A breaker plate of a screw mixer is an efficient mixing device for use in homogenizing nanocomposites. This research was undertaken to investigate the effects of glycerol and diameter of holes in a breaker plate on performance of a screw mixer for nanocomposites. Samples of the nanocomposites were formulated by blending 1000 g cassava starch, 45-55% glycerol and 2% magnetite nanoparticles; and used to evaluate the performance of a locally developed screw mixer at 5 mm and 7 mm diameters of holes in its breaker plate. The effects of glycerol and diameter of holes in the breaker plate on mixing index, amount of unmixed nanocomposites and output/1000g were evaluated as performance indices for 1 hour. Empirical models were determined for predicting the performance of the mixer within the designed criteria. The results showed that the output/1000g and the mixing index increased with higher glycerol and diameter of holes in the breaker plate. However, the amount of unmixed nanocomposites decreases with a higher diameter of holes in the breaker plate (p<0.05). The maximum output/1000g and mixing index lies between 5 mm diameter of holes in the breaker plate and 55% glycerol concentration with an approximate desirability of 0.60. The empirical models developed were fit (R2=0.89, p<0.05); and there were no significant differences between actual and predicted values. The results suggest application of 5 mm diameter of holes in the breaker plate for homogenizing nanocomposites for optimum performance.
If the inline PDF is not rendering correctly, you can download the PDF file here.
Anuku A. (2012). Chemical and biochemical synthesis of magnetite nanoparticles in detection and treatment of breast cancer. A paper presented at 5 day workshop in the Federal University of Technology Minna Nigeria in collaboration with African University of Science and Technology Abuja Nigeria. pp. 1-12. https://doi.org/10.1557/jmr.2012.317.
Azeredo H. M. C. (2009). Nanocomposites for food packaging applications. Food Research International 42(9) 1240-1253.
Connelly R. K. Kokini J.L. (2007). Examination of the mixing ability of single and twin screw mixers using 2D finite element method simulation with particle tracking. Journal of Food Engineering 79(3) 956-969.
De la Vara S. R. Domínguez D. J. (2002). Métodos de Superficie De Respuesta Un Estudio Comparativo. Revista de Matemáticas Teoríay Aplicaciones 1(1) 47-65.
Fadeyibi A. Osunde Z.D. Agidi G. Egwim E.C. (2016a). Design of single screw extruder for homogenizing bulk solids. Agricultural Engineering International: CIGR Journal18(4) 222-231.
Fadeyibi A. Osunde Z.D. Agidi G. Egwim E.C. (2016b). Mixing index of a starch composite extruder for food packaging application. In: Inamuddin S. (Editor): Green polymer composites technology: properties and applications. CRC press and Taylor&Francis Group. ISBN 9781498715461.
Fadeyibi A. Osunde Z.D. Agidi G. Evans E.C. (2014). Flow and strength properties of cassava and yam starch-glycerol composites essential in the design of handling equipment for granular solids. Journal of Food Engineering129 38-46.
Jahani M. Alizadeh M. Pirozifard M. Qudsevali A. (2008). Optimization of Enzymatic Degumming Process for RBO Using Response Surface Methodology. LWT – Food Science and Technology 41(10) 1892-1898.
Hu D. D. Chen J. N. (2006). Simulation of polymer melt flow fields in intermeshing co-rotating three-screw extruders Journal of Beijing Institute of Technology 15(3) 360-365.
Joe-Tools Precision Design and Manufacturing (2009). Complete design and manufacturing resource for premium quality extrusion products that include innovative and industry standard Cross-heads Tips Dies Screws Barrels Breaker Plates and all accessories. http://www.joe-tools.com/int_crossheads.html.
Khuri A. A. Cornell J. A. (1987). Response Surfaces: Designs and Analyses Marcel Dekker Inc. New York pp. 1-17 254. ISBN 9780824797416.
Lindt J.T. Ghosh A.K. (1992). Fluid mechanics of the formation of polymer blends. Part I: Formation of lamellar structures. Polymer Engineering Science32 1802-1813.
Lee T. H. Kwon T. H. (1999). A new representative measure of chaotic mixing in a chaos single-screw extruder. Advances in Polymer Technology18(1) 53-68.
Milán-Carrillo J. Montoya-Rodríguez A. Gutiérrez-Dorado R. Perales-Sánchez X. Reyes-Moreno C. (2012). Optimization of Extrusion Process for Producing High Antioxidant Instant Amaranth (Amaranthus hypochondriacus L.) Flour Using Response Surface Methodology. Applied Mathematics3 1516-1525.
Pinto G. Tadmor Z. (1970). Mixing and Residence Time Distribution in Melt Screw Extruders. Polymer Engineering Science10 279-288.
Rauwendaal C. (1986). Polymer Extrusion. Hanser Publishers Munich. ISBN 3-446-14196-0.
Sau M. Jana S. C. (2004). A study on the effects of chaotic mixer design and operating conditions on morphology development in immiscible polymer systems. Polymer Engineering and Science44(3) 407-422.
Potente H. Ansahl J. Klarholz B. (1994). Design of Tightly Intermeshing Co-Rotatin Twin Screw Extruders Intern. Polymer Processing IX Hanser Publishers Munich. Book ISBN 978-1-56990-516-6