Over the last few decades, researchers has been focused on the study of processing using different methods of new biocompatible and/or biodegradable materials such as permanent or temporary medical implants in reconstructive surgery. The advantages of obtaining biomedical implants by Powder Metallurgy (P/M) techniques are (i) obtaining the near-net-shaped with complex forms, (ii) making materials with controlled porosity or (iii) making mechanically resistant sintered metallic materials used as reinforcing elements for ceramic/polymeric biocompatible materials. In this first part of the 2-part review, the most used and newest metallic biomaterials obtained by P/M methods are presented, along with their compaction and sintering behavior and the properties of the porous biomaterials studied in correlation with the biomedical domain of application.
If the inline PDF is not rendering correctly, you can download the PDF file here.
 M. Moravej, D. Mantovani, Review. Biodegradable Metals for Cardiovascular Stent Application: Interests and New Opportunities, Int. J. Mol. Sci. 12 (2011) 4250-4270.
 F.V. Anghelina, D. Ungureanu, V. Bratu, I.N. Popescu*, C.O. Rusanescu, Fine Structure Analysis of Biocompatible Ceramic Materials Based Hydroxyapatite and Metallic Biomaterials 316L, APPL SURF SCI, 285 A, (2013) 65-71.
 J. Čapek, D. Vojtěch, Powder metallurgical techniques for preparation of biomaterials, Manuf.Technol., 15(6)(2015), 964-969.
 H. Hermawan, H. Alamdari, D. Mantovani, D. Dube, Iron-manganese: new class of metallic degradable biomaterials prepared by powder metallurgy, Powder Metall. 51(2008) 38–45.
 Ayşe Eda Onar and Koray Gençoğlan, Biomaterials (lecture), Muğla Sıtkı Koçman University.
 D. Vojtech, J. Kubasek, J. Serak, P. Novak, Mechanical and corrosion properties of newly developed biodegradable Zn-based alloys for bone fixation, Acta Biomaterialia, 7(9)(2011)3515-3522.
 F.Y. Zhou, B.L. Wang, et.al., Microstructure, corrosion behavior and cytotoxicity of Zr–Nb alloys for biomedical application, Materials Science and Engineering C 32(4) May (2012) 851–857.
 C.M. Cotrut, M. Tarcolea, M.D. Vranceanu, A.I. Gherghilescu, N. Ghiban, F. Baciu, I.C. Ionescu, Stainless Steel Brackets: In Vitro Corrosion Behaviour And Mechanical Debonding Test, Solid State Phenomena, 216 (2014) 187-193.
 Robert B. Heinmann, Structure, properties, and biomedical performance of osteoconductive bioceramic coatings, Surface & Coatings Technology 233 (2013) 27–38.
 H.F. Li, F.Y. Zhou, L. Li, Y.F. Zheng, Design and development of novel MRI compatible zirconium ruthenium alloys with ultralow magnetic susceptibility, NATURE, Scientific Reports 6, Article number: 24414 (2016).
 K. Mediaswanti et al., A Review on Bioactive Porous Metallic Biomaterials, J Biomim Biomater Tissue Eng 18(1) (2013) 2-8.
 G. Ryan, A. Pandit, D. Panagiotis-Apatsidis, Fabrication methods of porous metals for use in orthopaedic applications, Biomaterials 27 (2006) 2651–2670.
 Montasser Dewidar, Influence of processing parameters and sintering atmosphere on the mechanical properties and microstructure of porous 316L stainless steel for possible hard-tissue applications, Int. Journal of Mech. & Mechatronics Eng. IJMME-IJENS, 12 (1) (2012) 10-24.
 Luana Marotta Reis de Vasconcellos et. al., Porous Titanium Scaffolds Produced by Powder Metallurgy for Biomedical Applications, Materials Research, 11 (3), (2008) 275-280.
 Jiunn-Der Liao, Han Lee and Chih-Kai Yao, Powder Metallurgy Based Porous Metal Biomaterials, J Powder Metall Min (2013), 2-4.
 Gang Chen, Peng Cao, Neil Edmonds, Porous NiTi alloys produced by press-and-sinter from Ni/Ti and Ni/TiH2 mixtures, Materials Science & Engineering A 582 (2013) 117–125.
 A.H. Yusop, A.A. Bakir, N.A. Shaharom, M.R. Abdul Kadir, and H. Hermawan, Porous BiodegradableMetals for Hard Tissue Scaffolds: A Review, International Journal of Biomaterials, Article ID 641430 (2012), 1-10.
