Micro-jet Cooling by Compressed Air after MAG Welding

Open access

Abstract

The material selected for this investigation was low alloy steel weld metal deposit (WMD) after MAG welding with micro-jet cooling. The present investigation was aimed as the following tasks: analyze impact toughness of WMD in terms of micro-jet cooling parameters. Weld metal deposit (WMD) was first time carried out for MAG welding with micro-jet cooling of compressed air and gas mixture of argon and air. Until that moment only argon, helium and nitrogen and its gas mixture were tested for micro-jet cooling.

[1] Wegrzyn T., J. Piwnik & D. Hadryś, (2013). Oxygen in steel WMD after welding with micro-jet cooling, Archives of Metallurgy and Materials. 58(4).

[2] Wegrzyn T., Piwnik J. & Hadryś, D. (2014). Acicular ferrite in micro welding technologies, Archives of Metallurgy and Materials. 59(2).

[3] Węgrzyn, T., Piwnik, J. Wszołek, Ł. & Tarasiuk, W. (2015). Shaft wear after surfacing with micro-jet cooling, Archives of Metallurgy and Material. 60(4), 2625-2630.

[4] Węgrzyn, T. Piwnik, J. Łazarz, B. & Tarasiuk, W. (2015). Mechanical properties of shaft surfacing with micro-jet cooling, ISSN 1392-1207. Mechanika. 21(5), 419-423.

[5] Kurc-Lisiecka, A., Ozgowicz, W., Ratuszek, W. & Kowalska, J. (2013). Analysis of Deformation Texture in AISI 304 Steel Sheets, Solid State Phenomena. 203-204, 105-110, DOI: 10.4028/www.scientific.net/SSP.203-204.105.

[6] Lisiecki, A. (2014). Welding of thermomechanically rolled fine-grain steel by different types of lasers, Arch. Metall. Mater. 59(4).

[7] Golański, G., Zieliński, A., Słania, J. & Jasak, J. (2014). Mechanical Properties of VM12 steel after 30 000hrs of ageing at 600°C temperature. Archives of Metallurgy and Materials. 59(2).

[8] Tarasiuk, W., Gordirnko, A.I., Wolocko A.T., Piwnik, J. & Szczucka-Lasota, B. (2015). The tribological properties of laser hardened steel 42CrMo4, Archives of Metallurgy and Materials. 60(4), 2939-2943.

[9] Burdzik, R., Stanik Z. & Warczek, J. (2012). Method of assessing the impact of material properties on the propagation of vibrations excited with a single force impulse, Archives of Metallurgy and Materials. 57(2).

[10] Burdzik, R., Konieczny, Ł., Stanik, Z., Folęga, P., Smalcerz, A. & Lisiecki, A. (2014). Analysis of impact of chosen parameters on the wear of camshaft, Archives of Metallurgy and Materials. 59(3).

Archives of Foundry Engineering

The Journal of Polish Academy of Sciences

Journal Information


CiteScore 2016: 0.42

SCImago Journal Rank (SJR) 2016: 0.192
Source Normalized Impact per Paper (SNIP) 2016: 0.316

Metrics

All Time Past Year Past 30 Days
Abstract Views 0 0 0
Full Text Views 83 83 7
PDF Downloads 29 29 3