Computer-Aided Design of Steel Casting Taking into Account the Feeding Ability

Open access

Abstract

A new Computer-Aided Design approach is introduced for design of steel castings taking into account the feeding ability in sand moulds. This approach uses the geometrical modeling by a CAD-program, in which the modul “Castdesigner” is implemented, which includes the feeding models of steel castings. Furthermore, the feeding ability is guaranteed immediately during the design by an interactive geometry change of the casting cross section, so that a directional feeding of the solidifying casting from the installed risers is assured.

[1] Groem-Grzjimajlo, V.J. (1933). Steelmaking, Moscow, p. 408.

[2] Heuvers, A. (1943). Giesstechnik, Die Giesserei, Vol. 30, 201.

[3] Chvorinov, N. (1940). Giesserei, 27, 177-186.

[4] Pellini W.S. (1953). Trans. AFS,. Vol 61, 61-80.

[5] Namur, R. (1958). Giesserei Technisch-Wissenschaftlich Beihefte, N. 20, 1077-1087.

[6] Balandin, G.F., Tschebotarev, A.S. & Tschikunov, J.M. (1976). Casting, 21-23 (russ.).

[7] Polaykov, S. N. (1985). Casting, N. 11, 7-9. (russ.).

[8] Polyakov, S.N. (1989). Casting, N. 10, 18-19. (russ.).

[9] Hartmann, R., Poliakov, S., Popkov, V. & Martin A. (1998). Konstruieren+Giessen 23, 4.

[10] Korovin, V.M., Polyakov, S.N., Korotchenko, A.J., Polyakov, D.S. & Bast J. (2012). Russ., Foundryman 2. 29-35 (russ.).

[11] Tschebotarev, A.S., Tschikunov, J.M., Sladkova, L.A., Porozkov V.N. http://www.ruscastings.ru/work/168/2130/2984/6312.

Archives of Foundry Engineering

The Journal of Polish Academy of Sciences

Journal Information


CiteScore 2016: 0.42

SCImago Journal Rank (SJR) 2016: 0.192
Source Normalized Impact per Paper (SNIP) 2016: 0.316

Metrics

All Time Past Year Past 30 Days
Abstract Views 0 0 0
Full Text Views 92 92 21
PDF Downloads 35 35 12