Sewing Thread Consumption for Chain Stitches of Class 400 Using Geometrical and Multilinear Regression Models

Open access


This work deals with determination of rapid and precise methods to predict the amount of sewing thread needed to sew a garment using different chain stitches of the class 400 (from 401 to 407 chain stitches). At first, to avoid unused stocks, sewing consumption value was determined using a geometrical method (based on different chain stitch shapes). The prediction of the sewing thread consumption was proposed as a function of the studied input parameters, which are fabric thickness, stitch density, yarn linear density, and stitch width. Then, a statistical method based on the multilinear regression was studied. Geometrical and statistical results were discussed. Based on the R2 range, we concluded that the geometrical method is more accurate than the statistical one (from 98.16 to 99.19% and from 97.30 to 98.51%, respectively). Thus, this result encourages industrialists to use geometrical models to predict thread consumption.

Also, all studied parameters, contributing to the sewing thread consumption behavior, were investigated and analyzed. The result shows that the most important parameters affecting thread consumption are stitch density followed by stitch width and fabric thickness. The yarn density has a low contribution on the thread consumption value.

If the inline PDF is not rendering correctly, you can download the PDF file here.

  • [1] Rasheed A. Ahmad S. Ali N. Rehman A. Ramzan M.B. (2018). Geometrical model to calculate the consumption of sewing thread for 504 over-edge stitch. The Journal of the Textile Institute 2018; doi:10.1080/00405000.2018.1423902.

  • [2] Doustar K. Najar S. S. Maroufi M. (2010). The effect of fabric design and weft density on bagging behavior of cotton woven fabrics. The Journal of the Textile Institute 101 135-142.

  • [3] Jaouachi B. Aouine S. Khedher F. (2017). Consumed sewing thread behaviour based on Lockstitch and chain stitch. Indian Journal of Fibre & Textile Research 42 325-334.

  • [4] Khedher F. Jaouachi B. (2014). Waste factor evaluation using theoretical and experimental jean pants consumptions. The Journal of the Textile Institute 106 402-408.

  • [5] Jana P. (2011). Assembling technologies for functional garments—An overview. Indian Journal of Fibre & Textile Research 36 380-387.

  • [6] Rasheed A. Ahmad S. Mohsin M. Ahmad F. Ali Afzal M. (2014). Geometrical model to calculate the consumption of sewing thread for 301 Lockstitch. Journal of Fibre & Textile Research 105 1259-1264.

  • [7] Webster J. Laing R. M. Niven B. E. (1998). Effects of repeated extension and recovery on selected physical properties of ISO-301 stitched seams part I: load at maximum extension and at break. Textile Research Journal 68(11) 854-864.

  • [8] Lauriol A. (1999). Modes and techniques: Initiation to the technology of materials in the clothing industries. 2nd ed. France: Strasbourg.

  • [9] Sharma S. Gupta V. Midha V. K. (2017). Predicting sewing thread consumption for chain stitch using regression model. Journal of Textile Science and Engineering 7 ISSN 2165-8064.

  • [10] Vinay K. M. Shailja S. Vaibhav G. (2016). Predicting sewing thread consumption for lockstitch using regression model. Research Journal of Textile and Apparel 20 155-163.

  • [11] Jaouachi B. Khedher F. (2015). Evaluation of sewed thread consumption of jean trousers using neural network and regression methods. Fibres & Textiles in Eastern Europe 111 91-96.

  • [12] Jaouachi B. Khedher F. (2013). Evaluating sewing thread consumption of jean pants using fuzzy and regression methods. The Journal of the Textile Institute 104 1065-1070.

  • [13] Ghosh S. Chavhan Md. V. (2014). A geometrical model of stitch length for lockstitch seam. Indian Journal of Fibre and Textile Research 39(2) 153-156.

  • [14] Jaouadi M. Msahli S. Babay A. Zitouni B. (2006). Analysis of the modeling methodologies for predicting the sewing thread consumption. International Journal of Clothing Science and Technology 18 7-18.

  • [15] Midha V. K. Sharma S. Gupta V. (2016). Predicting sewing thread consumption for lockstitch using regression model. Research Journal of Textile and Apparel 20(3) 155-163.

  • [16] Gazzeh M. Khedher F. Jaouachi B. (2017). Modelling the sewing thread consumption of 602 cover-stitch based on its geometrical shape. International Journal of Applied Research on Textile 5 1-15.

  • [17] NFG 07-117. (1981). Method of assessing of fabric threads slippage and measurement of the seam resistance. French Association for Standardization AFNOR. 201-209.

  • [18] Md Sohanur Rahman Sobuj. (2015). Relation between yarn count and diameter & count calculation for ply yarn. Web site: (27 February 2015).

  • [19] Gazzeh M. (2015). Study of the effect of wire/wire friction on the behavior of Denim tissue poaching. PhD thesis in Textile Engineering University of Monastir. Tunisia.

  • [20] Jaouachi B. Khedher F. Mili F. (2012). Consumption of the sewing thread of jean pant using Taguchi design analysis. Autex Research Journal 12 81-86.

  • [21] Goldnfiber. (2018). Major factors for doing sewing thread consumption. Web site:

Journal information
Impact Factor

IMPACT FACTOR 2018: 0.927
5-year IMPACT FACTOR: 1.016

CiteScore 2018: 1.21

SCImago Journal Rank (SJR) 2018: 0.395
Source Normalized Impact per Paper (SNIP) 2018: 1.044

All Time Past Year Past 30 Days
Abstract Views 0 0 0
Full Text Views 25 25 7
PDF Downloads 26 26 9