Sliding Wear Behaviour and Corosion Resistance to Ringer’s Solution of Uncoated and DLC Coated X46Cr13 Steel

Open access

Abstract

Sliding wear properties and corrosion resistance in Ringer’s solution of uncoated and diamond-like carbon (DLC) coated X46Cr13 steel was tested. The Raman spectra showed that the DLC film was successfully coated by plasma assisted CVD method onto the steel surface. The wear test, carried out using a ball-on disk tribometer, revealed that the DLC coating show better resistance to sliding wear and lower friction coefficient against a 100Cr6 steel ball than five times softer X46Cr13 steel. The oxidation kinetic parameters were determined by means of both the gravimetric and electrochemical method. It was found that the DLC coating markedly decreased the rate of corrosion of the X46Cr13 steel, irrespective of the corrosion mechanism involved.

[1] J. Jiang, R.D. Arnell, J. Tong, Wear 211, 254-264 (1997).

[2] Y. Liu, E.I. Meletis, Surf. Coat. Technol. 153, 178-183 (2002).

[3] K. Yamaguchi, Y. Wei, I. Horaguchi, Precision Eng. 28, 419-425 (2004).

[4] J. Robertson, Mater. Sci. Eng. R. Rep. 37, 29-281 (2003).

[5] A. Zang, E. Liu, I.F. Annergren, S.N. Tan, S. Zhang, P. Hing, J. Gao, Diamond Relat. Mater. 11, 160-169 (2002).

[6] R.D. Mansano, M. Massi, A.P. Mousinho, L.S. Zambom, L.G. Nato, Diamond Relat. Mater. 12, 749-758 (2003).

[7] S. Sakon, T. Hamada, S. Fujimoto, N. Umesaki, A. Kobayashi, Vacuum 83, 119-128 (2008).

[8] S.C. Tung, H. Gao, Wear 255, 1276-1285 (2003).

[9] C.P.O. Treutler, Surf. Coat. Technol. 200, 1969-1975 (2005).

[10] C. Srividya, S.V. Babu, Chem. Mater. 8, 2528-2539 (1996).

[11] L.A. Thomson, F.C. Law, N. Ruhston, J. Franks, Biomaterials 12, 37-44 (1991).

[12] B. Podgornik, J. Vizintin, Surf. Coat. Technol. 200, 1982-1989 (2005).

[13] J.A. McLaughlin, J.D. Maguire, Diamond Relat. Mater. 17, 873-877 (2008).

[14] A. Dorner-Reisel, C. Schürer, G. Reisel, F. Simon, G. Irmer, E. Müller, Thin Solid. Films 180, 398-410 (2001).

[15] M. Scendo, J. Trela, Int. J. Electrochem. Sci. 8, 8329-8347 (2013).

[16] M. Scendo, N. Radek, J. Trela, Int. J. Electrochem. Sci. 8, 9264-9277 (2013).

[17] M. Scendo, J. Trela, B. Antoszewski, T. Kargul, Innovations in Corros. Mater. Sci. 4, 118-126 (2014).

[18] M. Scendo, J. Trela, N. Radek, Surf. Coat. Technol. 259, 401-407 (2014).

[19] K. Baba, R. Hatada, Thin Solid. Films 506-507, 55-58 (2006).

[20] E.M. Sherif, Mat. Chem. Phys. 129, 961-967 (2011).

[21] A.Y. Musa, A.H. Kadheem, A.B. Mohamod, M.S. Takriff, A.R. Daud, S.K. Kamaruddin, Corros. Sci. 52, 526-533 (2010).

[22] M. Scendo, J. Trela, N. Radek, Corros. Rev. 30, 33-45 (2012).

[23] M. Scendo, J. Trela, Int. J. Electrochem. Sci. 8, 9201-9221 (2013).

[24] M Scendo, J. Trela, Int. J. Electrochem. Sci. 8. 11951-11971 (2013).

[25] R.J. Chin, K. Nobe, J. Electrochem. Soc. 119, 1457-1461 (1972).

[26] A. Dorner-Reisel, C. Schürer, G. Irmer, E. Müller, Surf. Coat. Technol. 177-178, 830-837 (2004).

[27] A. Dorner, B. Wielage, C. Schürer, Thin Solid. Films 355, 214-218 (1999).

[28] Z.H. Liu, J.F. Zhao, J. McLaughlin, Diamond Relat. Mater. 8, 56-65 (1999).

Archives of Metallurgy and Materials

The Journal of Institute of Metallurgy and Materials Science and Commitee on Metallurgy of Polish Academy of Sciences

Journal Information


IMPACT FACTOR 2016: 0.571
5-year IMPACT FACTOR: 0.776

CiteScore 2016: 0.85

SCImago Journal Rank (SJR) 2016: 0.347
Source Normalized Impact per Paper (SNIP) 2016: 0.740

Cited By

Metrics

All Time Past Year Past 30 Days
Abstract Views 0 0 0
Full Text Views 122 101 7
PDF Downloads 68 61 3