New Cyber-mixmechatronic Concept for the Realization of Smart Cybernetic Systems with Applications in the Industry, Economy and Society

Open access

Abstract

The current scientific work show for the first time, (i) a new complex mixmechatronic concept of integration and fusion in the structures of smart technical and technological systems and (ii) the systems of electronic control for holistic physical-virtual assembly.

The content of the paper highlight some results of professional researches in Mechatronics and Cyber-Mix Mechatronics fields at the National Institute of Research and Development in Mechatronics and Measurement Technique– Bucharest and also at Politehnica University of Bucharest (PUB) from Romania. Some of these results are in the process of transfer and capitalization to the industry, economy and society.

7. REFERENCES

  • [1] Zaharescu, M., Ciurea, M., Kleps, I. şi Dascălu, D: Nanostructuring and Nanocharacterization ISBN 978-973-27-1905-3, 2010, Editura Academiei Române;

  • [2] Fijalkowski, B. T.: Automotive Mechatronics: Operational and Practical Issues, vol.II ISBN 978-94-007-1183-9, Editura Springer-Germania;

  • [3] Saikalis, G. et al.: Virtual Embedded Mechatronics System, SAE Technical Paper, 2006, ISBN: 2006-01-0861;

  • [4] Zhou, K., Ye Cen, Wan J., Liu B. and Liang L.: Advanced Control Technologies in Cyber-physical System, 5th International Conference on Intelligent Human-Machine Systems and Cybernetics (INMSC), Aug. 2013, doi: 10.1109/IHMSC.2013.284.

  • [5] Gheorghe, Gh.: Mecatronica & Sistemele Cyber – Mecatronice, ISBN 978-606-8261-22-5, 2015, Ed. CEFIN – Romania;

  • [6] Gheorghe, Gh (RO), Stiharu, I. (Canada): Nano Ingineria, ISBN: 978-606-8261-16-4, 2011, Ed. CEFIN-România;

  • [7] Rizescu C. I., Ciocan M. and Rizescu D., Robot Control for Home Application, Applied Mechanics and Materials Vol. 332 (2013) pp 145-153, ISSN 16609336, ISBN (978-3-03785-733-5) DOI: 10.4028/www.scientific.net/AMM.332.145

  • [8] Machado, Jose; Soares, Filomena; Leao, Celina P.; et al., A Virtual Workbench Applied to Automation: Student’s Response Analysis, Controlo’2014 – Proceedings of the 11th Portuguese Conference on Automatic Control Vol: 321, Pages 709-719, Published: 2015, Times Cited: 0; DOI:10.1007/978-3-319-10380-8_68;

  • [9] Machado, J.; Campos, J. C.; Sevcik, L; et al., Development of Dependable Controllers in The Context of Machines Design, Modern Methods of Construction Design, Pages:125 - 131, Published: 2014, DOI: 10.1007/978-3-319-05203-8_18;

  • [10] Silva, M.; Pereira, F.; Soares, F.; et al., An Overview of Industrial Communication Network, New Trends in Mechanism and Machine Science from Fundamentals to Industrial Applications, Vol. 24, Pages: 933-940, Published: 2015, DOI:10.1007/978-3-319-09411-3_97;

  • [11] M, Avram; V, Constantin; C. Rizescu: “Speed and position control for a hydraulic rotary motor”, The Romanian Review Precision Mechanics, Optics & Mechatronics, 2014, No. 45, pag. 63-67, ISSN: 1584 – 5982ş

  • [12] O, Donţu, ş.a: “Influence of thermal deformations in the solid laser medium on the emutted radiation parameter”, Journal of Mechanical Engineering, Aug 2005, Vol. 219, No. C8, pag. 823-829;

  • [13] Labo, Edgar; Machado, Jose; Mendacos, Joao, P: Development of Controller Strategies for a Robotized Filament Winding Equipment”, 11th International Conference in Numerical Analyzes and Applied Mathematics, 2013, Pts 1 and 2, Volume: 1558 Pages: 1037-1040, 2013

  • [14] Lee, E. A. Cyber-physical systems design challenges. International Symposium on oriented items/ components/ services distributed using real-time computational technique (ISORC), Orlando, FL, pp. 363-369.

  • [15] Lee, E. A.. Are cyber-physical systems fundamentals of adequate calculus? FSN Workshop on cyber-physical systems: Motivation of research, Techniques and Roadmap, Austin, TX.

  • [16] Lee, E.A.. CPS fundamentals in the Proceedings of Automation Design Conference. (DAC 2010), Association for Computing Machinery, Anaheim, CA, pp. 737-742.

  • [17] Campbell, R.H., Garnett, G. and McGrath, R. E. Cyber-physical systems: CPS position document - environments. Cyber-physical systems, National Science Foundation, Austin, TX. Available at: http://varma.ece.cmu.edu/cps/Position-Papers/Roy-Campbell.pdf.

  • [18] Campbell, J., Goldstein, S. & Mowry T.. Cyber-physical systems, National Science Foundation, Austin, TX. Available at: http://varma.ece.cmu.edu/cps/Position-Papers/Goldstein-Mowry-Campbell.pdf.

  • [19] West, R. & Parmer, G.. A software architecture for next-generation cyber-physical systems. Cyber physical systems, National Science Foundation, Austin, TX. Available at: http://varma.ece.cmu.edu/cps/Position-Papers/richard-west.pdf.

