Drawability Studies of Magnesium Alloy Sheets at Elevated Temperature / Badania Tłoczności Blach Ze Stopów Magnezu W Podwyższonej Temperaturze

Open access

Abstract

The paper presents the results of a study of drawability of thin AZ31 magnesium alloy metal sheets. These studies are a continuation of experiences in presenting the characteristics of technological plasticity of strips made of magnesium alloy which have been cast between rolls in vertical and horizontal systems called ‘twin-roll casting’. In the context of previous experiments conducted at the Institute of Material Technology of the Silesian University of Technology in cooperation with the Technical University - Bergakademie Freiberg (Germany), drawability of these strips at elevated temperatures has been comprehensively defined while using forming limit curves. Due to low formability of magnesium alloys at ambient temperature, formability tests - including cup forming tests presented in this paper - have been carried out in heated dies at temperature range of 200°C to 350°C. A modern AutoGrid digital local strain analyzer has been used in the examinations and the method of image analysis of deformed coordination nets has been applied. Quantitative and qualitative impact of deformation temperature upon the drawability effects of AZ31 magnesium alloys products have been evaluated.

[1] P.G. Grocock, P.M. Thomas, Patent US5372180A Twin roll casting, Dorset, December 13 (1994).

[2] http://web.ornl.gov/sci/ees/transportation/pdfsMerged2011Highlights.pdf

[3] H.E. Friedrich, B.L. Mordike (Eds.), Springer-Verlag, Magnesium Technology. Metallurgy, Design Data, Automotive Applications, Berlin Heidelberg (2006).

[4] F. Wojtkun, J. Sołncew, Materiały specjalnego przeznaczenia, Politechnika Radomska, Radom (2001).

[5] P. Bakke, K. Pettersen, H. Westengen, Enhanced ductility and strength through RE addition to magnesium die casting alloys, Magnesium Technology 2003, in: H.I. Kaplan (Ed.), TMSAIME, Warrendale (2003).

[6] Z. Górny, J. Sobczak, ZA-PIS , Nowoczesne tworzywa odlewnicze na bazie metali nieżelaznych, Kraków (2005).

[7] D. Kuc, E. Hadasik, I. Schindler, P. Kawulok, R. Śliwa: Arch. Metal. Mater. 58, 1, 151 (2013).

[8] M. Legerski, J. Plura, I. Schindler, D. Kuc, G. Niewielki, E. Hadasik, High. Temp. Mater. Proc. 30, 1-2, 63 (2011).

[9] I. Schindler, P. Kawulok., E. Hadasik, D. Kuc, Journ. Mater. Eng. Perform. 22, 3, 890 (2013).

[10] D. Kuc, E. Hadasik, Sol. St. Phenom. 197, 232 (2013).

[11] M. Hyrcza-Michalska, Metallurgy? Metallurgical Engineering News 80, 8, 545 (2013).

[12] J. Dembinska, K. Neh, M. Ullman, R. Kawalla, Properties and applications of magnesium strips produced by twingroll- casting and hot rolling, in: H. Wiśniewska-Weinert (Ed.), Advanced technologies for forming tool life improvement, Metal Forming Institute, Poznań (2012).

Archives of Metallurgy and Materials

The Journal of Institute of Metallurgy and Materials Science and Commitee on Metallurgy of Polish Academy of Sciences

Journal Information


IMPACT FACTOR 2016: 0.571
5-year IMPACT FACTOR: 0.776

CiteScore 2016: 0.85

SCImago Journal Rank (SJR) 2016: 0.347
Source Normalized Impact per Paper (SNIP) 2016: 0.740

Metrics

All Time Past Year Past 30 Days
Abstract Views 0 0 0
Full Text Views 51 51 17
PDF Downloads 10 10 3