Two tests were carried out to measure the standard flat fan nozzles wear during a specific period of an accelerated wear procedure. The first test aimed at getting 10% increase in the flow rate compared to the nominal flow rate, which is the threshold to replace the nozzles according to the nozzles testing standards. The second test was to wear the nozzles intensively (100 hours of accelerated wear), which represents the use of nozzles beyond the allowed threshold. The results showed that the flow rate reached 1.31 l·min−1 (equal to 10% increase) for the tested nozzles after 35 hours of the wear test. For the second test, the 10% increase of the flow rate was reached after approximately 30 hours. The wear rate reached 27.5% at the end of the test and this is 2.7 times more than the standardized threshold.
If the inline PDF is not rendering correctly, you can download the PDF file here.
ASAE S471 (1999). Procedure for measuring sprayer nozzle wear rate. St. Joseph Mich.: ASAE Standards 46th ed.
Directive 2009/128/EC (2009). Establishing a framework for Community action to achieve the sustainable use of pesticides. Official Journal of the European Union L309 71-86.
Duvnjak V. Pliestić S. Filipović D. Banaj Đ. Andrić L. (2009). Effect of orifice wear of boom sprayer nozzles on spray characteristic. Agronomski glasnik71(4) 261-270.
EN 13790-1:2003 (2003). European Standard. Agricultural machinery – Sprayers – Inspection of sprayers in use – Part 1: Field crop sprayers.
Friedrich T. (2001). Agricultural sprayer standards and prospects for development of standards for other farm machinery. Agricultural Engineering International: the CIGR Journal of Scientific Research and Development. Vol. III.
Huyghebaert B. Mostade O. Sawa J. (2004). EU management of the plant protection pesticides. Teka-Commission Of Motorization And Power Industry In Agriculture4 15-21.
Huyghebaert B. (2015). Verification of measurement methods of flat fan nozzles working parameters used in agriculture Ph.D Thesis University of Life Sciences in Lublin Poland.
ISO 5681:1992 (1992). International Standard. Equipment for crop protection – Vocabulary
ISO 5682-1:1996 (1996). International Standard. Equipement for crop protection – Spraying equipment – Part 1: Test methods for sprayer nozzles.
ISO 16122-2:2015 (2015). Agricultural and forestry machinery – Inspection of sprayers in use - Part 2: Horizontal boom sprayers.
Krause C.R. Reichard D.L. Zhu H. Brazee R.D. Fox R.D. Ozkan H.E. (2003). Evaluation of fan‐pattern spray nozzle wear using scanning electron microscopy. Scanning25(1) 8-11.
Krishnan P. Evans T. Ballal K. Kemble L.J. (2004). Scanning electron microscopic studies of new and used fan nozzles for agricultural sprayers. Applied engineering in agriculture 20(2) 133-138.
Narra S. Mehlstaubl V. Ay P. (2014). Structural analysis of different agglomerates using digital microscopy. Conference Paper. XXVII International Mineral Processing Congress “Optimising water and energy usage for sustainable mining” At Santiago Chile.
Sztachó-Pekáry I. (2005). The dimensional change of fan nozzle tip orifices in consequence of wear process. Electronic Journal of Polish Agricultural Universities EJPAU8(4) #59.