Characterization of Selected Parameters of Organic-Inorganic Hybrid Membranes Based on Various Polymers and Nd-Fe-B Fillers

Open access

Abstract

In this paper magnetic organic-inorganic hybrid membranes based on EC, PPO polymer matrices and various magnetic powder microparticles were synthesized and studied. Constant pressure permeation technique and the Time Lag method were used to obtain the gas transport coefficients. The mechanical, rheological and magnetic parameters of magnetic hybrid membranes were examined. It was found that their separation and gas transport properties (D, P, S and α) were improved with the decrease in powder particle size and the increase of membrane’s remanence, saturation magnetization and magnetic particle filling. The increase of the magnetic powder addition and a decrease of its granulation improved also mechanical and rheological parameters of the tested membranes. This improvement also had a positive effect on their gas separation properties and their potential usage in the future.

[1] F. Li, Y. Li, T.-S. Chung, S. Kawi, J. Membr. Sci. 356, 14 (2010).

[2] B. Freeman, Y. Yampolskii, I. Pinnau, Materials Science of Membranes for Gas and Vapor Separation, John Wiley and Sons, 2006.

[3] M. Aparicio, A. Duran, J. Sol-Gel Sci. Technol. 31, 103 (2004).

[4] G. Defontaine, A. Barichard, S. Letaief, C. Feng, T. Matsuura, C. Detellier, J. Colloid Interface Sci. 343, 622 (2010).

[5] Z. He, I. Pinnau, A. Morisato, Desalination 146, 11 (2002).

[6] C. Hibshman, C.J. Cornelius, E. Marand, J. Membr. Sci. 211, 25 (2003).

[7] S. M. Kumbar, T. Selvam, C. Gellermann, W. Storch, T. Ballweg, J. Breu, G. Sextl, J. Membr. Sci. 347, 132 (2010).

[8] H. Rao, Z. Zhang, C. Song, T. Qiao, S. Xu, Sep. Purif. Technol. 78, 132 (2011).

[9] D.Q. Vu, W.J. Koros, S.J. Miller, J. Membr. Sci., 211, 311 (2003).

[10] R.M. Dukali, I. Radovic, D.B. Stojanovic, P.S. Uskokovic, N. Romcevic, V. Radojevic, R. Aleksic, J. Alloys Compd. 583, 376 (2014).

[11] K.G. Chandrappa, T.V. Venkatesha, J. Alloys Compd. 542, 68 (2012).

[12] J. Hradil, P. Sysel, L. Brožová, J. Kovářová, J. Kotek, React. Funct. Polym. 67, 432 (2007).

[13] E. Minko, P. Sysel, M. Hauf, J. Brus, L. Kobera, Macromol. Symp. 295, 88 (2010).

[14] D. Sieffert, C. Staudt, Sep. Purif. Technol. 77, 99 (2011).

[15] P. Sysel, E. Minko, M. Hauf, K. Friess, V. Hynek, O. Vopicka, K. Pilnacek, M. Sipek, Desalin. Water Treat. 34, 211 (2011).

[16] H. Maachou, K. Bal, Y. Bal, A. Chagnes, G. Cote, D. Aliouche, Appl. Biochem. Biotechnol. 168, 1459 (2012).

[17] B. Belaabed, J.L. Wojkiewicz, S. Lamouri, N. El Kamchi, T. Lasri, J. Alloys Compd. 527, 137 (2012).

[18] R.M. Khafagy, J. Alloys Compd. 509, 9849 (2011).

[19] L. Zheng, W. Li, M. Zhu, L. Ye, W. Bi, J. Alloys Compd. 560, 80 (2013).

[20] M. Leonowicz, J.J. Wysłocki, Współczesne magnesy. Technologie, mechanizny koercji, zastosowania. WNT, Warszawa 2005.

[21] M. Bystrzejewski, O. Łabedź, W. Kaszuwara, A. Huczko, H. Lange, Powder Technol. 246, 70 (2013).

[22] I. Gancarz, J. Bryjak, M. Bryjak, W. Tylus, G. Poźniak, Eur. Polym. J. 4, 2430 (2006).

[23] G. Dudek, R. Turczyn, A. Strzelewicz, M. Krasowska, A. Rybak, Z.J. Grzywna, Sep. Purif. Technol. 109, 55 (2013).

[24] M.A. Ahmed, R.M. Khafagy, S.T. Bishay, N.M. Saleh, J. Alloys Compd. 578, 121 (2013).

[25] A. Rybak, Z. J. Grzywna, W. Kaszuwara, J. Membr. Sci. 336, 79 (2009).

[26] A. Rybak, A. Strzelewicz, M. Krasowska, G. Dudek, Z.J. Grzywna, Sep. Sci. Technol. 47, 1395 (2012).

[27] A. Rybak, M. Krasowska, A. Strzelewicz, Z. J. Grzywna, Acta Phys. Pol. B 40, 1447 (2009).

[28] Z.J. Grzywna, A. Rybak, A. Strzelewicz, Air enrichment by polymeric magnetic membranes, chapter 9 in a book: Membrane Gas Separation, ed. B. Freeman, Y. Yampolskii, John Wiley & Sons, (2010).

[29] M. Krasowska, A. Rybak, K. Pawełek, G. Dudek, A. Strzelewicz, Z.J. Grzywna, J. Membr. Sci. 415-416, 864 (2012).

[30] Z.J. Grzywna, A. Rybak, P. Borys, K. Pawełek, J. App. Membr. Sci. Tech. 14, 31-40 (2011).

[31] A. Rybak, Z.J. Grzywna, P. Sysel, Sep. Purif. Technol. 118, 424 (2013).

[32] A. Rybak, G. Dudek, M. Krasowska, A. Strzelewicz, Z.J. Grzywna, P. Sysel, Chem. Pap. 68 (10), 1332 (2014).

[33] A. Rybak, G. Dudek, M. Krasowska, A. Strzelewicz, Z.J. Grzywna, Sep. Sci. Technol., 49, 1729 (2014).

[34] P. Borys, A. Rybak, Z.J. Grzywna, Ind. Eng. Chem. Res. 52, 8887 (2013).

[35] A. Strzelewicz, M. Krasowska, G. Dudek, A. Rybak, M. Cieśla, Acta Phys. Pol., B 44, 955 (2013).

[36] A. Rybak, W. Kaszuwara, J. Alloys Compd., 2015 – in press.

[37] S. Kangarlou, I. Haririan, Iran. J. Pharm. Sci. 3, 135 (2007).

[38] C. P. Tsui, C. Y. Tang, T. C. Lee, Polym. Compos. 22, 6 (2001).

[39] A. Boczkowska, S.F. Awietjan, S. Petrzko, K.J. Kurzydłowski, Composites B 43, 636 (2012).

[40] A. Boczkowska, S.F. Awietjan, J. Mater. Sci. 44, 4104 (2009).

Archives of Metallurgy and Materials

The Journal of Institute of Metallurgy and Materials Science and Commitee on Metallurgy of Polish Academy of Sciences

Journal Information


IMPACT FACTOR 2016: 0.571
5-year IMPACT FACTOR: 0.776

CiteScore 2016: 0.85

SCImago Journal Rank (SJR) 2016: 0.347
Source Normalized Impact per Paper (SNIP) 2016: 0.740

Metrics

All Time Past Year Past 30 Days
Abstract Views 0 0 0
Full Text Views 109 109 7
PDF Downloads 48 48 5