New Measurements Results Achieve for Proactive Maintenace with Vibro-Expert Diagnosis System

Open access

Abstract

One important objectives of proactive maintenance are the knowledge of the technical state of machinery, the intelligent planning of interventions according to the diagnosis technique, identification and correction of assembling errors. The aim of this paper is to present a new case on the vibrations diagnosis of hydro-aggregate CAMPELA - CHE Dubasari (MOLDOVA). The VIBRO EXPERT diagnostic system used on the CAPMELA hydro-aggregate is designed to measure, monitor, diagnose, and analyze the technical and functional parameters in order to safe use of the hydro-aggregate turbine, using the vibrations data measurement. The proactive maintenance concept is being used more and more thanks to the development of these intelligent monitoring and control systems, in order to prevent interruptions due to major failures.

REFERENCES

  • [1] Case study regarding measurements implemented with the repair entry a hydrogregate CAMPELA with vibro expert diagnosis system – Ionel Rusa, Cornel Marin, Marius Baidoc - International Conference ICOMECYME 2017, Bucharest, Romania

  • [2] Some results of vibroacustical diagnosis for industrial equipment in LUKOIL REFINERY–Ionel Rusa, Cornel Marin - 8th International Conference MECAHITECH‘16, Bucharest, Romania

  • [3] Introducere în vibraţii - Ref.Doc.MI 119 – Notă tehnică / Mobil Industrial – Piteşti (2013)

  • [4] Mentenanţa utilajelor dinamice vol. 1 – Mobil Industrial AG – Piteşti (2011)

  • [5] Vibration Calibration Technique and basics of Vibration Measurement - Torben R. Licht – Singapore 2011

  • [6] An Introduction to Vibration Analysis Theory and Practice

  • [7] Automated machinery maintenance – Bill Powel, Tony Burnet

  • [8] Bearing vibration analysis – Connected Technology Center - Training modules

  • [9] S.C. VIBRO SYSTEM S.R.L. www.vibrosystem.ro - Global Relative Vibration Level Bulletin No. 1.

  • [10] S.C. VIBRO SYSTEM S.R.L. www.vibrosystem.ro - Global Speed Absolute Abs. Rate Bulletin no. 2.

  • [11] S.C. VIBRO SYSTEM S.R.L. www.vibrosystem.ro - Global Absolute Movement Level Bulletin No. 3

  • [12] S.C. VIBRO SYSTEM S.R.L. www.vibrosystem.roMEASUREMENT TECHNIC REPORT sept 2016- ANNEXE 1

  • [13] Bill Duncan - “Bureau of Reclamation Plumb and Alignment Standards for Vertical Shaft Hydro-units”.

  • [14] ISO 7919-1 : 1996 Vibraţii mecanice ale maşinilor. Măsurarea arborilor rotativi şi criteriile de evaluare. Partea 1: Prescripţii generale.

  • [15] ISO 7919-5 : 2005 Vibraţii mecanice. Evaluarea vibraţiilor maşinilor prin măsurători ale arborelui rotativ. Partea 5: Hidroagregate şi pompe.

  • [16] ISO 10817-1 : 1998 Sisteme de măsurare a vibraţiilor relative a arborilor rotativi. Partea 1: Detectarea vibraţiilor absolute şi relative radiale.

  • [17] ISO 10816-1 : 1995 Vibraţii mecanice. Evaluarea vibraţiilor maşinilor prin măsurători pe părţile non-rotative. Partea 1: Prescripţii generale.

  • [18] ISO 10816-5 - 2000 Vibraţii mecanice. Evaluarea vibraţiilor maşinilor prin măsurători pe părţile non-rotative. Partea 5: Hidroagregate şi pompe.

Journal Information

Metrics

All Time Past Year Past 30 Days
Abstract Views 0 0 0
Full Text Views 9 9 9
PDF Downloads 1 1 1