Use of Taguchi Method and Grey Relational Analysis to Optimize Multiple Yarn Characteristics in Open-End Rotor Spinning

Open access

Abstract

Rotor speed and twist per metres (tpm) are two key parameters in open-end rotor spinning of cotton yarns. High spinning productivity can be obtained by keeping the rotor speed high and twist level as low as possible. However, too high rotor speed may result in yarn imperfections and too low twist level may result in lower tenacity yarns. This study aimed at optimising the multiple yarn characteristics in open-end rotor spinning using the Taguchi method and the grey relational analysis. Cotton yarn samples of 30 tex were produced on rotor spinning machine with different twist levels (i.e. 500, 550, 600 and 700 tpm) at different rotor speeds (i.e. 70,000, 80,000, 90,000 and 100,000 rpm) according to the Taguchi design of experiment. Optimal spinning process parameters were determined using the grey relational grade as the performance index. It was concluded that for the cotton fibres and yarn count used in this study, optimum properties of the yarns could be obtained at 90,000 rpm rotor speed and 700 tpm.

If the inline PDF is not rendering correctly, you can download the PDF file here.

  • [1] Padamanabhan A.R.: A Comparative Study of the Properties of Cotton Yarns Spun on the DREF-3 and Ring- and Rotor-spinning Systems Journal of Textile Institute Vol. 80 No. 4 p. 555-562 1989.

  • [2] Ozipek B.: International Textile Workshop December 2003 Textile Engineering Department Istanbul Technical University Istanbul-Turkey.

  • [3] Jackowski T.; Chylewska B.; and Cyniak D.: Influence of spinning process parameters on strength characteristics of cotton yarn Fibers & Textiles in Eastern Europe V. p.27-31 July/September 2002.

  • [4] Lord P. R.; and Grady P. L.: The Twist Structure of Open-end Yarns Textile Research Journal V. p. 123 1976.

  • [5] Lawrence C. A.; and Finikopulos E.: Factor Effecting Changes in the Structure and Properties of Open-end Rotor Yarns Indian Journal of Fibres &Textile Research V.17 p. 201 - 208 Dec. 1992.

  • [6] Lord P.R.; Muhammad M. H.; and Ajgaonkar.: The performance of Open –End Twist less and ring Yarns in Weft knitted fabrics Textile Research Journal V.44 p.405-414 1974.

  • [7] Candan C.; Nergis U. B.; and Iridag Y.: Performance of Open-End spun yarns in weft knitted fabrics Textile Research Journal V. 70 p. 177-181 2000.

  • [8] Koc E.; Carl A. L.; and Cherian I.: Wrapper fibers in Open-end rotor spun yarns: Yarn Properties and Wrapper Fibers Fibers& Textiles in Eastern Europe V. 13 No. 2(50) p. 8-15 April/June 2005.

  • [9] Haung X.; and Zhu R.: Tensile behavior of rotor spun yarn Journal of China Textile University (Eng-Ed) V. 7 No.1 p.13-22 1990.

  • [10] Gnanasekar K.; Chellamani P.; and Karthikeyan. S.: Influence of rotor speed in open–end spinning on yarn quality Indian Journal of Fiber & Textile Research V. 15 p. 164-168 December 1990.

  • [11] Salhotra R. K.; and Balasubramanian P.: An approach to the optimization of Rotor-Spinning machine parameters Journal of Textile Institute V. 77 No.2 p.128-138 1986.

  • [12] Tao X. M.; Lo W. K.; and Lau Y. M.: Torque - balanced singles knitting yarns by unconventional systems. Part I: Cotton rotor spun yarn Textile Research Journal V. 67 p. 739–746 1997.

  • [13] Sherma I. C.; Gupta N. K.; Agrawal B. R.; and Ataik N. R.: Effect of twist factor and stitch length of open-end spun cotton yarn on properties of rib knitted fabric Textile Research Journal V.55 p. 73-81 1987.

  • [14] Xu D.: Research on Improving the Quality of Rotor Spinning Yarn” Progress in Text Science & Technology V. p. 6-13 2010.

  • [15] Kumar A. Ishtiaque S. M. and Salhotra K. R.: Analysis of spinning process using the Taguchi method. Part IV: Effect of spinning process variables on tensile properties of ring rotor and air-jet yarns Journal of Textile Institute. V. 97 p. 38 2006

  • [16] Kumar A. Ishtiaque S. M. and Salhotra K. R.: Analysis of spinning process using the Taguchi method. Part III: Effect of spinning process variables on migration parameters of ring rotor and air-jet yarn Journal of Textile Institute V. 97 p. 377 2006.

  • [17] Su T. L. Chen H. W. Ma C. M and Lu C. F.: Improving the Quality of Combed Yarn Spun by OE Rotor Spinning Using the Grey-Taguchi Method Fibers & Textiles in Eastern Europe. V. 19 P. 23 (2011).

  • [18] H. Hasani S. A. Tabatabaei and G. Amiri.: Grey Relational Analysis to Determine the Optimum Process Parameters for Open-End Spinning Yarns J. Eng. Fibers and Fabrics V. 7 P. 81 (2012).

  • [19] J. Deng.: Introduction to Grey System Theory J. Grey System V. 1 P. 1 (1989).

  • [20] S. Liu.: The Current Developing Status on Grey System Theory J. Grey System V. 2 P. 111 (2007).

Search
Journal information
Impact Factor


IMPACT FACTOR 2018: 0.927
5-year IMPACT FACTOR: 1.016

CiteScore 2018: 1.21

SCImago Journal Rank (SJR) 2018: 0.395
Source Normalized Impact per Paper (SNIP) 2018: 1.044

Cited By
Metrics
All Time Past Year Past 30 Days
Abstract Views 0 0 0
Full Text Views 444 262 2
PDF Downloads 248 159 4