Multi-scale curvature tensor analysis of machined surfaces

Open access


This paper demonstrates the use of multi-scale curvature analysis, an areal new surface characterization technique for better understanding topographies, for analyzing surfaces created by conventional machining and grinding. Curvature, like slope and area, changes with scale of observation, or calculation, on irregular surfaces, therefore it can be used for multi-scale geometric analysis. Curvatures on a surface should be indicative of topographically dependent behavior of a surface and curvatures are, in turn, influenced by the processing and use of the surface. Curvatures have not been well characterized previously. Curvature has been used for calculations in contact mechanics and for the evaluation of cutting edges. In the current work two parts were machined and then one of them was ground. The surface topographies were measured with a scanning laser confocal microscope. Plots of curvatures as a function of position and scale are presented, and the means and standard deviations of principal curvatures are plotted as a function of scale. Statistical analyses show the relations between curvature and these two manufacturing processes at multiple scales.

If the inline PDF is not rendering correctly, you can download the PDF file here.

  • [1] Bartkowiak T. Hyde J. Brown C. A. Multi-scale curvature tensor analysis of surfaces created by micro-EDM and functional correlations with discharge energy 5th International Conference on Surface Metrology At Poznan University of Technology Poznan Poland 2016.

  • [2] Bartkowiak T. Lehner J. T. Hyde J. Wang Z. Pedersen D. B. Hansen H. N. Brown C. A. Multi-scale areal curvature analysis of fused deposition surfaces Conference: ASPE Spring Topical Meeting on Achieving Precision Tolerances in Additive Manufacturing At Raleigh North Carolina USA 2015 pp 77-82.

  • [3] Berglund J. Brown C. A. Rosen B.-G.Bay N. Milled die steel surface roughness correlation with steel sheet friction CIRP Ann.-Manuf. Technol. 2010 vol. 59 pp. 577-580.

  • [4] Boulanger J. The ―Motifs‖ method: An interesting complement to ISO parameters for some functional problems International Journal of Machine Tools and Manufacture 1992 vol. 32 nr 1 pp. 203-209. a) b)

  • [5] Brown C. A. Siegmann S. Fundamental scales of adhesion and area-scale fractal analysis Int. J. Mach. Tools Manuf. 2001 vol. 41 pp. 1927-1933.

  • [6] Cantor G.J. Brown C. A. Scale-based correlations of relative areas with fracture of chocolate Wear 2009 vol. 266 pp. 609-612.

  • [7] Goldfeather J. Interrante V. A novel cubic-order algorithm for approximation principal directions vectors ACM Transactions on Graphics 2004 vol. 23 nr 1 pp. 45-63.

  • [8] Lou S. Jiang X. Scott P. J. Correlating motif analysis and morphological filters for surface texture analysis Measurement 2013 vol. 46 nr 2 pp. 993-1001.

  • [9] Theisel H. Rossi C. Zayer R. Seidel H.-P. Normal based estimation of the curvature tensor for triangular meshes Computer Graphics and Applications 2004. PG 2004.Proceedings. 12th Pacific Conference on Computer Graphics and Applications 6-8 Oct. 2004 pp. 288-297.

  • [10] Vulliez M. Gleason M.A. Souto-Lebel A. Quinsat Y. Lartigue C. Kordell S.P. Lemoine A.C. and Brown C.A. Multi-scale curvature analysis and correlations with the fatigue limit on steel surfaces after milling Procedia CIRP 2014 vol. 13 pp. 308-313.

  • [11] Weingarten J. (1861) "Ueber eine Klasse auf einander abwickelbarer Fläachen". Journal für die Reine und Angewandte Mathematik 1861 vol. 59 pp. 382-393.

  • [12] Zeng Y. Wang K. Mello B. C. Wang Z. Brown C. A. Multi-Scale Evaluations of the Roughness of Surfaces made by Additive Manufacturing ASPE Abstract: 3953 2014 ASPE Spring Topical Meeting Dimensional Accuracy and Surface Finish in Additive Manufacturing April 13-16 2014 University of California - Berkeley.

  • [13] ASME B46.1-2009 Surface Texture (Surface Roughness Waviness and Lay) (New York: American Society of Mechanical Engineers)

Journal information
Cited By
All Time Past Year Past 30 Days
Abstract Views 0 0 0
Full Text Views 189 49 3
PDF Downloads 111 50 3