The Tribological Properties of Laser Hardened Steel 42CrMo4 / Właściwości Tribologiczne Stali 42Crmo4 Hartowanej Laserowo

Open access

The paper presents results of research tribological properties laser hardened steel 42CrMo4. Parameter influencing on the quality of the hardened surface was laser head speed. The study was conducted on friction tester pin-on-disc type T-11, and a counter sample disc was silicate. Parameter determining the quality of the surface layer is the intensity of wear. Based on the results we obtain information about the laser head speed to temper steel 42CrMo4 so as to maintain a high resistance to wear.

[1] T. Węgrzyn, J. Piwnik, B. Łazarz, D. Hadryś, Main micro-jet cooling gases for steel welding, Archives of Metallurgy and Materials 58, 555-557 (2013).

[2] T. Węgrzyn, J. Piwnik, D. Hadryś, Oxygen in steel WMD after welding with micro-jet cooling, Archives of Metallurgy and Materials 58, 1067-1070 (2013).

[3] W. Tarasiuk, B. Szczucka-Lasota, J. Piwnik, W. Majewski, Tribological Properties of Super Field Weld with Micro-Jet Process, Advanced Materials Research 1036, 452-457 (2014), DOI:10.4028/www.scientific.net/AMR.1036.452.

[4] T. Węgrzyn, J. Mirosławski, A. Silva, D. Pinto, M. Miros, Oxide inclusions in steel welds of car body. V International Materials Symposium MATERIAIS 2009, Lisbon 2009, published in official conference CD and in Materials Science Forum 6, 585-591 (2010).

[5] T. Węgrzyn, J. Piwnik, Low alloy welding with micro-jet cooling, Archives of Metallurgy and Materials 57, 540-543, (2012).

[6] С.А. Астапчик, В.С. Голубев, А.Г. Маклаков, Лазерные технологии: возможности и перспективы обработки деталей и инструмента, Тяжелое машиностроение 2, 33-37 (2004).

[7] С.А. Астапчик, В.С. Голубев, А.Г. Маклаков, Лазерные технологии в машиностроении и металлообработке, Минск, Белорусская наука, 2008.

[8] С.А. Астапчик, В.С. Голубев, А.Г. Маклаков, Лазерные макротехнологии и оборудование, разработанные в ФТИ НАН Беларуси, Сборник трудов ХV н.-т. конференции „Машиностроение и техносфера ХХI века”, Севастополь 1, 73-76 (2008).

[9] R. Burdzik, L. Konieczny, Research on structure, propagation and exposure to general vibration in passenger car for different damping parameters, Journal of Vibroengineering 15, 1680-1688 (2013).

[10] R. Burdzik, Research on the influence of engine rotational speed to the vibration penetration into the driver via feet - multidimensional analysis, Journal of Vibroengineering 15, 2114-2123 (2013).

[11] R. Burdzik, L. Konieczny, T. Figlus, Concept of On-Board Comfort Vibration Monitoring System for Vehicles, Mikulski, J ACTIVITIES OF TRANSPORT TELEMATICS Book Series: Communications in Computer and Information Science 395, 418-425, (2013).

[12] A. Lisiecki, Welding of thermomechanically rolled fine-grain steel by different types of lasers, Arch. Metall. Mater. 59, 1625-1631 (2014). DOI: 10.2478/amm-2014-0276.

[13] A. Lisiecki, Titanium Matrix Composite Ti/TiN Produced by Diode Laser Gas Nitriding. Metals. 5, 54-69 (2015), DOI:10.3390/met5010054.

[14] G. Golański, A. Zieliński, J. Słania, J. Jasak, Mechanical Properties of VM12 steel after 30 000 hrs of ageing at 600oC temperature, Archives of Metallurgy and Materials 59, 1357-1360 (2014).

[15] G. Golański, P. Gawień, J. Słania, Examination of Coil Pipe Butt Joint Made of 7CrMoVTib10 - 10(T24) Steel After Service, Archives of Metallurgy and Materials 57, 553-557 (2012).

[16] G. Golański, J. Jasak, J. Słania, Microstructure, properties and welding of T24 steel - critical review, Kovove Materialy 52, 99-106 (2014).

[17] R. Burdzik, Z. Stanik, J. Warczek, Method of assessing the impact of material properties on the propagation of vibrations excited with a single force impulse, Archives of Metallurgy and Materials 57, 409-416 (2012).

[18] R. Burdzik, Ł. Konieczny, Z. Stanik, P. Folęga, A. Smalcerz, A. Lisiecki, Analysis of Impact of Chosen Parameters on the Wear of Camshft, Archives of Metallurgy and Materials 59, 957-963 (2014).

[19] B. Oleksiak, M. Koziol, J. Wieczorek, M. Krupa, P. Folega, Strength of Briquettes made of Cu Concentrate and Carbon- Bearing Materials, Metalurgija 54, 95-97 (2015).

[20] B. Oleksiak, G. Siwiec, A. Blacha-Grzechnik, J. Wieczorek, The Obtained of Concentrates Containing Precious Metals for Pyrometallurgical Processing, Metalurgija 53, 605-608 (2014).

[21] B. Oleksiak, J. Labaj, J. Wieczorek, A. Blacha-Grzechnik, R. Burdzik, Surface Tension of Cu-Bi Alloys and Wettability in a Liquid Alloy - Refractory Material - Gaseous Phase System, Archives of Metallurgy and Materials 59, 281-285 (2014).

[22] A.I. Gordienko, V.S. Golubev, A.T. Volocko, W. Tarasiuk, Lazernye tehnologii obrabotki materialov: VII-th International symposium on mechanics of materials and structures, Wydaw. Politechniki Białostockiej, Augustów, 82-83, (2013).

Archives of Metallurgy and Materials

The Journal of Institute of Metallurgy and Materials Science and Commitee on Metallurgy of Polish Academy of Sciences

Journal Information


IMPACT FACTOR 2016: 0.571
5-year IMPACT FACTOR: 0.776

CiteScore 2016: 0.85

SCImago Journal Rank (SJR) 2016: 0.347
Source Normalized Impact per Paper (SNIP) 2016: 0.740

Cited By

Metrics

All Time Past Year Past 30 Days
Abstract Views 0 0 0
Full Text Views 132 111 8
PDF Downloads 90 86 5