Volume 56: Issue 3 (Sep 2011)

Publication Date:: 01 Sep 2011

Problem of Lattice Rotation Due to Plastic Deformation. Example of Rolling of f.c.c Materials

By: K. Wierzbanowski, M. Wroński, A. Baczmański, B. Bacroix, P. Lipinski and A. Lodini

Pages: 575–584
The Studies of Assumptions Accompanying the Calibration of High-Temperature Solution Calorimeter

By: T. Maciąg, A. Dębski and K. Rzyman

Pages: 585–592
An Analysis of Steel Viscosity in the Solidification Temperature Range

By: K. Sołek, M. Korolczuk-Hejnak and M. Karbowniczek

Pages: 593–598
Electrochemical Synthesis of Tetragonal SnO₂ Phase

By: K. Mech, R. Kowalik and K. Fitzner

Pages: 599–663
The Influence of Chemical Composition of Steel on Steel Desulphurization

By: B. Bulko, J. Kijac and T. Borovský

Pages: 605–609
Numerical Simulation of Behaviour a Non-Metallic Inclusions in an One-Strand Slab Tundish with Steel Flow Controll Devices

By: A. Cwudziński

Pages: 611–618
Optimal Production of Electrolytic Copper Determined by the Concentration and Distribution of Copper Concentrates to Smelters on the Example of KGHM

By: D. Saramak

Pages: 619–626
Natural Radioactivity in Steel Slag Aggregate

By: T. Sofilić, D. Barišić and U. Sofilić

Pages: 627–634
Simulation of Oxygen and Nitrogen Removal from Steel by Means of Titanium and Aluminum

By: J. Iwanciw, D. Podorska and J. Wypartowicz

Pages: 635–644
Oscillations and Self-Organization Phenomena During Electrodeposition of Silver-Indium Alloys. Experimental Study

By: T. Dobrovolska, I. Krastev, P. Żabiński, R. Kowalik and A. Zielonka

Pages: 645–657
Codeposition of SiC Particles with Electrolytic Nickel

By: I. Dobosz, E. Rudnik and L. Burzyńska

Pages: 665–670
Prediction of Mechanical Properties of Cast A356 Alloy as a Function of Microstructure and Cooling Rate

By: M. Shabani and A. Mazahery

Pages: 671–675
Formation of Layered Mg/Eutectic Composite Using Diffusional Processes at the Mg-Al Interface

By: A. Dziadoń, R. Mola and L. Błaż

Pages: 677–684
Studies on the Process of Heat Treatment of Conductive AlZr Alloys Obtained in Various Productive Processes

By: T. Knych, M. Piwowarska and P. Uliasz

Pages: 685–692
Processing, Microstructure and Properties of Laminated Ni-Intermetallic Composites Synthesised Using Ni Sheets and Al Foils

By: M. Konieczny, R. Mola, P. Thomas and M. Kopciał

Pages: 693–702
The Kinetics of Phase Transformations During Continuous Cooling of the Ti6Al4V Alloy from the Single-Phase β Range

By: R. Dąbrowski

Pages: 703–707
Tribological Properties of Tyre Steel in Rolling-Sliding Contact against Bainitic Rail Steel

By: J. Krawczyk, M. Witaszek and K. Witaszek

Pages: 709–715
The Influence of the Laser Treatment on Microstructure of the Surface Layer of an X5CrNi18-10 Austenitic Stainless Steel

By: M. Rozmus-Górnikowska, J. Kusiński and M. Blicharski

Pages: 717–721
Microstructural Characteristic of N₂ Shielding Gas in Coating FeCrC Composite to the Surface of AISI 1030 Steel with PTA Method

By: T. Yildiz and A. Gür

Pages: 723–729
Model of Phase Transformation for Niobium Microalloyed Steels

By: B. Niżnik and M. Pietrzyk

Pages: 731–742
Effect of Shot Peening and NiAl Coating on Fatigue Limit of Mg-Al-Zn-Mn Alloy

By: P. Mrva, D. Kottfer and Ł. Kaczmarek

Pages: 743–748
Microstructure and Properties of Friction Stir Butt-Welded Magnesium Casting Alloys

By: D. Miara, A. Pietras and K. Mroczka

Pages: 749–758
Evaluation of Susceptibility to Hot Cracking of Magnesium Alloy Joints in Variable Stiffness Condition

By: A. Kierzek and J. Adamiec

Pages: 759–767
The Influence of Construction Factors on the Weldability of AZ91E Alloy

By: J. Adamiec

Pages: 769–778
Friction Stir Processing - Analysis of the Process

By: M. St. Węglowski and A. Pietras

Pages: 779–788
The Properties of Fe-Ni-Mo-Cu-B Materials Produced Via Liquid Phase Sintering

By: J. Karwan-Baczewska

Pages: 789–796
Sintered Materials for Bipolar Plates

By: R. Włodarczyk and A. Dudek

Pages: 797–803
The Properties of Babbitt Bushes in Steam Turbine Sliding Bearings

By: B. Leszczyńska-Madej and M. Madej

Pages: 805–812
Tribological Properties of Rail Steel in Straight Moderately Loaded Sections of Railway Tracks

By: H. Bąkowski, A. Posmyk and J. Krawczyk

Pages: 813–822
The influence of the High Drawing Speed on Mechanical-Technological Properties of High Carbon Steel Wires

By: M. Suliga

Pages: 823–828
Brazing a Graphite Composite to Molybdenum Alloy TZM Using Active Copper-Based Filler Metals with Chromium Additive

By: Z. Mirski

Pages: 829–837
Effect of the Surface Oxidation on the Hot-Dip Zinc Galvanizing of Cast Iron

By: D. Jędrzejczyk and M. Hajduga

Pages: 839–849

Archives of Metallurgy and Materials

The Journal of Institute of Metallurgy and Materials Science and Commitee on Metallurgy of Polish Academy of Sciences

Journal Information

Online ISSN:: 2300-1909

First Published:: 21 Dec 2010

Language:: English

IMPACT FACTOR 2016: 0.571
5-year IMPACT FACTOR: 0.776

CiteScore 2016: 0.85

SCImago Journal Rank (SJR) 2016: 0.347
Source Normalized Impact per Paper (SNIP) 2016: 0.740

Recently viewed (1)

Volume 56: Issue 3 (Sep 2011)

Archives of Metallurgy and Materials

The Journal of Institute of Metallurgy and Materials Science and Commitee on Metallurgy of Polish Academy of Sciences

Journal Information