Effect of the Carbides and Matrix on the Wear Resistance of Nodular Cast Iron

Open access

Abstract

This paper presents the results of the abrasive wear resistance of selected types of nodular cast iron, including ADI, cooperating with quartz sand and 100 grit abrasive paper. It has been shown that carbides in nodular cast iron cause an increase in wear resistance of 6 to 12% depending on the surface fraction of the carbides and type of the matrix. For the same unit pressure the mass loss of the cast iron cooperating with quartz sand is many times larger than the cast iron cooperating with abrasive paper. For both abrasives the highest wear resistance showed nodular cast iron with upper and lower bainite and carbides.

[1] Pietrowski, S. & Gumienny, G. (2010). Bainite obtaining in cast iron with carbides castings. Archives of Foundry Engineering. 10(1), 109-114.

[2] Gumienny, G. (2010). Bainitic-martensitic nodular cast iron with carbides. Archives of Foundry Engineering. 10(2), 63-68.

[3] Gumienny, G. (2010). Chromium and copper influence on the nodular cast iron with carbides microstructure. Archivesof Foundry Engineering. 10(4), 47-54.

[4] Gumienny, G. (2011). Wear resistance of nodular cast iron with carbides. Archives of Foundry Engineering. 11(3), 81-88.

[5] Gumienny, G. (2012). The Effect of Nodular Cast Iron Metal Matrix on the Wear Resistance, Archives of Foundry Engineering. 12(2), 179-186.

[6] Rapiejko, C., Fouvry, S., Grosgogeat, B. & Wendler, B.G. (2009). A representative ex-situ fretting wear investigation of orthodontic arch-wire/bracket contacts. Wear. 266, 850-858.

Archives of Foundry Engineering

The Journal of Polish Academy of Sciences

Journal Information


CiteScore 2016: 0.42

SCImago Journal Rank (SJR) 2016: 0.192
Source Normalized Impact per Paper (SNIP) 2016: 0.316

Metrics

All Time Past Year Past 30 Days
Abstract Views 0 0 0
Full Text Views 67 67 23
PDF Downloads 16 16 8