The article presents results of heat treatment on the high chromium cast iron. The study was carrying out on samples cut from the casting made from chromium cast iron. Those were hardened at different temperatures, then tempered and soft annealed. The heat treatment was performed in a laboratory chamber furnace in the Department of Engineering Alloys and Composites at Faculty of Foundry Engineering AGH. At each stage of the heat treatment the hardness was measured by Vickers and Rockwell methods, and the microscope images were done. Additionally based on images from the optical microscope the microstructure was assessed. Based on these results, the effect of hardening, tempering and soft annealing on the microstructure and hardness of high chromium cast iron was studied. Next the effects of different hardening temperatures on the properties of high chromium cast iron were compared. The study led to systemize the literature data of the parameters of heat treatment of high chromium cast iron, and optimal conditions for heat treatment was proposed for casts of similar properties and parameters.
 Kosowski, A., Podrzucki, Cz. (1981). Alloy cast iron. Krakow: University scripts.
 Studnicki, A. (2013). Role of selected modifiers in the crystallization of wear resistant chromium cast iron. Katowice-Gliwice: Ed. Commission Foundry PAN.
 Xiang, Ch. & Yanxiang, L. (2010). Effect of heat treatment on microstructure and mechanical properties of high boron white cast iron. Materials Science and Engineering. A 528, 770-775. DOI:10.1016/j.msea.2010.09.092.
 Kopyciński, D. & Piasny, S. (2012). Influence of tungsten and titanium on the structure of chromium cast iron. Archives of Foundry Engineering. 12(1), 57-60.
 Studnicki, A. (2009). Influence of selected modifiers on crystallization curve of chromium cast iron. Archives of Foundry Engineering. 9(3), 181-188.
 Studnicki, A., Jura, S. & Suchoń, J. (1998). The influence of chemical composition of chromiun cast iron on distribution of carbides size. Solidification of Metals and Alloys. 37, 17-37.
 Kopyciński, D. (2009). Analysis of the structure of castings made from chromium white cast iron resistant to abrasive wear. Archives of Foundry Engineering. 9(4), 109-112.
 Kilarski, J., Studnicki, A. & Przybył, M. (2003). Distribution of hardness and microhardness of matrix of chromium cast iron on section casting. Archives of Foundry Engineering. 3, 274-279.
 Kopyciński, D., Guzik, E. & Piasny, S. (2011). The structure of abrasion-resisting castings made of chromium cast iron. Archives of Foundry Engineering. 11(3), 61-64.
 Kawalec, M. (2014). Microstructure control of high-alloyed white cast iron. Archives of Foundry Engineering. 14(1), 49-54.