Numerical and experimental analyses of non-energy absorbing lighting poles

Tomasz Ireneusz Jedliński 1 , Jacek Buśkiewicz 2  and Paweł Fritzkowski 2
  • 1 Research and Development Manager, Europoles sp. z o. o., Kasztelańska 39, 62-571, Krągola, Poland
  • 2 Faculty of Mechanical Engineering and Management, Poznań University of Technology, Piotrowo 3, 60-965, Poznań, Poland


Apart from the strength requirements, modern lighting pole designs have to meet a number of safety requirements in the event of collisions. The paper compares the experimental tests performed at the collision test track according to EN 12767 with the results of the numerical analysis carried out in Ansys LS-DYNA. The objective of the work is to prepare a new structure of a thin-walled lighting pole of steel which minimizes absorption of the kinetic energy of the vehicle and, simultaneously, its production costs are comparable to those of a standard pole. The tests were carried out at an impact speed of 100 km/h.

If the inline PDF is not rendering correctly, you can download the PDF file here.

  • [1] G. Janszen.,Vehicle crash test against a lighting pole: experimental analysis and numerical simulation in Safety and Security Engineering II 347(WIT Press, 2007).

  • [2] J. A. Vilan, A. Segade and C. Casqueiro.,Development and testing of a non-energy-absorbing anchorage system for roadside poles, International Journal of Crashworthiness, 11:2, 2006, 143-152, doi:

    • Crossref
    • Export Citation
  • [3] European Committee for Standardization (CEN)., European Standard EN 12767, Passive Safety of Supportfor Road Equipment -Requirements and Test Methods, Warsaw, 2009.

  • [4] European Committee for Standardization (CEN)., European Standard EN 1317-1, Road restraint systems. Terminology and general criteria for test methods, Warsaw, 2010.

  • [5] European Committee for Standardization (CEN).,European Standard EN ISO 6892-1, Metallic materials --Tensile testing --Part 1: Method of test at room temperature, Warsaw, 2010.

  • [6] S. Rudnik.,Metallography, PWN, Warsaw, 1996.

  • [7] J. U. Hartig, S Facchini, P. Haller., Investigation on lateral vehicle impact on moulded wooden tubes made of beech, Construction and Building Materials 174 (2018)547 -588.


Journal + Issues