Effect of Tool Shape on Temperature Field in Friction Stir Spot Welding

Open access

Friction stir welding (FSW) is one of the youngest methods of metal welding. Metals and its alloys are joined in a solid state at temperature lower than melting points of the joined materials. The method is constantly developed and friction stir spot welding (FSSW) is one of its varieties. In the friction stir spot welding process a specially designed tool is brought into rotation and plunged, straight down, in the joined materials. Heat is generated as a result of friction between the tool and materials, and plastic deformation of the joined materials. Softening (plastic zone) of the joined materials occurs. Simultaneously the materials are stirred. After removal of the tool, cooling down the stirred materials create a solid state joint.

Numerical simulation of the process was carried out with the ADINA System based on the finite element method (FEM). The problem was considered as an axisymmetric one. A thermal and plastic material model was assumed for Al 6061-T6. Frictional heat was generated on the contact surfaces between the tool and the joined elements. The model of Coulomb friction, in which the friction coefficient depends on the temperature, was used.

An influence of the tool geometry on heat generation in the welded materials was analysed. The calculations were carried out for different radiuses of the tool stem and for different angles of the abutment. Temperature distributions in the welded materials as a function of the process duration assuming a constant value of rotational tool speed and the speed of tool plunge were determined. Additionally, the effect of the stem radius and its height on the maximum temperature was analysed. The influence of tool geometry parameters on the temperature field and the temperature gradient in the welded materials was shown. It is important regarding the final result of FSSW.

[1] R.S. Mishra, Scripta Mater. 58, 325 (2008).

[2] A. Gerlich, P. Su, T.H. North, J. Mater. Sci. 40, 6473 (2005).

[3] S.G. Arul, S.F. Miller, G.H. Kruger, T.-Y. Pan, P.K. Mallick, A.J. Shih, Sci, Technol, Weld. Joi. 13, 629 (2008).

[4] Q. Yang, S. Mironov, Y.S. Sato, K. Okamoto, Mat. Sci. Eng. A 527, 4389 (2010).

[5] W. Yuan, R.S. Mishra, S. Webb, Y.L. Chen, B. Carlson, D.R. Herling, G.J. Grant, J. Mater. Process. Tech. 211, 972 (2011).

[6] M. Awang, V.H. Mucino, Z. Feng, S.A. David, Technical Paper for the Society of Automotive Engineers 2005 World Congress, Detroit (2005).

[7] S. Mandal, J. Rice, A.A. Elmustafa, J. Mater. Process. Tech. 203, 411 (2008).

[8] P. Lacki, Z. Kucharczyk, R.E. Sliwa, T. Ga łaczynski, Rudy Metale 57/8, 524 (2012) in Polish.

[9] K.J. Colligan, R.S. Mishra, Scripta Mater. 58, 327 (2008).

[10] Y.J. Chao, X. Qi, W. Tang, J. Manuf. Sci. E-T Asme. 125, 138 (2003).

[11] M. Riahi, H. Nazari, Int. J. Adv. Manuf. Technol. 55, 143 (2011).

[12] ADINA-AUI, Version 8.8.0, 1994-2012 ADINA R&D. Inc.

[13] P. Lacki, Friction modelling in the bulk metal forming processes, Wydawnictwo Politechniki Czestochowskiej, seria Monografie nr 169, Czestochowa 2010 (in Polish).

[14] http://asm.matweb.com/search/Specific Material.asp?bassnum=MA6061t6

Archives of Metallurgy and Materials

The Journal of Institute of Metallurgy and Materials Science and Commitee on Metallurgy of Polish Academy of Sciences

Journal Information

IMPACT FACTOR 2016: 0.571
5-year IMPACT FACTOR: 0.776

CiteScore 2016: 0.85

SCImago Journal Rank (SJR) 2016: 0.347
Source Normalized Impact per Paper (SNIP) 2016: 0.740

Cited By


All Time Past Year Past 30 Days
Abstract Views 0 0 0
Full Text Views 212 192 18
PDF Downloads 101 94 14