Low Alloy Steel Structures After Welding with Micro-Jet Cooling

Open access

Abstract

The paper focuses on low alloy steel after innovate welding method with micro-jet cooling. Weld metal deposit (WMD) was carried out for welding and for MIG and MAG welding with micro-jet cooling. This method is very promising mainly due to the high amount of AF (acicular ferrite) and low amount of MAC (self-tempered martensite, retained austenite, carbide) phases in WMD. That structure corresponds with very good mechanical properties, ie. high impact toughness of welds at low temperature. Micro-jet cooling after welding can find serious application in automotive industry very soon. Until that moment only argon, helium and nitrogen were tested as micro-jet gases. In that paper first time various gas mixtures (gas mixtures Ar-CO2) were tested for micro-jet cooling after welding.

[1] T. Węgrzyn, J. Mirosławski, A. Silva, D. Pinto, M. Miros, Oxide inclusions in steel welds of car body, Materials Science Forum 636-637, (2010).

[2] A. Lisiecki, Welding of titanium alloy by Disk laser. Proc. of SPIE, 8703, Laser Technology 2012: Applications of Lasers, 87030T (January 22, 2013), DOI: 10.1117/12.2013431, (2012).

[3] T. Wegrzyn, J. Piwnik, B. Łazarz, D. Hadrys, Main micro-jet cooling gases for steel welding, Archives of Metallurgy and Materials 58, (2013).

[4] B. Szczucka-Lasota, B. Formanek, A. Hernas, K Szymański: Oxidation models of the growth of corrosion products on the intermetallic coatings strengthened by a fine dispersive Al2O3, Journal of Materials Processing Technology 164-165, (2005).

[5] G. Golański, J. Słania, Effect of different heat treatments on microstructure and mechanical properties of the martensitic GX12Cr- MoVNbN91 cast steel, Archives of Metallurgy and Materials 58, 1 (2013).

[6] J. Słania, Influence of phase transformations in the temperature ranges of 1250-1000°C and 650-350°C on the ferrite content in austenitic welds made with T 23 12 LRM3 tubular electrode, Metallurgy and Materials 50, 3 (2005).

[7] T. Węgrzyn, Nucleation Of Acicular Ferrite At Oxide Inclusion Sites In Basic Electrode Steel Metal Weld Deposit, International Society of Offshore and Polar Engineers ISOPE´98, Montreal, Canada (1998).

[8] J. Piwnik, D. Hadryś, G. Skorulski, Plastic properties of weld after micro-jet cooling, Journal of Achievements in Materials and Manufacturing Engineering JAMME 59, (2013).

[9] Hadryś, J. Piwnik, W. Majewski, Plastic properties of welds after micro-jet cooling with different cooling gases. Advanced Materials Research 1036, (2014).

[10] R. Burdzik, Z. Stanik, J. Warczek, Method of assessing the impact of material properties on the propagation of vibrations excited with a single force impulse, Archives of Metallurgy and Materials 57, (2012).

[11] P. Czech, Diagnosis of industrial gearboxes condition by vibration and time-frequency, scale-frequency, frequency-frequency analysis. Metalurgija 4/51 (2012).

[12] H. Madej, P. Czech, Discrete wavelet transform and probabilistic neural network in ic engine fault diagnosis, Maintenance and Reliability 4 (2010).

Archives of Metallurgy and Materials

The Journal of Institute of Metallurgy and Materials Science and Commitee on Metallurgy of Polish Academy of Sciences

Journal Information


IMPACT FACTOR 2016: 0.571
5-year IMPACT FACTOR: 0.776

CiteScore 2016: 0.85

SCImago Journal Rank (SJR) 2016: 0.347
Source Normalized Impact per Paper (SNIP) 2016: 0.740

Metrics

All Time Past Year Past 30 Days
Abstract Views 0 0 0
Full Text Views 102 102 18
PDF Downloads 41 41 8