 Zhu, S.L., Yang, X.J., Fu, D.H., Zhang, L.Y., Li, C.Y., Cui, Z.D., Stress–strain behavior of porous NiTi alloys prepared by powders sintering, Materials Science and Engineering A, 408 (2005) 264–268.
 Ma Qian, Cold Compaction and Sintering of Titanium and Its Alloys for Near-Net-Shape or Preform Fabrication, Int. Journal of Powder Metallurgy, 46 (5)(2010)29-44.
 I.M. Robertson, G.B. Schaffer, Review of densification of titanium based powder systems in press and sinter processing. Powder Metallurgy, 53 (2)(2010) 146-162.
 Miriam Kupková et al., Corrosion Behaviour of Powder Metallurgy Biomaterials from Phosphated Carbonyl-Iron Powders, Int. J. Electrochem. Sci., 10 (2015) 671-681.
 H. Hermawan, D. Dube, D. Mantovani, Development of degradable Fe-35Mn alloy for biomedical application, Adv. Mater. Res. 15 (2007) 107–112.
 H. Hermawan, Conception, Développement et Validation d’Alliages Métalliques Biodégradables pour Emploi dans le Domaine de la Chirurgie Endovasculaire. PhD Thesis, Université Laval, Quebec, Canada, May 2009.
 R. Waksman et. al. Short-term effects of biocorrodible iron stents in porcine coronary arteries, J. Interv. Cardiol. 21 (2008) 15–20.
 B. Wegener et. al, Microstructure, cytotoxicity and corrosion of powder-metallurgical iron alloys for biodegradable bone replacement materials. Mater. Sci. Eng. B 176 (2011) 1789.
 Y. Torres, J.J. Pavon, I. Nieto, J.A. Rodriguez, Conven-tional Powder Metallurgy Process and Characterization of Porous Titanium for Biomedical Applications, Metallurgical and Materials Transactions B-Process Metallurgy and Materials Processing Science 42 (2011) 891-900.
 L. Bolzoni, E.M. Ruiz-Navas and E. Gordo, Processing of Elemental Titanium by Powder Metallurgy Techniques Materials Science Forum, 765 (2013) 383-387.
 Amigó, A; Zambrano, J; Martinez, S; Amigó, V., Microstructural Characterization of Ti-Nb-(Fe-Cr) Alloys Obtained by Powder Metallurgy, European Congress and Exhibition on Powder Metallurgy. European PM Conference Proceedings; Shrewsbury EPMA (2014), 20-25.
E. Schüller, O.A. Hamed, M. Bram, D. Sebold, H.P. Buchkremer, D. Stöver, Hot Isostatic Pressing (HIP) of Elemental Powder Mixtures and Prealloyed Powder for NiTi Shape Memory Parts, Adv. Eng. Mater.5 (12) (2003) 918–924.
 Aris Widyo Nugroho, PhD Thesis. Investigation of the production and mechanical properties of porous Beta Titanium alloy compacts prepared by powder metallurgy processes for biomedical applications, April 2013.
 Y.F. Zheng, X.N. Gu, F. Witte, Biodegradable metals, Materials Science and Engineering R 77 (2014) 1–34.
 Y. P. Zhang, B. Yuan, M. Q. Zeng, C. Y., Chung, X. P. Zhang, High porosity and large pore size shape memory alloys fabricated by using pore-forming agent (NH4HCO3) and capsule-free hot isostatic pressing, Journal of Materials Processing Technology, 192–193 ((2007) 439-442.
 E. D. Spoerke et al. Titanium with aligned, elongated pores for orthopedic tissue engineering applications, In: Journal of Biomedical Materials Research Part A, 84A (2) (2008) 402-412.
 Y. Zhao, M. Taya, Y. Kang, A. Kawasaki, Compression behavior of porous NiTi shape memory alloy, Acta Mater. 53 (2005) 337–343.
 A. Dudek, M. Klimas, Composites based on titanium alloy Ti-6Al-4V with an addition of inert ceramics and bioactive ceramics for medical applications fabricated by spark plasma sintering (SPS method), In: Materialwissenschaft Und Werkstofftechnik, 46 (3) (2015) 237-247.
 W. M. R. M. Daoush, et. al., Microstructural and Mechanical Characterization of Ti-12Mo-6Zr Biomaterials Fabricated by Spark Plasma Sintering, In: Metallurgical and Materials Transactions a-Physical Metallurgy and Materials Science, 46A (3), (2015) 1385-1393.
 M. Fousova, J. Capek, D. Vojtech, Preparation of magnesium-zinc alloy by mechanical alloying, Manufacturing Technology, 14 (3) (2014) 304-309.
