Currently there is a constant development in the field of aluminium alloys engineering. This results from, i.a., better understanding of the mechanisms that direct strengthening of these alloys and the role of microalloying. Now it is microalloying in aluminum alloys that is receiving a lot of attention. It affects substantially the macro- and microstructure and kinetics of phase transformation influencing the properties during production and its exploitation. 7xxx series aluminum alloys, based on the Al-Zn-Mg-Cu system, are high-strength alloys, moreover, the presence of Zr and Sr further increases their strength and improves resistance to cracking.
This study aims to present the changes of the properties, depending on the alloy chemical composition and the macro- and microstructure. Therefore, the characteristics in the field of hardness, tensile strength, yield strength and elongation are shown on selected examples. Observations were made on ingot samples obtained by semi-continuous casting, in the homogenized state.
Samples were prepared from aluminum alloys in accordance with PN-EN 573-3: 2013. The advantage of Al-Zn-Mg-Cu alloys are undoubtedly good strength, Light-weight and resistance to corrosion. As widening of the already published studies it is sought to demonstrate the repeatability of the physical parameters in the whole volume of the sample.
 Kwak, Z., Rzadkosz, S., Garbacz-Klempka, A. & Krok, W. (2014). The Effect of Alloying Elements on the Microstructure and Properties 7xxx Series Alloys. Archives of Foundry Engineering. 14 (si. 4), 83-88.
 Kwak, Z. (2014). The Effect of Alloying Elements on the Macrostructure and Microstructure and Properties 7xxx Series Alloys of Selected Examples. Unpublished master thesis. Faculty of Foundry Engineering, AGH University of Science and Technology, Krakow.
 Kapturkiewicz, W., Burbelko, A.A. & Dąbek, P. (2006). Modeling of the aluminum ingots continuous casting, Archives of Foundry Engineering. 20(18), 137-138.
 Wróbel, T., Szajnar, J., Bartocha, D. & Stawarz, M. (2013). The Stand of Horizontal Continuous Casting of Al and its Alloys, Archives of Foundry Engineering. 23(3), 113-115.
 Skrzypek, S. J., Przybyłowicz, K. (2012). Engineering metals and their alloys. 234-236. Krakow: AGH University of Science and Technology Press. (in Polish).
 Dobrzański, L. A. (2004). Metallic Materials Engineering. Warszawa: Wydawnictwo Naukowo-Techniczne. (in Polish)
 Rzadkosz, S. & Staszczak, B. (2006). Effect of selected microadditives on the mechanical properties of aluminium alloys, Archives of Foundry Engineering. 18(1), 85-87.
 Altman, M. W., Lebiediew, A. Ł., Czuchrow, M. W. (1963). Pławka i litie spłewow cwietnych mietałłow. Moskwa.
 Adamski, C. & Piwowarczyk, T. (1979). Metallurgy and casting non-ferrous metals part I. Kraków: Skrypt uczelniany: AGH nr 700. (in Polish)
 Davis, J. R. (1999). Corrosion of Aluminum and Aluminum Alloys. USA: ASM International.