Investigations on Wear Mechanisms of PVD Coatings on Carbides and Sialons

Open access

Abstract

The paper presents the results on the wear resistance of PVD coatings on cutting inserts made from sintered carbide and sialon ceramics. The exploitative properties of coatings in technological cutting trials were defined in the paper, which also examined the adhesion of coatings to the substrate, the thickness of the coating, and the microhardness. As a result, it was found that isomorphic coating with AlN-h phase of covalent interatomic bonds exhibits much better adhesion to the sialon substrate than isomorphic coating with titanium nitride TiN. These coatings assure the high wear resistance of the coated tools, and the high adhesion combined with the high microhardness and fine-grained structure assure an increase in the exploitative life of the coated tools. In the case of coatings on substrate made from sintered carbide, there was a significant influence on the properties of the tools coated with them as concerns the existence of the diffusion zone between the substrate and the coating.

[1] L.A. Dobrzański, Engineering materials and materials designing. Fundamentals of materials science and metallurgy. Gliwice-Warsaw, WNT. (2006).

[2] S. Ekinović, Obrada rezanjem. Zenica, BiH. (2001).

[3] M. Staszuk, D. Pakuła, T. Tański, Mater. Tehnol. 50 (5), 755-759 (2016).

[4] M. Basiaga, W. Walke, M. Staszuk, W. Kajzer, A. Kajzer, K. Nowińska, Arch. Civ. Mech. Eng. 17, 32-42 (2017).

[5] L.A. Dobrzański, D. Pakuła, Mater. Sci. Forum 513, 119-133 (2006).

[6] L.A. Dobrzański, K. Gołombek, Journal of Materials Processing Technology 164, 2005, 805-810.

[7] T. Liu, C. Dong, S. Wu, K. Tang, J. Wang, J. Jia, Surf. Coat. Tech. 201, 6737-6741 (2007).

[8] M. Bonek, A. Śliwa, J. Mikuła, Appl. Surf. Sci. 388, 174-179 (2016)

[9] A. Śliwa, W. Kwaśny, M. Sroka, R. Dziwis, Metalurgija 56, 422-424 (2017)

[10] M. Krupiński, B. Krupińska, K. Labisz, Z. Rdzawski, W. Borek, J. Therm. Anal. Calorim. 118/2, 1361-1367 (2014).

[11] A. Zieliński, G. Golański, M. Sroka, Mat. Sci. Eng. A 682, 664-672 (2017).

[12] A. Drygała, L.A. Dobrzański, M. Szindler, M.M. Szindler, M. Prokopiuk vel Prokopowicz, E. Jonda, Int. J. Hydrogen. Energ. 41 (18), 2016, 7563-7567.

[13] Y. Birol, B. Yuksel, Surf. Coat. Tech. 207, 461-466 (2012).

[14] G.G. Fuentes, E. Almandoz, R. Pierrugues, R. Martínez, R.J. Rodríguez, J. Caro, M. Vilaseca, Surf. Coat. Tech. 205, 1368-1373 (2010).

[15] M. Pancielejko, W. Precht, J. Mater. Process Tech. 157-158, 394-298 (2004).

[16] A. Czyżniewski, W. Gulbiński, G. Radnóczi, M. Szerencsi, M. Pancielejko, Surf. Coat. Tech. 205, 4471-4479 (2011).

[17] J.A. Thornton, Journal of Vacuum Science and Technology A4 (6), 3059-3065 (1986).

[18] M. Odén, J. Almer, G. Hakansson, M. Olsson, Thin Solid Films 377-378, 407-412 (2000).

[19] E. Broszeit, C. Friedrich, G. Berg, Surf. Coat. Techn. 115, 9-16 (1999).

[20] P. Bílek, P. Jurči, M. Hudáková, M. Pašák, M. Kusý, J. Bohovičová, Appl. Surf. Sci. 307, 13-19 (2014).

[21] E. Torres, D. Ugues, Z. Brytan, M. Perucca, J. Phys. D. Appl. Phys. 42 (10), (2009).

[22] G.-an. Cheng, D.-yan. Han, C.-lin. Liang, X.-ling. Wu, R.-ting. Zheng, Surf. Coat. Tech. 228, S328-S330 (2013).

[23] H. Shang, J. Li, T. Shao, Appl. Surf. Sci. 310, 317-320 (2014).

[24] J. Zhang, H. Yang, Q.-long. Zhang, S. Dong, J.K. Luo, Appl. Surf. Sci. 282, 390-395 (2013).

[25] V. Subramanian, T. Bakhishev, D. Redinger, S.K. Volkman, J. Disp. Technol. 5/12 525-530 (2009).

Archives of Metallurgy and Materials

The Journal of Institute of Metallurgy and Materials Science and Commitee on Metallurgy of Polish Academy of Sciences

Journal Information


IMPACT FACTOR 2016: 0.571
5-year IMPACT FACTOR: 0.776

CiteScore 2016: 0.85

SCImago Journal Rank (SJR) 2016: 0.347
Source Normalized Impact per Paper (SNIP) 2016: 0.740

Cited By

Metrics

All Time Past Year Past 30 Days
Abstract Views 0 0 0
Full Text Views 279 230 19
PDF Downloads 110 98 6