Fabrication Of Zn4Sb3 Alloys By A Combination Of Gas-Atomization And Spark Plasma Sintering Processes

Open access

Abstract

In this study, single phase polycrystalline Zn4Sb3 as well as 11 at.% Zn-rich Zn4Sb3 alloy having ε-Zn4Sb3 (majority phase) and Zn (minority phase) phases bulk samples produced by gas-atomization and subsequently consolidated by spark plasma sintering (SPS) process. The crystal structures were analyzed by X-ray diffraction (XRD) and cross-sectional microstructure were observed by the scanning electron microscopy (SEM). The internal grain microstructure of 11at.% Zn-rich Zn4Sb3 powders shows lamellar structure. Relative density, Vickers hardness and crack lengths were measured to investigate the effect of sintering temperature of Zn4Sb3 samples which are sintered at 653, 673 and 693 K. Relative density of the single phase bulk Zn4Sb3 sample reached to 99.2% of its theoretical density. The micro Vickers hardness of three different sintering temperatures were found around 2.17 – 2.236 GPa.

REFERENCES

  • [1] T. Caillat, J.P. Fleurial, A. Borshchevsky, J. Phys. Chem. Solids. 58, 1119 (1997).

  • [2] H.W. Mayer, I. Mikhali, K. Schubert, J. Less Comm. Met. 59, 43 (1978).

  • [3] M. Tapiero, S. Tarabichi, J.G. Gies, C. Noguet, J.P. Zielinger, M. Joucla, J. Loison, M. Robino, J. Henrion, Sol. Energy Mater. 12, 257 (1985).

  • [4] V. Izard, M.C. Record, J.C. Tedenac, S.G. Fries, Calphad. 25, 567 (2001).

  • [5] S. Ur, P. Nash, I. Kim, J. Alloys Compd. 361, 84 (2003).

  • [6] K.T. Kim, K.M. Jang, K.J. Kim, G.H. Ha, J. Kor. Powd. Met. Inst. 17, 2 (2010).

  • [7] E.K. Park, S.M. Hong, J.J. Park, M.K. Lee, C.K. Rhee, K.W. Seol, J. Kor. Powd. Met. Inst. 20, 4 (2013).

  • [8] V. Izard, M.C. Record, J.C. Tedenac, J. Alloys Compd. 345, 257 (2002).

  • [9] T.J. Zhu, X.B. Zhao, M. Yan, S.H. Hu, T. Li, B.C. Chou, Mater. Lett. 46, 44 (2000).

  • [10] T. Aizawa, Y. Iwaisako, K.I. Fukagawa, A. Yamamoto, in: Proceedings of the 18th international conference on thermoelectrics 173, USA (1999).

  • [11] M.H. Bhuiyan, T.S. Kim, J.M. Koo, S.J. Hong, J. Alloys Compd. 509, 1722 (2011).

  • [12] S.J. Hong, S.H. Lee, B.S. Chun, Mater.Sci.Eng. B. 98, 232 (2003).

  • [13] S.J. Hong, B.S. Chun, Mater. Res. Bull. 38, 599 (2003).

  • [14] Powder Diffract. File, JCPDS-ICDD, 12 Campus Boulevard, Newtown Square, PA 19073, USA (2001).

  • [15] T. Caillat, J. Fleurial, A. Borshchevsk, in: Proceedings of the 15th international conference on thermoelectrics, Pasadena, 151, USA (1996).

  • [16] G.J. Snyder, M. Christensen, E. Nishibori, T. Caillat, B.B. Iversen, Nat. Mater. 3, 458 (2004).

  • [17] J.H. Ahn, M.W. Oh, B.S. Kim, S.D. Park, B.K. Min, H.W. Lee, Y.J. Shim, Mater. Res. Bull. 46, 1490 (2011).

  • [18] S. Ur, P. Nash, R. Schwarz, Met. Mater. Int. 11, 435 (2005).

Archives of Metallurgy and Materials

The Journal of Institute of Metallurgy and Materials Science and Commitee on Metallurgy of Polish Academy of Sciences

Journal Information


IMPACT FACTOR 2016: 0.571
5-year IMPACT FACTOR: 0.776

CiteScore 2016: 0.85

SCImago Journal Rank (SJR) 2016: 0.347
Source Normalized Impact per Paper (SNIP) 2016: 0.740

Metrics

All Time Past Year Past 30 Days
Abstract Views 0 0 0
Full Text Views 23 23 20
PDF Downloads 6 6 6