The paper presents the possibilities of additive manufacturing of the selected alloy, Inconel, for production of ready-made elements. The results of surface topography examination of the material manufactured with the use of the device 557 RPMI working in the LDT technology (LDT = Laser Deposition Technology) have been compared to those of thecold drawn material. The surfacejust after manufacturing inthese two technologies has been compared to the one after machining by means of variable machining parameters. The surface roughness parameter, Sskis positive for all the surfaces of thesamplemade by the traditional technology, regardless of the feed. This means that most of the material is located close to the valleys. The surfaces are characterised by right-hand side asymmetry. In all the surfaces of the sample made by the additive technology, regardless of the feed value, the surface roughness parameter, Ssk, is negative, which means that most of the material is located close to the peaks.
If the inline PDF is not rendering correctly, you can download the PDF file here.
 Franco L. A. SinatoraA.3D surface parameters (ISO 25178-2): Actual meaning of Spk and its relationship to Vmp Precision Engineering 40(2015) 106-111.
 Grobelny P. Furmanski L. Legutko S. Investigations of Surface Topography of Hot Working Tool Steel Manufactured with theUse of 3D Print 13thInternational Conference Modern Technologies in Manufacturing MTeM 2017 -AMATUC Cluj-Napoca Romania 12-13 October 2017;MATEC Web of Conferences vol. 137 02004 (2017) pages 6 doi:
 Grobelny P., Furmanski L., Legutko S., Investigations of Surface Topography of Hot Working Tool Steel Manufactured with theUse of 3D Print, 13thInternational Conference Modern Technologies in Manufacturing MTeM 2017 -AMATUC, Cluj-Napoca, Romania, 12-13 October 2017;MATEC Web of Conferences, vol. 137, 02004 (2017), pages 6, doi: 10.1051/matecconf/201713702004.)| false
 Krolczyk G. M. Legutko S. Analysis by measurement of surface roughness variations in turning process of duplex stainless steel Metrology and Measurement Systems 21 (4) (2014) 759-770.
 Nieslony P. Krolczyk G. M. Wojciechowski S. Chudy R. Zak K. Maruda R. W.Surface quality and topographic inspection of variable compliance part after precise turning Applied Surface Science 435 (2018) 91-101.
 Ciurana J. Hernandez L. Delgado J.Energy density analysis on single tracks formed by selective laser melting with CoCrMo powder material The International Journal of Advanced Manufacturing Technology 680(5-8) (2013)1103-1110.
 Kreitcberg A. Brailovski V. Turenne S.Elevated temperaturemechanical behavior of IN625 alloy processed by laser powder-bed fusion Materials Science and Engineering: A 700 (2017) 540-553.
 Deng P. Yao C. Feng K. Huang X. Li Z. Li Y. Zhao H.Enhanced wear resistance of laser cladded graphene nanoplatelets reinforced Inconel 625 superalloy composite coating Surface and Coatings Technology 335 (2018) 334-344.
 Kreitcberg A. Brailovski V. Turenne S.Effect of heat treatment and hot isostatic pressing on the microstructure and mechanical properties of Inconel 625 alloy processed by laser powder bed fusion Materials Science and Engineering: A 689 (2017) 1-10.
 Wang P. Zhang B. Tan C. C. Raghavan S. Lim Y-F. Sun C-N. Wei J. Chi D.Microstructural characteristics and mechanical properties of carbon nanotube reinforced Inconel 625 parts fabricated by selective laser melting Materials & Design 112 (2016) 290-299.
 Xu X. Mi G. Xiong L. Jiang P. Shao X. Wang C.Morphologies microstructures and properties of TiC particle reinforced Inconel 625 coatings obtained by laser cladding with wire Journal of Alloys and Compounds 740 (2018) 16-27.
 Zhang F. Levine L. E. Allen A. J. Campbell C. E. Lass E. A.Cheruvathur S. Stoudt M. R. Williams M. E. Idell Y.Homogenization kinetics of a nickel-based superalloy produced by powder bed fusion laser sintering ScriptaMaterialia 131 (2017) 98-102.
 Koutiri I. Pessard E. Peyre P. Amlou O. De Terris T.Influence of SLM process parameters on the surface finish porosity rate and fatigue behavior of as-builtInconel 625 parts Journal of Materials Processing Technology 225 (2017) 536-546.
 Czarnecki H.Analiza teoretyczna wpływu stereometrii powierzchni na działanie pary tribologicznej Tribologia 4 (2005) 19-31.
 W. M. Daca J.Rudnicki Z.Analiza wpływu topografii powierzchni na przebieg zjawisk tribologicznych Materiały XXI Sympozjonu PKM (2003) 213-218.
 Łunarski J.Tribotechnologia i jej relacje z tribologią Tribologia 2 (2009) 71-80.
 Thomas T.R.Rough Surfaces London Imperial College Press 1999.
 Michalski A. Sokolowska A. Legutko S.The useful properties of TINx-TI coatings deposited onto drills at 500 K using the reactive pulse plasma method Thin Solid Films 129 (3-4) (1985) 249-254.
 Krolczyk G. Legutko S. Stoic A. Influenceof cutting parameters and conditions onto surface hardness of duplex stainless steel after turning process TehnickiVjesnik-Technical Gazette 20 (6) (2013) 1077-1080.
 Twardowski P. Legutko S. Krolczyk G. et al. Investigation of wear and tool life of coated carbide and cubic boron nitride cutting tools in high speed milling Advances in Mechanical Engineering 7 (6) (2015) 1-9.
 Legutko S. Development trends in machines operation maintenanceEksloatacjaiNiezawodnosc-Maintenance and Reliability 2 (42) (2009) 8-16.