The aim of this study was to investigate the effect of knitting parameters on the moisture management and air
permeability of the interlock fabrics. Samples were produced at two different knitting gauges, each with three
different stitch lengths. It was found that the fabric mass per square metre increases by increasing machine gauge
and decreasing the stitch length, whereas the fabric thickness and porosity increase at these settings. It was further
concluded that the loosely knitted fabric samples with higher amount of entrapped air exhibit good air permeability
but poor moisture management properties.
 Onofrei E. Rocha A. M. and Catarino A. (2011). The
influence of knitted fabrics’ structure on the thermal and
moisture management properties. Journal of Engineered
Fibers and Fabrics 6(4) 10-22.
 Nida O. and Arzu M. (2007). Thermal comfort properties
of some knitted structures. Fibres and textiles in Eastern
Europe 15(5) 94-96.
 Li Y. and Zhu Q. (2003). Simultaneous heat and moisture
transfer with moisture sorption condensation and capillary
liquid diffusion in porous textiles. Textile Research Journal
 Chidambaram P. Govind R. and Venkataraman K. C.
(2011). The effect of loop length and yarn linear density on
the thermal properties of bamboo knitted fabric. AUTEX
Research Journal 11(4) 102-105.
 Kane C. Patil U. and Sudhakar P. (2007). Studies on
the influence of knit structure and stitch length on ring
and compact yarn single jersey fabric properties. Textile
Research Journal 77(8) 572-582.
 Ibrahim N. Khalifa T. El-Hossamy M. and Tawfik T.
(2010). Effect of knit structure and finishing treatments on
functional and comfort properties of cotton knitted fabrics.
Journal of Industrial Textiles 40(1) 49-64.
 Bivainyte A. Mikucioniene D. and Kerpauskas P. (2012).
Investigation on thermal properties of double-layered weft
knitted fabrics. Materials Science 18(2) 167-171.
 Anand S. C. (2003) Sportswear fabrics. Knitting
 Petrulyte S. and Baltakyte R. (2008). Investigation into
the wetting phenomenon of terry fabrics. Fibres & Textiles
in Eastern Europe 16(4) 62-66.
 Mikucioniene D. Ciukas R. and Mickeviciene A. (2010).
The influence of knitting structure on mechanical properties
of weft knitted fabrics. Materials Science 16(3) 221-225.
 Charalambus A. (2007). New approach to a theoretical
study of some of the parameters in the knitting process
and their influence on knit-fabric stitch density. AUTEX
Research Journal 7(2) 95-99.
 Singh G. Roy K. Varshney R. and Goyal A. (2011).
Dimensional parameters of single jersey cotton knitted
fabrics. Indian Journal of Fibre and Textile Research
 AATCC. (2012). AATCC Test Method 195-2011; Liquid
Moisture Management Properties of Textile Fabrics.
AATCC Technical Manual 87 366-370.
 Tugrul O. R. and Serin M. M. (2011). Optimization of air
permeability of knitted fabrics with the Taguchi approach.
The Journal of the Textile Institute 102(5) 395-404.
 Ogulata R. T. and Mavruz S. (2010). Investigation of
porosity and air permeability values of plain knitted fabrics.
Fibres & Textiles in Eastern Europe 18(5) 82-90.