A Comparison of Models Describing Heat Transfer in the Primary Cooling Zone of a Continuous Casting Machine

Open access

Abstract

This paper presents the findings of research conducted concerning the determination of thermal boundary conditions for the steel continuous casting process within the primary cooling zone. A cast slab - with dimensions of 1100 mm×220 mm - was analysed, and models described in references were compared with the authors’ model. The presented models were verified on the basis of an industrial database. The research problem was solved with the finite element method using the ProCAST software package.

[1] T. Telejko, Z. Malinowski, M. Rywotycki, Archives of Metal-lurgy and Materials 54, 837-844 (2009).

[2] M. Biedrońska, R Grzymkowski, Krzepnięcie Metali i Stopów 19, 11-19 (1994).

[3] M. Biedrońska, R. Grzymkowski, Krzepnięcie Metali i Stopów 18, 21-28 (1993).

[4] A. Kapusta, A. Wawrzynek, Krzepnięcie Metali i Stopów 18, 87-94 (1993).

[5] A. Kapusta, A. Wawrzynek, Krzepnięcie Metali i Stopów 16, 150-158 (1987).

[6] S.H. Seyedein, M. Hasan, Int. J. Heat Mass Transfer 40, 18, 4405-4423 (1997).

[7] X.K. Lan, J.M. Khodadadi, International Journal of Heat and Mass Transfer. 44, 953-965 (2001).

[8] X.K. Lan, J.M. Khodadadi, International Journal of Heat and Mass Transfer 44, 3431-3442 (2001).

[9] R.B. Mahaparta, J.K. Brimacombe, I.V. Samarasekera, Metal-lurgical and Materials Transactions B 22B, 6, 875-888 (1991).

[10] J. Falkus, K. Miłkowska-Piszczek, M. Rywotycki, E. Wielgosz, Journal of Achievements in Materials and Manufacturing Engineering 55, 2, 668-672 (2012).

[11] J.K. Park, B.G. Thomas, I.V. Samarasekera, Ironmaking and Steelmaking 29, 5, 359-375 (2002).

[12] Z. Malinowski, T. Telejko, B. Hadała, Archives of Metallurgy and Materials 57, 1, 325-331 (2012).

[13] M. Rywotycki, K. Miłkowska-Piszczek, L. Trebacz, Archives of Metallurgy and Materials 57, 1, 385-393 (2012).

[14] A. Buczek, A. Burbelko, P. Drożdż, M. Dziarmagows-ki, J. Falkus, M. Karbowniczek, Tomasz Kargul, K. Miłkowska-Piszczek, M. Rywotycki, K. Sołek, W. Ślęzak, T. Telejko, L. Trębacz, E. Wielgosz, Modelowanie procesu ciągłego odlewania stali - monografia, Radom 2012.

[15] J.S. Ha, J.R. Cho, B.Y. Lee, M.Y. Ha, Journal of Material processing Technology 113, 1-3, 257-261 (2001).

[16] ProCAST 2013, User Manual.

[17] K. Miłkowska-Piszczek, M. Korolczuk-Hejnak, Archives of Metallurgy and Materials 58, 4, 1267-1274 (2013).

[18] K. Miłkowska-Piszczek, PhD Thesis: Opracowanie i zastosowanie numerycznego modelu procesu COS do wyznaczenia technologicznych parametrów odlewania stali S235, AGH Uni-versity of Science and Technology, Kraków, 2013.

[19] K. Miłkowska-Piszczek, J. Falkus, Metalurgija 53, 4, 571-573 (2014).

Archives of Metallurgy and Materials

The Journal of Institute of Metallurgy and Materials Science and Commitee on Metallurgy of Polish Academy of Sciences

Journal Information


IMPACT FACTOR 2016: 0.571
5-year IMPACT FACTOR: 0.776

CiteScore 2016: 0.85

SCImago Journal Rank (SJR) 2016: 0.347
Source Normalized Impact per Paper (SNIP) 2016: 0.740

Cited By

Metrics

All Time Past Year Past 30 Days
Abstract Views 0 0 0
Full Text Views 124 97 8
PDF Downloads 51 41 2