The Tribological Properties and the Microstructure Investigations of Tin Babbit with Pb Addition after Heat Treatment

Open access

Abstract

The results of tribological tests and microstructure examinations of tin babbit with 1.5 % Pb addition after heat treatment are presented in this paper. The specimens were annealed at 150°C for 2, 8, 24 and 48 hours and then tested for wear resistance and Brinell hardness. The wear tests were carried out using a block-on-ring tester operating under dry and wet conditions. The samples were also investigated by light microscopy (LM) and scanning electron microscopy (SEM).

[1] N.P. Barykin, F.A. Sadykov, I. R. Aslanyan, Trenie Iznos 21, (6), 127 – 131 (2000).

[2] B. A. Potekhin, V. V. Il’yushin, A. S. Khristolyubov, Materials Science and Heat Treatment 51, (7-8), 378-382 (2009).

[3] F.A. Sadykov, N.P. Barykin, I. Sh. Valeev, V. N. Danilenko, Journal of Materials Engineering and Performance 12, 29 – 36 (2003).

[4] B. Leszczyńska-Madej, M. Madej, Archives of Metallurgy and Materials 56, (3), 805 – 812 (2011).

[5] B. Leszczyńska-Madej, M. Madej, Kovove Mater. 51, 1-10 (2013).

[6] N. P. Barykin, R.F. Fazlyakhmetov, A. Kh. Valeeva, Material Science and Heat Treatment 48, (1-2), 88 – 91 (2006)

[7] PN – ISO 4381:1997 Standard

[8] B. Predel, Phase equilibria, crystallographic and thermodynamic data of binary alloys 5, Berlin Heidelberg, Springer – Verlag (1998)

Archives of Metallurgy and Materials

The Journal of Institute of Metallurgy and Materials Science and Commitee on Metallurgy of Polish Academy of Sciences

Journal Information


IMPACT FACTOR 2016: 0.571
5-year IMPACT FACTOR: 0.776

CiteScore 2016: 0.85

SCImago Journal Rank (SJR) 2016: 0.347
Source Normalized Impact per Paper (SNIP) 2016: 0.740

Metrics

All Time Past Year Past 30 Days
Abstract Views 0 0 0
Full Text Views 103 101 5
PDF Downloads 51 49 4