The Role of Focus Position in Single Pulse Laser Drilling of Highly Reflecting Materials

Open access

Abstract

The laser processing of materials which are highly reflective at laser wavelengths is problematic. We have to take into account that only a small part of the energy is absorbed, the main part being reflected. In this article we examine the laser processing of highly reflective copper and silver at 1070 nm wavelength. In laser drilling of printed circuit boards it is necessary to drill copper layer as well. In highly reflecting materials we can drill smaller holes because of the low energy efficiency. Naturally in single pulse laser drilling the focus position plays a key role: at the focal spot of the laser beam smaller diameter holes are produced, further from the focal spot, higher diameter holes are produced.

If the inline PDF is not rendering correctly, you can download the PDF file here.

  • [1] Buza G.: Lézersugaras technológiák II. Edutus Főiskola Budapest 2012. 79.

  • [2] Kurosawa M.: Laser drilling high-density printed circuit boards. (accessed on: 2019. 05. 28.) https://www.industrial-lasers.com/drilling/article/16485325/laser-drilling-highdensityprinted-circuit-boards

  • [3] Xiaodong N.: Laser Welding. Published by Sciyo Janeza Trdine 9 51000 Rijeka Croatia 2010. 54.

  • [4] Meszlényi Gy. Bitay E.: Az egyimpulzusos lézersugaras fúrás folyamatának elemzése. Bányászati és kohászati lapok Kohászat 151/5–6. (2018) 40–44.

  • [5] Paripás B. Szabó Sz. Kocsisné Baán M. Tolvaj Béláné Bencs P.: Lézeres mérési- és megmunkálási eljárások a gépészetben. Miskolci Egyetem Miskolc 2009. 66.

  • [6] Alexander F. H. K.: Theoretical analysis of laser beam cutting. Shaker Verlag Aachen 2002. 14.

  • [7] Puskás Zs.: Lézeres mikromegmunkálás szállézerel. (accessed on: 2019. 04. 17.) http://docplayer.hu/720391-Lezeres-mikromegmunkalas-szallezerrel.html

  • [8] Kreisz I.: Lézersugár-vezetés. Edutus Főiskola Budapest 2011. 82.

  • [9] Duley W.: Laser welding 1. edition. Wiley-Interscience 1998. 69.

  • [10] Ready J. F. Farson D.: LIA Handbook of Laser Materials Processing. Laser Institute of America Magnolia Publishing Inc. 2001. 182.

  • [11] Naeem M.: Laser processing of reflective materials. (accessed: 2019. 05. 28.) https://onlinelibrary.wiley.com/doi/epdf/10.1002/latj.201390001

  • [12] Tradowsky K.: A LASER ABC-je. Műszaki Könyvkiadó Budapest 1971. 99–100.

  • [13] Stephen A.: Laser micro drilling methods for perforation of aircraft suction surfaces. Elsevier Science Direct Procedia CIRP 74 2018. 404. https://doi.org/10.1016/j.procir.2018.08.157

Search
Journal information
Metrics
All Time Past Year Past 30 Days
Abstract Views 0 0 0
Full Text Views 24 24 6
PDF Downloads 16 16 4