Correlation Between Pin Misalignment and Crack Length in THT Solder Joints

Open access

Abstract

In this manuscript, correlations were searched for between pin misalignments relative to PCB bores and crack propagation after cyclic thermal shock tests in THT solder joints produced from lead-free solder alloys. In total, 7 compositions were examined including SAC solders with varying Ag, Cu and Ni contents. The crack propagation was initiated by cyclic thermal shock tests with 40°C / +125°C temperature profiles. Pin misalignments relative to the bores were characterized with three attributes obtained from one section of the examined solder joints. Cracks typically originated at the solder/pin or solder/bore interfaces and propagated within the solder. It was shown that pin misalignments did not have an effect on crack propagation, thus, the solder joints’ lifetime.

[1] K.J. Puttlitz, K.A. Stalter, Handbook of lead-free solder technology for microelectronic assemblies, Marcel Dekker Inc., New York, 2004.

[2] H. Ma, J.C. Suhling, J Mater Sci. 44, 1141-1158. (2009).

[3] K.S. Kim, S.H. Huh, K. Suganuma, J. Alloy Comp., 352 (2003).

[4] A.A. El-Daly, A.M. El-Taher, Mat. Design 47 (2013).

[5] A.A. El-Daly, A.M. El-Taher, T.R. Dalloul, J. Alloys Comp. 587 (2014).

[6] F.Y. Hung, T.S. Lui, L.H. Chen, C.w: Chan, Mat. Trans. 48, 11 3014-3020 (2007).

[7] S. Terashima, Y. Kariya, T. Hosoi, M. Tanaka, J. Electro Mat. 32, 102 (2003).

[8] H.J. Albrecht, P. Frühauf, K. Wilke, SMTA International Conference Proceedings (2009).

Archives of Metallurgy and Materials

The Journal of Institute of Metallurgy and Materials Science and Commitee on Metallurgy of Polish Academy of Sciences

Journal Information


IMPACT FACTOR 2016: 0.571
5-year IMPACT FACTOR: 0.776

CiteScore 2016: 0.85

SCImago Journal Rank (SJR) 2016: 0.347
Source Normalized Impact per Paper (SNIP) 2016: 0.740

Metrics

All Time Past Year Past 30 Days
Abstract Views 0 0 0
Full Text Views 87 87 8
PDF Downloads 22 22 4