 C.Y. Tang, L.N. Zhang, C.T. Wong, K.C. Chan, T.M. Yue, Fabrication and characteristics of porous NiTi shape memory alloy synthesized by microwave sintering, Mater.Sci.Eng. A528 (2011) 6006–6011.
 J.L. Xu et. al. Effect of pore sizes on the microstructure and properties of the biomedical porous NiTi alloys prepared by microwave sintering, Journal of Alloys and Compounds 645 (2015) 137–142.
 P. Novák, et al. Formation of Ni–Ti intermetallics during reactive sintering at 500–650 °C, Materials Chemistry and Physics, 155 (2015) 113-121.
 M. Whitney, S. F. Corbin, R. B. Gorbet, Investigation of the mechanisms of reactive sintering and combustion synthesis of NiTi using differential scanning calorimetry and microstructural analysis, Acta Materialia, 56(3) (2008). 559-570.
 B.Y. Li, L.J. Rong, Y.Y. Li, V.E. Gjunter, Synthesis of porous Ni–Ti shape-memory alloys by self-propagating high-temperature synthesis: reaction mechanism and anisotropy in pore structure ActaMater. 48 (2000) 3895–3904.
 D.T. Pham, S.S. Dimov, Rapid prototyping and rapid tooling--the key enablers for rapid manufacturing, Proc. Instn Mech. Engrs, 217 C: J. Mechanical Engineering Science, (2003) 1-23.
 L.A. Dobrzański, The concept of biologically active microporous engineering materials and composite biological-engineering materials for regenerative medicine and dentistry, Archives of Materials Science and Engineering, 80 (2) (2016) 64-85.
 ***, Overview of additive manufacturing and powder metallurgy processes, Powder metallurgy and additive manufacturing, The Linde Group, www.boconline.co.uk.
 Helena N Chia and Benjamin M Wu, Recent advances in 3D printing of biomaterials, Journal of Biological Engineering 9(4) (2015) 1-14.
 G. Chen, G. A. Wen, P. Cao, N. Edmonds and Y. M. Li, Processing and characterisation of porous NiTi alloy produced by metal injection moulding, Powder Inject. Mould. Int., 2012, 6, (3), 81–86.
 G. Chen, P. Cao, G. Wen, N. Edmonds, Y. Li, Using an agar-based binder to produce porous NiTi alloys by metal injection moulding, Intermetallics 37 (2013) 92–99.
 Randall M. German, Progress in Titanium Metal Powder Injection Molding, Materials 6 (2013), 3641-3662.
 D. Cristea, I. Ghiuţă, D. Munteanu, Tantalum Based Materials for Implants and Prostheses Applications, Bulletin of the Transilvania University of Braşov, 8 (57) No. 2 Series I: Engineering Sciences (2015), 151-158.
 C. Guerra, C. Aguilar et al. Production and characterization of mechanical properties of Ti–Nb–Ta–Mn alloys foams for biomedical applications, Powder Metallurgy 57 (5) (2014) 1-5.
 C.O. Rusănescu, M. Rusănescu, T. Iordănescu, F.V. Anghelina, Mathematical relationships between alloying elements and technological deformability indexes, JOAM, 15 (7-8) (2013) 718-723.
 I. Marek, P. Novák, et. al. Powder Metallurgy Preparation of Co-Based Alloys for Biomedical Applications, ACTA PHYSICA POLONICA A. 128 (4)(2015) 597-601.
 Muziwenhlanhla Arnold Masikane, MscThesis, A Investigation into the microstructure and tensile properties of unalloyed titanium and Ti-6Al-4V alloy produced by powder metallurgy, casting and layered manufacturing, University of the Witwatersrand, Johannesburg 2015.
 L. Reclaru, R.E. Unger, C.J. Kirkpatrick, C. Susz, P.Y. Eschler, M.H. Zuercher, I Antoniac, H Lüthy, Ni–Cr based dental alloys; Ni release, corrosion and biological evaluation, Materials Science and Engineering: C 32 (6), (2012) 1452-1460.
 V.K. Balla, S. Bose, N.M. Davis, A. Bandyapadhyay, Tantalum—A bioactive metal for implants, J. Miner. Met. Mater. Soc. 62 (7) (2005) 61.
. B.R. Levine, S. Sporer, et al., Experimental and clinical performanceof porous tantalum in orthopaedic surgery, Biomaterials 27 (2006) 4671-4681.
 Xue-Nan GU, Yu-Feng ZHENG, A review on magnesium alloys as biodegradable materials, Front. Mater. Sci. China 4(2) (2010) 111–115.