  • [20] Kornerup, J.. 2006. A vision for overcoming the challenges of building cyber-physical systems. Cyber-Physical Systems, National Science Foundation, Austin, TX. Available at: http://varma.ece.cmu.edu/cps/Position-Papers/Jacob-Kornerup.pdf.

  • [21] Rajkumar, R., Lee, I., Sha, ,L. Stankkovic, & J.. Cyber-physical systems: The next revolution calculation of the Design Automation Conference (DAC 2010), Association for Computing Machinery, Anaheim, CA

  • [22] Gheorghe, I. Gh, Mechatronics and Cyber-Mechatronic Systems, ISBN 978-606-8261-22-5, CEFIN Publishing House, 2015;

  • [23] Gheorghe I. Gh, Adaptronica Micro-Engineering, ISBN 978-606-8261-21-8, CEFIN Publishing House, 2014;

  • [24] Gheorghe, I Gh., Mechatronics & Cyber-Mechatronics & Micro-Nano-Mechatronics & Cyber-Micro-Nano-Mechatronics in smart industrial and societal applications, International Conference OPTIROB 2016, June 29–July 2, 2016, Jupiter, Romania, ISI quoted; impact factor: 0,15;

  • [25] Gheorghe, I. Gh., ILIE I., Anghel C-tin, „Scientific Evolution from Mix-Integrative Mechatronics to Smart Cyber-Mechatronics and towards Claytronics, International Conference OPTIROB 2016, June 29 – July 2, 2016, Jupiter, Romania, ISI quoted; impact factor: 0,15;

  • [26] Gheorghe, I. Gh, „From Mechatronics to Cyber-Mechatronics and from μnMechatronics to Claytronics” International Conference - ACME 2016 „Advanced Concepts in Mechanical Engineering”, 09–10 iunie 2016, Iaşi, Romania;

  • [27] Gheorghe, I. Gh, „From Mechatronics to Cyber-Mix-Mechatronics and in the future to Claytonics”, Annual Scientific Session of professors and researchers of University Valahia, June 2, 2016, Târgovişte, România;

  • [28] Spânu, A.R., Donţu, O., Besnea, D., Avram, M., Improvements on Design of Propeller for Chemical Compound Mixer, REVISTA DE CHIMIE, Volume 66, Issue 3, pp. 422-425, ISSN 0034-7752, 2015 (ISI Web of Science, IF=0,810);

  • [29] Spânu, A.R., Besnea, D., Avram, M., Constantin, V., “Laser mechatronic system used for accurate measurement of spatial shapes”, Optoelectronics and Advanced Materials - Rapid Communications, Volume 8, Issue 1-2, pp.1-6, ISSN 1842-6573, 2014 (ISI Web of Science, SCOPUS, IF=0,394);

  • [30] Nitu, C., Nitu, S., Gramescu, B., “Application of Electromagnetic Actuators to a Variable Distribution System for Automobile Engines”, Journal of Materials Processing Technology, vol. 161/1-2, 200, 5pag. 253-257, Elsevier, ISSN 0924-0136 (ISI Web of Science -WOS:000229375200046) - impact factor 2.236 – 8 citations;

  • [31] Nitu, C., Nitu, S., “An Improved Analytical Model for Electromagnetic Actuators Design”, in “Elektronika” nr.8-9/2004, pag.47-49, ISSN 0033-2089, Varsovia (INSPEC);

  • [32] Nitu, C., Comeaga, C.D., Gramescu, B., “Micropositioning devices for optical applications”, Proceedings of SPIE, nr. 5227, pag. 355-360, 2002 (Web of Science WOS:000186473500050);

  • [33] Lemos, D.; Nunes, A.; Machado, J., “Mechanical simulation model of the systemic circulation”; et al., Source: Measurement Volume: 66 Pages: 212-221 Published: APR 2015 Times Cited: 0, DOI: 10.1016/j.measurement.2015.01.026;

  • [34] Barros, Carla; Leao, Celina Pinto; Soares, Filomena, “QR Codes and Java Applied to Physiological Data Acquisition in Biomedical Engineering Education”, Source: Proceedings of the International Conference of Numerical Analysis and Applied Mathematics 2014 (Icnaam-2014) Volume: 1648 Published: 2015 Times Cited: 0, DOI: 10.1063/1.4912855;

  • [35] Rizescu C. I., Ciocan M. and Rizescu D., “Robot Control for Home Application”, Applied Mechanics and Materials Vol. 332 (2013) pp 145-153, ISSN 16609336, ISBN (978-3-03785-733-5), DOI: 10.4028/www.scientific.net/AMM.332.145;

  • [36] Rizescu, C.I., Udrea, C. Rizescu, D., “Experimental Setup for Harmonic Drive Efficiency Determination”, Advanced Materials Research Vols. 463-464 (2012) pp. 1518-1521, ISSN 10226680, ISBN 978-303785363-4, Accession Number: WOS: 000308114100299, Inspec Accession No.: 13066151, DOI: 10.4028/www.scientific.net/AMR.463-464.1518.

Journal Information

Metrics

All Time Past Year Past 30 Days
Abstract Views 0 0 0
Full Text Views 9 9 9
PDF Downloads 1 1 1