal information
Metrics
All Time Past Year Past 30 Days
Abstract Views 0 0 0
Full Text Views 16 16 7
PDF Downloads 16 16 13