 Zibo Tang, Jialin Niu, Hua Huang, Hua Zhang, Jia Pei, Jingmin Ou, Guangyin Yuan. “Potential biodegradable Zn-Cu binary alloys developed for cardiovascular implant applications”, Journal of the Mechanical Behaviour of Biomedical Materials, 72 (2017) 182-191.
 P. Thomsen, C. Larsson, L. E. Ericson, Structure of The Interface Between Rabbit Cortical Bone And Implants of Gold, Zirconium And Titanium Journal Of Materials Science: Materials In Medicine 8 (1997) 653—665.
 Hussein M.A., C. Suryanarayana, M.K. Arumugam and N. Al-Aqeeli. “Effect of sintering parameters on microstructure, mechanical properties and electrochemical behavior of Nb–Zr alloy for biomedical applications, Materials & Design 83 (2015) 344–351.
 Alison Cowley and Brian Woodward, A Healthy Future: Platinum in Medical Applications, Platinum Metals Rev., 55, (2) (2011) 98–107.
 W. F. Agnew, T. G. H. Yuen, D. B. McCreery and L. A. Bullara, Histopathologic evaluation of prolonged intracortical electrical stimulation Exp. Neurol., 92, (1) (1986) 162.
 M. Geetha, A. K. Singh, R. Asokamani and A. K. Gogia, Ti based biomaterials, the ultimate choice for orthopaedic implants – a review, Prog. Mater. Sci., 2009, 54, 397–425.
 M. Walter, Benefits of PM Processed Cobalt-Based Alloy for Orthopaedic Medical Implants, Carpenter Technology Corp., Wyomissing, PA, USA 2006.
. Yang, H., Li, J., et al.: Structural preparation and biocompatibility evaluation of highly porous Tantalum scaffolds. In: Materials Letters 100 (2013), p. 152-155.
. Nan Li, Yufeng Zheng, Novel Magnesium Alloys Developed for Biomedical Application: A Review, J. Mater. Sci. Technol., 2013, 29(6), 489-502.
. Pavel Salvetr, Pavel Novák, Dalibor Vojtìch, Porous Magnesium Alloys Prepared By Powder Metallurgy, MTAEC9, 50(6) (2016) 917-922.
 Manoj Gupta, Ganesh Kumar Meenashisundaram, Synthesis of Magnesium-Based Biomaterials (Chapter 2), Springer Briefs in Materials Insight into Designing Biocompatible Magnesium Alloys and Composites, pp 17-34, 2015.
 R. Goodall, Porous metals: foams and sponges (Chapter 10), Advances in Powder Metallurgy, Properties, processing and applications, Edited by Isaac Chang and Yuyuan Zhao, Woodhead Publishing Limited, pp. 273-307, 2013.
 Goodall, R., Andreas Mortensen, Porous Metals (Chapter 24), Physical Metallurgy, Vol. III, Edited by David E. Laughlin and Kazuhiro Hono, ISBN: 978-0-444-53770-6, Elsevier Publisher, pp. 2399–2595, 2014.
 M. Qian, G.B. Schaffer, C.J. Bettles, Sintering of titanium and its alloys(Chapter 13), Sintering of Advanced Materials, Woodhead Publishing Series in Metals and Surface Engineering, pp. 324-355, 2010.
 M J Donachie Jr., Titanium-A Technical Guide, 2nd ed., Materials Park, Ohio, ISBN: 978-0-87170-686-7, ASM International Publisher, pp. 46–53, 2000.
 Erhard Klar, Prasan K. Sama, Powder Metallurgy Stainless Steels: Processing, Microstructures, and Properties (Chapter 5), ASM International Publisher, ISBN: 978-0-87170-848-9, 2007.
 F.H. (Sam) Froes, Powder metallurgy of titanium alloys (Chapter 8), Advances in Powder Metallurgy, Properites, processing and applications, Edited by Isaac Chang and Yuyuan Zhao, Woodhead Publishing Limited, (2013) p. 202-240.
 Biomaterials Science-An Introduction to Materials in Medicine, Academic Press, ISBN 0-12-582460-2, 1996.
 M. Bram, T. Ebe and M. Wolff, A.P. Cysne, Applications of powder metallurgy in biomaterials (Chapter 18), Advances In Powder Metallurgy: Properties, Processing And Applications, Woodhead LTD Publisher, 520-554, 2013.
 R.M. German, Powder Injection Molding, Metal Powder Industries Federation, Princeton Publisher, 1990, ISBN 0918404959.
 I. Todd and A. T. Sidambe, Developments in metal injection moulding (MIM) (Chapter 6), Advances in Powder Metallurgy, Properties, processing and applications, Edited by Isaac Chang and Yuyuan Zhao, Woodhead Publishing Limited, pp. 109-146, 2013.